plus it just smoked a 65 turn motor in about 10 mins. help....
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
rockn
Rock Crawler
chaffin
dang your a dennis the mennis kid. maybe you should get in to rockets thay have no motors to burn up. just blow up:lmao::mrgreen:
dang your a dennis the mennis kid. maybe you should get in to rockets thay have no motors to burn up. just blow up:lmao::mrgreen:
rockn
Rock Crawler
do we have to maybe its a sighn that you lost all are numbers
MDcrawler72
Rock Crawler
What kind of battery Lipo, Nimh and voltage?
Chaffin
Rock Stacker
3 Cell Lipo... 2.2 mah 11.1 v
Chaffin
Rock Stacker
Wow yall are just talking my ear off... its crazyy
ok:shock:
MDcrawler72
Rock Crawler
Well your bec has no effect on your motor. For a standard I would set your bec to 6 volts. Running 11.1 volts to a cheapy motor, generates heat, along with water/mud eating away your brushes. How is your gear mesh? Do you feel any binding in your drivetrain? I would invest in a decent 35T motor in the $40-$50 range that can handle the voltage and is rebuildable.
How close are you to Murrieta?
-Steve
How close are you to Murrieta?
-Steve
Chaffin
Rock Stacker
I dropped my BEC down to 5.5 but Its getting glitchy so I am going to bump it up to 6 maybe 6.5v... My mesh is good when the motors are installed... There might be some binding in the drivetrain or the differentials I have to take them apart and get new bearings and lube everything up but I dont think that would cause me to smoke through 8 motors that quickly... Maybe but I dont know.... Me and my buddy Steve have got some 12t on its way here and then if I burn through this one I am thinking of getting a Holmes Hobby 14t motor... And probably a Tekin 35T motor... I am on Camp Pendleton but on the Weekends I try to make trips up there since my mother in Law lives in Lake Elsinore and my buddy Steve lives in Murrieta.... Me and Steve are stumped on this problem I am seeming to have right now and am open to all sorts of help... Me and A friend thought that because my ESC has been wet that when it dried out it causes to much power to push out sometimes which causes me to smoke the motors ....
rockn
Rock Crawler
I still have a motor for you chaffin if u want it and if u burn its ok u wont have to replace it
MDcrawler72
Rock Crawler
Shoot me a pm if you will be in Murrieta this weekend, I might be able to meet up with you depending on the time.
- Steve
CHiLOC
Pebble Pounder
pull out your motor (if one is in it) and roll the truck. in a perfect world itll spin like butter. but since water is involved in all your outings your bearings are most likely shot. i replaced mine and dont get nearly as wet as you:shock:
I did this on sunday its not smooth as butter but its not sticky or binding up, chaffin didnt like me doing that because here was no smoke or fire:lmao:
Fireman Rich
Newbie
Here's my SCX10. Went out today for about 15 mins just to drive it and get these photos. later
This area is too big for a scale crawler. But it was cool just to see a little bit of this machines ability!!!!!!
This area is too big for a scale crawler. But it was cool just to see a little bit of this machines ability!!!!!!
rockn
Rock Crawler
yeh its to clean:mrgreen: but we all can fix that for yea:twisted:
Chaffin
Rock Stacker
I wish i could do a rebuild day... We all know the Game Warden needs some TLC... I am thinking that I should stop playing in that deep of water.. I mean I cant cut all the water out but I cant play in hella deep water