crawlinghulls
Rock Crawler
OCK is proud to announce the 2nd event in our Summer 2015 Series!!
When: May 24, 2015
Where: Chatfield Hollow State Park, Killingworth,CT
381 CT-80, Killingworth, CT 06419
As usual, we will be running the following classes:
2.2 pro - three courses
2.2s - three courses
Trail/scale class - two courses (we set 12 inch gates, basically class 2, but any scaler can run)
*We welcome any ability level and will accommodate accordingly.*
Course setting - 8:15
Tech/reg - 9:30
Drivers meeting - 9:45
Course 1 -- immediately following Drivers meeting
We're hoping to see you all for this second comp of 2015.
Our Scale/Trail Rules
Front steer only
4.75 max tire height (measured under weight)
Front and rear tires may not extend beyond the front and rear of body
Wheelbase must match fenderwells +/-.5 inch
Winching allowed
Bumpers front and rear must be present (this can be replicated by the body for no scale bonus)
Scale points max at -20
Hard body -10
Frame mounted servo -5
Metal front and rear bumpers -6
Metal sliders -4
Individual scale items -1 each
Full interior -5
Full driver figure -5
So it's pretty easy to max it out - just trying to encourage a more scale appearance
When: May 24, 2015
Where: Chatfield Hollow State Park, Killingworth,CT
381 CT-80, Killingworth, CT 06419
As usual, we will be running the following classes:
2.2 pro - three courses
2.2s - three courses
Trail/scale class - two courses (we set 12 inch gates, basically class 2, but any scaler can run)
*We welcome any ability level and will accommodate accordingly.*
Course setting - 8:15
Tech/reg - 9:30
Drivers meeting - 9:45
Course 1 -- immediately following Drivers meeting
We're hoping to see you all for this second comp of 2015.
Our Scale/Trail Rules
Front steer only
4.75 max tire height (measured under weight)
Front and rear tires may not extend beyond the front and rear of body
Wheelbase must match fenderwells +/-.5 inch
Winching allowed
Bumpers front and rear must be present (this can be replicated by the body for no scale bonus)
Scale points max at -20
Hard body -10
Frame mounted servo -5
Metal front and rear bumpers -6
Metal sliders -4
Individual scale items -1 each
Full interior -5
Full driver figure -5
So it's pretty easy to max it out - just trying to encourage a more scale appearance
Last edited: