New SSD Diamond Aluminum SCX10 Axle Housings

[STANG KILLA SS]

the hits keep coming!:shock:"thumbsup"

 

[Dready]

Is it the picture or does that centre pumpkin look Enormous?

 

[Jimmy1971]

Just noticed that the rears are available at rpp but not the fronts yet. Their new c-hubs and knuckles are there too.

 

[STANG KILLA SS]

probly just the picture. most of the previous SSD axles the pumpkin size is within 1mm or so of the stock Axial housing. the integrated upper link also gives the illusion of a larger pumpkin.

correct. SSD always released the rear first, then the front.

 

[joe122]

Wow, looks just like a Fab9 Ford rear end.......NICE!

 

[SSD]

Is it the picture or does that centre pumpkin look Enormous?

Narrow axle and 13mm OD tubes make it look bigger than it is.

 

[Bananaclip]

I was getting ready to say that the smaller diameter tubes is giving the illusion.

 

[hotrodsoup]

Oh damn!!!!!!

 

[Jus]

Terrible timing. I just BARELY bought my first scx curries a couple weeks ago.

Very nice. I love the one piece aspect, especially the built in 4 link. The fewer bolts I have to worry about keeping tight the better.

 

[yotapower07]

I want!!!!

 

[trig n tahoe]

Another sick ass product. Like I said SSD has some serious style, ordered c's and knucks on Friday. Hope they are like the rest of there stuff, I should be very happy :mrgreen:

 

[Bogncrawl]

Looks like I've gotta build another truck.

 

[1beatjeep]

Oh damn Thats even bigger then the Dana 60 axle housing...

 

[c0bra]

any idea how long till the front axle comes out?

 

[SSD]

Oh damn Thats even bigger then the Dana 60 axle housing...

Our D60 and Diamond axles are only around 1mm larger than the stock SCX10 axle pumpkin.

 

[AtlRccrawler]

if by hits you mean you are going to be hitting rocks like crazy then yes this will, what we need are smaller pumpkins not fancy new dress axles that go around the way oversized axial gears, sorry for the rude post but its the truth, i mean how hard can it be to make a smaller pumpkin axle with new over and underdrive gear sets.

 

[4RunnerKid]

if by hits you mean you are going to be hitting rocks like crazy then yes this will, what we need are smaller pumpkins not fancy new dress axles that go around the way oversized axial gears, sorry for the rude post but its the truth, i mean how hard can it be to make a smaller pumpkin axle with new over and underdrive gear sets.

so i assume you're designing smaller internals that take the same abuse that Axial stuff does? awesome, thanks! we're all (im)patiently waiting.

 

[altd896]

if by hits you mean you are going to be hitting rocks like crazy then yes this will, what we need are smaller pumpkins not fancy new dress axles that go around the way oversized axial gears, sorry for the rude post but its the truth, i mean how hard can it be to make a smaller pumpkin axle with new over and underdrive gear sets.

It obviously harder than it looks cos I seem to recall theres a lot of posts in the Ascender section of "how do I fix the torque twist", a trait that's inherent in a ring & pinion axle design with a quite high ratio which is what's going to happen in a small housing.

But by all means feel free to dip into your pocket & re-invent the crown wheel & pinion & locker & housings.
Be sure to r&d those gear sets good, we want them to be virtually indestructible. Oh & keep the price down, they're smaller than Axial do that's less metal so they should be cheaper.


Meanwhile back in the real world,
good job SSD-RC,
some of us likes what we see, like enough to own in fact, I've got the Wraith front & rear axles already.

 

[steven318is]

what about the traxxas 1/16 crown wheel and pinnion for the smaller 1.9 trucks theres a jeep here on the 1.9 section with steel axles that he made and they are holding up. or a worm drive axle that looks scale would be nice:mrgreen:

 

[SSD]

Product details are up...

Diamond Rear Axle for SCX10 (Grey)

Diamond Rear Axle for SCX10 (Black)