Scx10 bad receiver?

[DTA510]

Sometimes I don't get throttle at all sometimes just a little sometimes it's normal everytime I pull the trigger it acts differently, if tried to plug my servo into the throttle slot on the receiver and pull the trigger and servo moves fine,so I'm becoming frustrated and bad receiver is the only thing I can come up with so I think I'm going to buy a flysky just wondering if someone can agree or disagree

 

[waw]

Sometimes I don't get throttle at all sometimes just a little sometimes it's normal everytime I pull the trigger it acts differently, if tried to plug my servo into the throttle slot on the receiver and pull the trigger and servo moves fine,so I'm becoming frustrated and bad receiver is the only thing I can come up with so I think I'm going to buy a flysky just wondering if someone can agree or disagree

did you run on lipo or else?
check the voltage if you're on LiPo batteries, if it's low in voltage then the low voltage cut off for lipo doing its work well.. charge it

if that doesn't solve the problem then go ahead replace your receiver
CMIIW AFAIK

 

[crawlhog]

check the motor, if its old and stock with alot of time on it most likley the problem.

 

[DTA510]

Receiver fried,got a gt3 on the way

 

[seal20]

Hmmm, ANOTHER fried receiver!!! Which model receiver do you have?