SCX10 Drive shafts?

[Milby76]

I got the chassis parts upgraded to eliminate the flex on my Trailwalker, Im now setting my game plan to upgrade some of the parts on the suspension and drive train. Maybe Im overthinking it but it seems like the stock drive shafts have a little too much play in so Im thinking about upgrading them.

Does anyone know if the aftermarket drive shafts for SCX10 will work on the Enduro? I know that MIP has shafts for it but Im trying not to spend $72 on a set.

 

[durok]

I've been thrashing my Enduro on 3S for quite a while, with nothing more than an upgraded servo and steel beadlocks and different tires (roughly the same size as the Sendero stock tires - no issues with the driveshafts to report...

But:

Basically if you get the measurements right, Axial upgrade parts would likely bolt right up.

However, Samix has a couple parts that might be of interest:

https://www.amainhobbies.com/samix-element-enduro-aluminum-inner-outer-driveshaft-set-black-samend-6244-bk/p995590

https://www.amainhobbies.com/samix-element-enduro-aluminum-driveshaft-cups-black-4-samend-6043-bk/p1060713

Looks like doing the front and rear driveshafts with their aluminum upgrades runs a total of $52...;-)

 

[Milby76]

Thanks Durok, your post gives me some confidence in the stock shafts, I may as well wait and see if they break or have any issues and take it from there. I was looking at these though, they look very nice. https://www.amainhobbies.com/incisi...6Xm2Q9EB-K-tm4tr7Bu35yb4gCDSUolVijUQsnV7njTtE