It’s been a few years since I have seen an Orlandoo. They have come a long ways. Looks cool. What’s the specs on that build?
Thank you, Saltrock
these are some of the specs due to modifications..
OH32X01 kit
Extended Wheelbase: from 8,9cm to 11,6 cm
Total weight with battery: 119 grams
Brass weights: front 18 grams + rear 8 grams = total 26 grams
Motor: N20 300rpm brushed
Upgrade smooth ESC: 2x ASX24-Crawler:
ASX24-Crawler
Shocks: front stock, rear SCX24 shock
Custom links: lower rear M2 tubes w/ M2 rods, lower front white M2 tube over stock links (for now)
Custom Wheels: narrowed original wheels glued to narrowed 1.0 wheels
Custom tires: cut-N-shut INJORA 1.0" Comp Pin Tires (55*20mm)
Front tires: 43-44mm
Rear tires: 38mm
Overdrive effect: about 12%
Custom skid plate extension
I’m waiting for upgraded shocks and servo.
But now that the wheelbase has become so long, I’ll make 50mm tires for the front and have the 43mm tires on the rear.
Btw, I’ve shaved the sidewalls of the tires and was able to fix most of the wobble
So they are even more soft and grippy.
That will be shaved tires Part 3 and larger custom cut-N-shut tires Part 4.
Last might be brushless. But first I want to see how far I can get using this brushed setup.
It needs dig
)
