• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

possible 10T pinion

I emailed Neil at RW Racing and he replied back that he will have 9t and 10t .6 mod 2.3mm bore available in two weeks. He told me to email back in a couple weeks if I wanted some. Prices are about $5.02 each and shipping to the US is $3.86 or so.
 
Thanks for the update. I'll be getting a couple of each! With the HB Rovers I installed, the 11t pinions are barely cutting it.
 
Hello, So i do not have a CC, my buddy does, and we found a perfect fit 10t pinion

http://www.rampagehopups.com/product.sc?productId=540&categoryId=26

It is from My RS10 I switched to the 8t pinions and offered him my 10t to try out. They fit perfect and do lower the gear ratio a little. The 8t might also work but we have not tried them as i do not want to take them back out of my crawler. Just thought i would let you all know that there is a 10t and possibly an 8t pinion that will work for you CC.

Rob is not the only one with these pinions but my interactions with Rob have been great and he is very helpful.
 
I thought the RS10 used 48p gear pitch vs. .6 mod. The metric .6 mod pitch is something like 43p vs 48p. So how is the gear mesh? Is it eating up the gears?
 
It hasnt eaten up the gears yet. He has only been through two charges so far, about 2.5 hours of solid crawling. So far the gears are holding up, we have even tried to get them to tear up (he floored it while i held onto the tires to keep them from spinning) and they are not slipping yet. I know that 2.5 hours is not a whole lot of testing time but so far they seem to be working great. I will say more later once we have done alot more crawling.
 
RW Racing has 11t, 10t and 9t available now. Haven't checked to see if they're on the website, but I got an email last week saying that they would be back from the hardener last Friday. I have a couple of each coming this way. Now I just need to dig my CC out of the box it's been in for over a year and try to make something out of it.
 
Karl said:
I got my 9t & 10t pinions from rw racing. They went in with no mods at all and work great!
Click to expand...

Mine showed up on Wednesday. Did you put them on the stock motors? I have the Banebot 390's, but I'm thinking of trying them on the stock ones first.
 
I installed them with the banebot 390's. The lower tooth pinions helped make up for my 5.5 tall rovers, and also helped the grade brake.
 
I realize that this is an old thread... hopefully some of the members are still around... with the pinions from RW did you go one smaller in the rear or just two 9s?
 
Orgnoi1 said:
Thanks for the response... I emailed the guy at RW... going to see about picking up 2 9ts and 2 10ts...hope it isnt going to be a lot considering the small order...
Click to expand...

I bought 2 9T's and 2 10T's from him. I think it was 25-30 bucks with shipping. It'll take a while to get them.
 
I AM curious about one thing... the 10t I have is a "press on" or so it looks.. is that right? and do they hold without slipping?
 
fabil said:
I use two 9T and works fine
Click to expand...
Press on or grub screw deal?
Cordwood said:
I bought 2 9T's and 2 10T's from him. I think it was 25-30 bucks with shipping. It'll take a while to get them.
Click to expand...
Did you ever get these?

Orgnoi1 said:
I AM curious about one thing... the 10t I have is a "press on" or so it looks.. is that right? and do they hold without slipping?
Click to expand...
x2

I am actually hoping these 10t are metric and will fit on a 540 shaft like the novak 11t .6 mod , i am trying to use the 10t for my og hilux.
 
You must log in or register to reply here.

Similar threads

N
Tamiya Bruiser Clone Build - Automatic 3 speed gearbox
Replies
17
Views
9K
JatoTheRipper
JatoTheRipper
B
93T Spur 10T pinion vs a 4:1 reduction
Replies
16
Views
3K
rickb-123
R
Back
Top