Project Scrambler a CSC1 build!

[CoreyK]

Using foam's huh Pete? I don't use them.

 

[peej410]

i use rubbers too, gotta make sure theres no smart mouthed little kids runnin around

 

[CoreyK]

i use rubbers too, gotta make sure theres no smart mouthed little kids runnin around

:lol:

 

[Brainstain]

I wondered why the body looked funny in the first pic. After those last pix I realized it was because the front wasn't trimmed up to the grille. Looks pretty sweet now.

 

[Brandon]

Shocks look great! Any close ups? 8)

 

[1BadJeepBruiser]

Body looks much better with the front trimmed a tad bit. I am also curious about the shocks as well.

Mike

 

[peej410]

ill get more pics of the shocks today, all it really is, is a piece of 1/4in alum turned on the lathe with a hole drilled in it, i used picture hanging wire and CAed it in the "reservoir" then drilled a corresponding hole in the side of the shock cap and did the same. took maybe 3 minutes max

 

[Brandon]

ill get more pics of the shocks today, all it really is, is a piece of 1/4in alum turned on the lathe with a hole drilled in it, i used picture hanging wire and CAed it in the "reservoir" then drilled a corresponding hole in the side of the shock cap and did the same. took maybe 3 minutes max

Sounds cool, probably took 3 min with the right tools. I was going to do the same thing with my CJ8 build and the shocks you sent me 8)

 

[gregrocks90046]

i dont think im going to hack up the body either but time will tell.

c'mon peej! chop it!:twisted:

 

[Inclodneato]

looks great.

 

[peej410]

haha no chopping! i might tube the front fenders though and install some other stuff. i made some drings for the front bumper and i also found out that i can fit a titan body on the frame with these rock rails and all that so that will be my beater body.

 

[peej410]

here be the shock mateys. when the whole chassis goes in for powder coat ill be coating the shocks, links and everything else aswell

 

[CoreyK]

Nice work petey. I have some 18t springs for you mateyyy:lol: ;-)

 

[Brandon]

That looks sweet! Nice work

 

[peej410]

thanks! i just threw my titan runner body on it and drove it around... its pretty capable and way fun to drive. i dont think im going to make the deeper skids anymore. the mashers with foams work awesome, i think this is going to be my new setup.

 

[1BadJeepBruiser]

Damn dude that is sweet, what do I need to do to get you to turn down some tlt shocks like that for me??? The trekker would look 10X Better with shocks like that.

-Mike

 

[peej410]

30 bucks and your eternal soul!!!!! or just 30 bucks its about an hour worth of work to do 4 and get all the gold off. ext reservoirs are maybe 15 more..

 

[CoreyK]

just use easy off to get the gold off;-)

 

[peej410]

haha and i was sitting there for 5 min trying to get my lathe to take .001 of an inch off.

 

[CoreyK]

haha and i was sitting there for 5 min trying to get my lathe to take .001 of an inch off.

Haha:lol: