Paintball Gun Help!!!

[KFX700]

I got a high voltage paintball gun and a 16oz co2 tank but when i connected it theres a small hole under the paintball gun that leaks co2 and drains it all within a hour..do u no how to stop it from leaking..thanks"thumbsup"

 

[Shaun]

Check O-ring, install new O-rings. Screw that f*cker in really tight.

 

[TurnThePage]

Check O-ring, install new O-rings. Screw that f*cker in really tight.

yep! and that hole it just there so when you unscrew the tank all the co2 dont rush back at ya. if that doesnt work get a new tank

 

[Itch]

Its the tank O-ring. Replace and should be good to go.

 

[dieselfuel]

Screw the c02 shit and get a decent carbon fiber compressed air tank. But seriously its probably the o-ring on the tank regulator.

 

[KFX700]

k thanks alot guys ill replace it and c what happens"thumbsup"

 

[TurnThePage]

Screw the c02 shit and get a decent carbon fiber compressed air tank. But seriously its probably the o-ring on the tank regulator.

he has a high voltage man he dont need n2:lol:

 

[RcFanatic92]

if you have a wire covered line from ur tanks screw in area on ur gun to ur regulator, then ditch that and get a plastic tube, i'm not sure the exact material but its like plastic, because that wire or i like to call mesh tubing is a huge leaker after you start taking it apart a few times.

 

[KFX700]

"thumbsup"yea its just a high voltage to play around with...but thanks for the help and ill lyk what happens

 

[Itch]

if you have a wire covered line from ur tanks screw in area on ur gun to ur regulator, then ditch that and get a plastic tube, i'm not sure the exact material but its like plastic, because that wire or i like to call mesh tubing is a huge leaker after you start taking it apart a few times.

Macroline is what your thinking of, but don't use that with CO2. Stick with the SS braided line, much better and more durable.

 

[Col_Sanders]

Add a little oil to that new o-ring too.