Projects

[cmyers1]

Thanks man dont worry about the brazing if ya wanna wait im buying a hobart mig welder so if ya want sometime come over with your materials and we will weld ya up one"thumbsup"

 

[foproy]

i am going to get a pair of pumpers to put on the ford soon, for the front i have an idea to take the bumper from a dingo and if it does not look right cut the brush gaurd off. for the rear i would like to do a simple tube design, would this be difficult with derlin? i am thinking of using 1?4 inch derlin rod with blocks holding the three rods together. something like this

except maybe straight, or with a 90 degree wrap on it.

 

[Slowbro]

Thanks man dont worry about the brazing if ya wanna wait im buying a hobart mig welder so if ya want sometime come over with your materials and we will weld ya up one"thumbsup"

Thanks I may take you up on that if I can't get this to work, I would rather use brake line since it is lighter but I'm not going to have much tubing on my truck. "thumbsup"

 

[cmyers1]

Thanks I may take you up on that if I can't get this to work, I would rather use brake line since it is lighter but I'm not going to have much tubing on my truck. "thumbsup"

You just let me know if does or doesnt! If not ride on over my way and we will break my welder in:mrgreen:

 

[KevMc]

Got some paint, waiting on the other front bumper to come in. Hopefully tomorrow. I stuffed Pro Line 2.2 foams in the Boggers, hopefully that'll help! Swapped out the 645 servo for a 7955TG unit. I swear that 645 I had was weak as water.

 

[easleycrawler]

That looks good man."thumbsup"

 

[limited77]

I have 2 more Pajero bodies if you get bored."thumbsup"

 

[limited77]

Well the Sammie got dunked today in my pond. I was letting William play with it and next thing I heard a kadouche. Needless to say everything appears to be fine. I scooped it up pretty quick. I really need to waterproof it. Lessoned learned though; not to let William play with so close to the pond just yet."thumbsup"

 

[cmyers1]

That suck man!! but at least it didnt mess anything up. How are you planning to water proof your rig?

 

[limited77]

dielectric grease balloons and silicone.

 

[cmyers1]

Gotcha be sure to watch the esc in that balloon:mrgreen:

 

[limited77]

Roger that. Just using a XL5 right now in it. Not gonna balloon it.

 

[cmyers1]

I'm gonna buy a small electronics box from radio shack and mount all my electronics in that and seal that bad boy up:mrgreen:

 

[easleycrawler]

I'm gonna buy a small electronics box from radio shack and mount all my electronics in that and seal that bad boy up:mrgreen:

That's what i'm doing to."thumbsup"

 

[cmyers1]

Yes sir also gonna plastic dip my servo"thumbsup"

 

[TODBLDZ]

That looks good man."thumbsup"

X2. that thing is sick kev. :shock:

 

[Monstergt]

Nice ride Kevin.

 

[TODBLDZ]

well i hacked up the old hilux bed i had today. gonna bob and dovetail it to give me a little more tire clearance and departure angle. still nee to rebuild the cage to fit. headed to get some brakeline shortly. got to have it ready for a week of bashing in texas next month.

 

[ittybitty]

That's looking really good Todd. Keep us update on the progress of the bed.

 

[easleycrawler]

Hey Todd, don't do to good of a job you might have to build me one around my tube work.:ror: