nissan patrol GQ-gr "rock Juice"

[airship]

hi all, in this week i have started a new project... my personal patrol gq-gr
chassy milled and projected by me whit independent coil spring and damper like real one, axial axle and custom made by myself beadlock wheel, at thi moment there are some flat iron but revisited and cutted by me.
today i have completed the front bumper whit inox licence plate and delrin fairlead for the whinch i'll install inside the body...
next work to do... rock slider and rear bumper ... after this i'll start to mill one transfer case i have projected that include a 2 gear speed and a dig system, the motors will be installed in the front of the chassy.
regard the decoration layout ... i will make it all orange whit flat black front
here some photo, i hope you like it and sorry for my bad english;-)
as yo can see from the photo... the patrol body is made by myself and the measure are perfect for the axial axle and the tire while in twist dont touch the body.

 

[Recce01]

Nice work man!

 

[ColquittCustom405]

Nice work man!

No! Awesome work!!

That bumper is money dude!! Looks beefy

 

[crunky]

Getting jealous already, very awesome work !!!
I was wondering how soon it would be until one of these bodies popped up in a build thread. Your project is going to be a hard act to follow.
Top job !!!
Awaiting the next update eagerly.

 

[airship]

thanks really thanks a lot guys!!!!
i have done an incredible work to do this body, it is done all by myself, first i have drowing it on 3d after on a milling program i have created all the mill pattern... after this i have milled ... after sand paper to smooth all i like and make a good finish, after this i have built mt personal vacuum forming machine and then... forming the patrol

if someone are interested into a photo of my vacuumforming machine just ask;-)

love do all i immagine and fortunately my hand follow my mind and heart.

ops...sorry for my bad english

 

[wepn X]

thats wicked bud you've got some skills mate , keep the pics comin.
dont worry about your english a picture can say a thousand words...
"thumbsup""thumbsup""thumbsup""thumbsup""thumbsup""thumbsup""thumbsup""thumbsup""thumbsup""thumbsup""thumbsup""thumbsup""thumbsup""thumbsup""thumbsup""thumbsup""thumbsup""thumbsup""thumbsup"



azwa.

 

[airship]

thanks again...
i have done some more work....this time i have built and projected... ops projected and built one particular component!

a transefer case whit integrated dig unit whit 3 position ;-)

i have just finished it and if you want to see here there are a shot video to show how it works

hope you like it


at this link on my youtube channel there are a video

http://youtu.be/tVtLff9Wouo

 

[Szczerba]

Awesome truck. The stance and suspension look perfect! That wheel and tire combo are nice. Waiting to see how it looks painted up!

 

[airship]

thanks ...
here there are some new photo

 

[STANG KILLA SS]

what wheels are those?

 

[crunky]

axial axle and custom made by myself beadlock wheel

do you read or just scan pics.

( sorry man, had to )

 

[airship]

some more work today...
i have mill the front grill to give to this my car a realistic look
after this i have machined a master for vacuum forming the clear lens for the direction lamp and the same i'll do for the head one

add a snorkel and more detail... hope you like it

 

[ROSS]

DAMN!!!!!!! You have mad skills!!!!


Do you use a cnc machine or is it all done on a hand mill??

 

[PCHILNSF]

Great looking wheels you made.They look like the RC4WD Dick Cepik wheels but all silver.Keep up the great work.

 

[airship]

DAMN!!!!!!! You have mad skills!!!!


Do you use a cnc machine or is it all done on a hand mill??

thanks ross!!! yes i use a cnc mill home made obviusly

Great looking wheels you made.They look like the RC4WD Dick Cepik wheels but all silver.Keep up the great work.

:roll: PCHILNSF thanks ;-) but the look like mine:mrgreen:

 

[ROSS]

thanks ross!!! yes i use a cnc mill home made obviusly

i only ask, because if your setup allows you to replicate in mass, then you could make some money on custom grills...

for example....
tamiya clodbuster body: make grills for both chevy and GMC bodies
or make grills with different mesh designs.

 

[greenjk]

Looks great, you do awsome work, but why spoil such a nice scale look with holes drilled in the body for the post's when there are much neater ways to mount the body.

 

[airship]

ross just ask me and i try to do my best


greenjk you are right.
the start of this project is for a rock vehicle, quick project and only for fun, if you see my other creation you dont see body mount post... after i have started the project i have dicided to make it more real than i can...

but i'm not worry about the hole ;-) i have just in mind how to dont show them...

i'll installa a roof tent on the top like this i have done by myself... and on the front i will create an elastic mesh. if after this work i dont like the hole... i'll swich on my vacuum forming machine and do another body.

the above photo show a roof tent i have created... and i thik it will be perfect for this patrol...

 

[airship]

greenjk look at this chevy i have built... there are no body mount hole ;-)
the body stay in place by 4 neodimium magnets.

if i post to much photo or wrong to write in english please advise me and give me an help.

 

[Walldog]

awesome work sir, i for one would love to see this "homemade" cnc "thumbsup"