My WPL C24 1st gen

[W1ck3d0n3]

Well I bought myself a wpl c24 1/16th scale Toyota and it was the fist gen toy+ grade, but now it's full hobby grade and has a new paint job.

ESC - Hobbywing 1060
Survo - Towerpro MG92B
Recver - Flysky FS-IA6 6ch
Motor - stock

Sent from my SM-G991U using Tapatalk

 

[W1ck3d0n3]

Ok got more done. Did the seat and floor today. I used some Mexican blanket lookin ribbon I picked up at Hobby Lobby, and the floor I used black felt I got at Dollar General.

Sent from my SM-G991U using Tapatalk

 

[Brake Weight]

Seats look nice.

 

[W1ck3d0n3]

Finished up the interior. The dash and steering wheel is painted, and I added some crushed pop cans I picked up at Hobby Lobby. I used my tweezers to crush them.

Sent from my SM-G991U using Tapatalk

 

[2471:24]

Looking good.

 

[Undead Jeeper]

Ditto x2. Nice seat cover. ;-)

Love these "poor man's Trail Finder"..

 

[W1ck3d0n3]

I added some 1/4in (6.35mm) lead wire to the rims to add some wight down low to help the truck crawl and not roll over soo easily. Always wear rubber gloves when working with lead because it can absorb through your skin and possibly give you lead poisoning.

Sent from my SM-G991U using Tapatalk

 

[W1ck3d0n3]

Finished painting the taillights and drilled 3mm holes for lights when I git a light for this truck.

Sent from my SM-G991U using Tapatalk

 

[W1ck3d0n3]

I was able to weigh the wheels with the new weight. I don't know what the stock weight is tho.

Sent from my SM-G991U using Tapatalk

 

[iRIsHsUicIDe59]

What ever happened to this build?

 

[W1ck3d0n3]

What ever happened to this build?

I still have it, I just haven't updated it in a while so here you go.
So heres what I've done to this little truck
I have printed a bull bar, new rims, a cabover camper, and a new electronic tray and I got a new servo as well, I put a Wpl-bc-V2 esc/recver. The camper is painted to look like the one I grew up camping in.

 

[JatoTheRipper]

Nicely done! I really like these little WPL trucks, but I don't have the patience to fabricate everything required to make them good.

 

[itstoobright]

Very cool!
I have a C44 (my first non-micro crawler years ago) and I have put that thing through a ton, it has even been on multiple long roadtrips!
I need to transfer the thread over from SBG sometime soon.

 

[W1ck3d0n3]

The C24 has new rims, took a little over 9hrs to print.

 

[itstoobright]

Nice! I printed some Land Rover style ones for my C44 and it took most of the day!