Lentsnh2012
RCC Addict
Don't mind that post.
A G6 is a newer version of the SCX10 platform. It has the same lay out but with a different body and zero electronics.
Stick with the Jeep Rubicon RTR. "thumbsup"
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
New to the forum and looked to buy a RC4x4
- Thread starter Jeep757
- Start date
Don't mind that post.
A G6 is a newer version of the SCX10 platform. It has the same lay out but with a different body and zero electronics.
Stick with the Jeep Rubicon RTR. "thumbsup"
Jeep757
Pebble Pounder
Current planned setup.
Engine: TorqueMaster Pro 540 27T or 35T
ESC: Holmes Hobbies TorqueMaster BR-XL WaterProof ESC
Servo: Savox's (0231mg & 1210sg) but dont know what to look for with regards to the specs.
Misc additions planned:
AX04034 - 2012 Jeep® Wrangler Unlimited Rubicon Roof
AX30550 - SCX10 TR Links Set - 12.3" (313mm) WB
Thanks
.
Engine: TorqueMaster Pro 540 27T or 35T
ESC: Holmes Hobbies TorqueMaster BR-XL WaterProof ESC
Servo: Savox's (0231mg & 1210sg) but dont know what to look for with regards to the specs.
Misc additions planned:
AX04034 - 2012 Jeep® Wrangler Unlimited Rubicon Roof
AX30550 - SCX10 TR Links Set - 12.3" (313mm) WB
Thanks
.
Last edited:
allanon1965
I wanna be Dave
very good combo, I run 2 HH motors, a 30T TM Pro and a 27T TM Sport
both are well worth it! I havent got the BR-XL yet, and am running on the factory axial ESC's at the moment with CC BEC on each for 3S
Jeep757
Pebble Pounder
are Venom Li Po batteries any good?
Lentsnh2012
RCC Addict
Most members run Turnigy lipos on here. But most lipo batteries are built with the same construction, so you're basically paying for the name.
FYI, the 313mm link upgrade kit comes with a steering upgrade kit already in it, so you don't have to buy the AX30426.
When you're looking for a servo, the more oz. in. of torque, the merrier. Look for a servo with at least 200 oz. in. @ 6.0v. So, both of those Savox servos will work its just a matter of how much you want to pay for a servo.
Jeep757
Pebble Pounder
Thoughts on these to batteries? both from Hobbyking.com
Turnigy 5200mAh 2S 30C Hard-Case Car Lipo Pack (ROAR APPROVED)
or
Turnigy 5000mAh 2S 30C Lipo Pack
with this charger: from Hobbyking.com as well
Turnigy Accucel-6 50W 6A Balancer/Charger w/ accessories
Turnigy 5200mAh 2S 30C Hard-Case Car Lipo Pack (ROAR APPROVED)
or
Turnigy 5000mAh 2S 30C Lipo Pack
with this charger: from Hobbyking.com as well
Turnigy Accucel-6 50W 6A Balancer/Charger w/ accessories
Last edited:
johnnyh66
Scale Detail Engineering
There's cheaper lipos but Venom doea stand behind their products and will replace dead lipos.
