Post all your Suzuki Samurai's!!!!

[Der Kampfer]

That's one nice Sammy what are the details on it? do you have a build thread?

Sorry no build thread. but specs are:

custom tig welded frame based off of a shortened set of scx10 rails
rc4wd toyota axles
mayhem beadlocks painted to look like Allied beadlock soft 8's
rc4wd r2 trans
HH cobalt mini puller
rc4wd bilstein lookalike shocks(have the longest ones i could get and they still limit my leaf spring travel!!)
Proline tsl sx's(close enough to the regular tsl's I have on the real rig)
zuk body painted and dented to look my real tintop.

 

[twissted]

Rolled Zuki build

Boo

 

[twissted]

Parts list

boo hoo

 

[schiesz]

Here is my little Sammy (and his thread). It is still in progress, of course. Hope to have some kind of cage and drop bed in the future.

I just found this thread today and saw one that looks just like mine here. Nice rig Keith!

 

[promitheas]

 

[oahuzuki]

Holy $h@T IT'S 1:24 scale! :lmao:

before exo

My 1:1 up front, got the sj410 followin "thumbsup"

stock on the rut

 

[Desert Rc]

So I saw this thread today, although I'm always on the hunt for the perfect streetable 1:1 I do have a little Sami in my arsenal. All the work is Pinchflats...thanks again bud.

Very simple but effective and light cage design, leaf sprung front, yada yada yada.

 

[d'sxj]

heres mine

http://

http://

 

[badhoopty]

i wish axial hadnt stopped making the trail ranger...

 

[Dready]

Work in Progress sorry no build thread for this one.

 

[meanbgreen]

some pretty sweetzuks

 

[diesel kawboy]

Here's mine. It's a work in progress.
Homemade chassis
Scx10 frame
Wraith axles
RC3WD d44 knuckles
RC3WD Mickey Thompson steelies
2.2 pit bulls
Suzuki samurai hood was made out of aluminum in a press mold made on my buddy's cmc mill.

 

[Shape_Shifter]

I sure wish I could find one of these Sammi bodies.... Any leads?

Meanwhile, here is the one I build a while back. I repowered it with a 1.9 multiport EFI and AC. Old Man Emu suspension and 4:1 transfer case.

 

[meanbgreen]

In the back ground
jeep cherokee angle - YouTube

 

[Pabust]

Mine:

Pretty much stock but with chromoly front axles, 4.57's, OME suspension, etc

If somebody releases a scale Samurai body i'll transform my Dingo into one

 

[Falon]

My buddies scaler

MRC Sami Rc crawlin - YouTube

My 1:1

 

[JoeConti]

I wish I can find a 1:10 scaler

here are my 1:1

 

[WVhillbilly]

Those are nice!
The blue one a 660cc turbo?

 

[1beatjeep]

When I first brought it home

Midway into the build

Gettin ready to hit the trails in Moab (2 years after I bought it)

Trail in Grand Junction...Billings Canyon

Oops...I mean here you can see what's underneath it...

Specs:
88.5 Sammy @ 100" WB
1.3L Stock Carb'd Motor
Stock Tranny
Stock Tcase w/ 6.5:1 gearing and twin sticked mounted in ZOR Snatch
2" Exhaust
'85 Yota Front w/ ARB, High Pinion 3rd, 5.29's (cryo and heat treated), Longfield shafts and hub gears with IFS hubs and brakes
'91 Yota Rear w/ Yota e-locker, cyro treated side gears, 5.29's (cryo and heat treated), stock shafts, '85 disk brake conversion
YJ spring over...custom frame mounts to keep everything as low as possible
1.5" DOM cage...seat cradle and gussets are HREW
15x8" 2.5BS Black Steelies
37x12.5 Super Swamper SSR's (they were on my jeep before I tore it down for its build)
x8000 winch with synthetic line

is this still on the trail?

 

[JoeConti]

Those are nice!
The blue one a 660cc turbo?

No, the blue one has a Toyota 1.5TDi with the stock transmission