• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

RcBros Knuckle Weight System for VP XR10 and Wraith Knuckles

I have them cut, just working on getting the needed spacers for them.
 
Ordered on monday night- showed up today. Thanks for the speedy shipping. The weight system looks great and so does the pricing. "thumbsup"
 
Stock Axial XR10 knuckle holders now available!!

IMG_9539.jpg


Full 1/4" weights back in stock!
 
Sorry sir, still need to cut spacers. I'll pm u this weekend with a quick solution.
 
Which of your weight holders will work with HR XR10 knuckles? My Ax10 axle has the xr mod and I'd like some knuckle weights and holders from you. They look great!
 
I have a stock Wraith with Axial rockstar beadlock wheels. the rims are tapered from the hubs out. I was wondering if your system will work with this setup or if I have to run a VP hub style rim to use them.

Thanks
Red
 
redsawacs said:
I have a stock Wraith with Axial rockstar beadlock wheels. the rims are tapered from the hubs out. I was wondering if your system will work with this setup or if I have to run a VP hub style rim to use them.

Thanks
Red
Click to expand...

Red,
You will be able to fit some weight in the wheels. Being that the wheel tappers out from the center, you may not be able to fully load you wheels. However with some mild dremel modding you can stack the brass on the inside of the holder as well as outside.
 
FYI for anyone trying to run these knuckle weights with rc4wd sidebiter wheels or any other similar rc4wd wheel hex, these will not fit over the wheel hex.

I learned the hard way!
 
I noticed on your site that the .25 half weights were out of stock.

Question is can't a guy buy the full round and split them in 2 by himself?

Aside from having the .25 that are not in stock wouldn't that be the cheapest way to go?
 
cneill24 said:
Wont the weights get in the way of the tire contact?

Sent from my SGH-M919 using Tapatalk now Free
Click to expand...

Say what?

Are you sure you looked at the pics of exactly what weights we are talking about ?

Photo_8.png


These go inside the rim, there is nothing anywhere near the tire contacting anything.
 
You must log in or register to reply here.

Similar threads

T
WE RC ROCK Rules 2024
Replies
1
Views
2K
cooper_xl
cooper_xl
J
My capra "build"
Replies
6
Views
1K
Jefferson87
J
S
~TSS~ AR44 / SCX10.2 Brass Knuckles!
Replies
2
Views
7K
STANG KILLA SS
S
M
Micro Racer's Mil-Spec Mall Crawler
Replies
1
Views
1K
dmcchaser
dmcchaser
O
Another XR10 Build by a Total Noob
2
Replies
22
Views
9K
odomandr
O
Back
Top