ninetwofiveRC
Quarry Creeper
might put this in it.. well see 
and tires should be here tomorrow!
and tires should be here tomorrow!
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
ninetwofiveRC's Bronco
- Thread starter ninetwofiveRC
- Start date
pantablo
I wanna be Dave
that's a nice Bronco! I love the cc-01's.
What "Brentwood" are you in (what state)?
What "Brentwood" are you in (what state)?
ninetwofiveRC
Quarry Creeper
thanks! it looks better now! ill get some recent pics! and yea me too.
and Brentwood CA. in Nor Cal. not Southern Cali..
ninetwofiveRC
Quarry Creeper
new rims and tires! and installed a 55t integy lathe and window tint.. lol better pics soon!
m1009cucv
RCC Addict
looks good!! i have a mog, hop to finish it later tonight
ninetwofiveRC
Quarry Creeper
thanks man.
Okay, I've got to sell some s#%, I want a CC-01! That Bronco looks great "thumbsup". I just can't understand why the Bronco is $257 (on Tower), Unimog is $185, and the Land Cruiser is $170. What gives? Is the body the only diffeence in those kits? I can see a few dollars difference for different bodies but a $90 difference, WOW :shock:.
Did you try this ezrun setup in it? I was wondering how one of those would do in a CC-01. I've got some ezrun stuff in my fast rc's and those esc's are awesome.
might put this in it.. well see
and tires should be here tomorrow!
ninetwofiveRC
Quarry Creeper
thanks man!
and really? i paid $190 for mine. try rpphobby.com, i think there cheaper there.
ninetwofiveRC
Quarry Creeper
whats ezrun? this is a integy crawler brushless motor and esc.
and no, havent tried it yet.
Tru3Racing
Pebble Pounder
Ezrun is what its called.
It looks like a rebranded Ezrun/hobbywing motor. I can't see the esc to tell if it's a ezrun or not. Ezrun is just a brand name. There are alot of manufacturers selling the motors and esc's just rebranded. I've seen them as turnigy, speed passion, ezrun, tacon, hobbywing and probably more.
Just checked. Yep, $190. I always check Tower first because I'm a member of their super saver club so I get emails with coupon codes. When I get ready to order, I'll get them to price match.
ninetwofiveRC
Quarry Creeper
oh ok, yea its a integy esc also
ninetwofiveRC
Quarry Creeper
cool! get one!
ninetwofiveRC
Quarry Creeper
did a little run with my buddy today.
flexin out the bronco
hopefully gunna start making my rear bumper/swing out tire carrier and get a whip cb atenna! :mrgreen:
flexin out the bronco
hopefully gunna start making my rear bumper/swing out tire carrier and get a whip cb atenna! :mrgreen:
Badmuthatrucker
Quarry Creeper
I've tried one of those eZrun/Hobbywing/... 32 turn crawler combos in a CC.
The gearing is all wrong. It cogged and struggled to lift a wheel onto my foot and was crazy fast. They only have a 380 size core in them, so along with being non sensored, they do a lousy job of dealing with the tall gearing.
If you want to use a GRU they would be fine, but you are better off just using a 55 down to 75 turn motor with the esc switched to brush mode so you can still enjoy the wonders that a hold brake brings to CC01 world. They need one.
The gearing is all wrong. It cogged and struggled to lift a wheel onto my foot and was crazy fast. They only have a 380 size core in them, so along with being non sensored, they do a lousy job of dealing with the tall gearing.
If you want to use a GRU they would be fine, but you are better off just using a 55 down to 75 turn motor with the esc switched to brush mode so you can still enjoy the wonders that a hold brake brings to CC01 world. They need one.
ninetwofiveRC
Quarry Creeper
ninetwofiveRC
Quarry Creeper
thanks man, just running 1.9 mud slingers and stock shocks.
