• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

Sessions YTC Dlux berg build

Re: The U help me pick build thread

more_session_please said:
Ok thanks.

I think I have made my first decision for the rig. I would like to get on your list for a set of narrowed Voodoos and the special foams to fit them. I will need your suggestions for what color the tires and foam setup as I have no clue and you already know the type of rock I will be dealing with. The only thing I know is I do not want them too soft. I was watching the videos in Laalaa's thread and he was doing amazing things without a lot of squish in his tires. Maybe a middle of the road setup to start until I learn what I like and don't like.

I also wanted to ask which wheel width I should start with for those tires. Tomi offers 22 and 26mm. I am assuming you take paypal? Let me know what I need to do to get on the list.
Click to expand...

Shoot me a PM with questions and I will do my best to answer all of them for you "thumbsup"
 
more_session_please said:
I took this screen shot from Harley's 2013 Nat's video. I know this chassis is a T1E but what is it called and where would I find one? I cannot find much of anything on them. Are they still making/selling stuff?


Click to expand...


T1e is owned by Rockpayne now and last I talked to him he was having some issues with the machine to make parts...


Sent from my iPhone using Tapatalk
 
Thanks Tom,

So it is not T1E. Not quite the same in Orange and without body panels. I guess I like the lower slung fastback look over the tall boxy look.

I just cannot decide what to go with. Of course I want whatever I get to perform great but I also want it to look good as well. The things that appeal to me seem to be the hardest to get.

My choices are below unless I missed something.

NCD sudu

RCbros

YTC Double

Dlux

Classi, Either one

Classi and Dlux both offer links for their chassis but for the other ones I would have to figure it out.

EverettY said:
T1e is owned by Rockpayne now and last I talked to him he was having some issues with the machine to make parts...
Sent from my iPhone using Tapatalk
Click to expand...

I guess it was not T1E but a guy named Turbofest's chassis. I am not sure why it says T1E on the side but maybe there is some kind of connection.

Ok it is time to start making decisions and get ordering:)

I am going to get Dlux knuckles for sure but I need help to choose how to order them. I was thinking maybe Delrin or AL on top and brass on the bottom with slug holes plus lower brass half circle weights. I think that combo would give the most adjustability. Empty with no slugs would be fairly light and then I could add brass or tungsten slugs to first the lower half then the upper half and then lower brass rings. It would also keep the weight down low8) Opinions needed:)

I also need to figure out what CVD's I will be using. I want the 70 degree steering if possible and want strength and durability are important as well. Are the OFNA ones the kind that use the pinned on hubs? Can I use that kind ? If not what kind of steering angle/strength would I get from the XR/Wraith stub choice? I am planning on using RCbros tubes and I am not sure what Dlux stuff will play nice with RCbro stuff.

Help Pleeeeease:ror:
 
Last edited by a moderator:
Spend some time talking with Dlux he will make sure you're taken care of. I use the Dlux shafts with the RcBro tubes. I did have to grind down the shafts a little to fit in the tube.
 
Re: The U help me pick build thread

Beerman Crawler said:
Spend some time talking with Dlux he will make sure you're taken care of. I use the Dlux shafts with the RcBro tubes. I did have to grind down the shafts a little to fit in the tube.
Click to expand...

So you have his AL rear tubes with his Delrin hubs in back? What are you running for CVD's/hubs up front? You may have told me on Sunday but we were covering a lot of topics in a short time:)
 
Re: The U help me pick build thread

more_session_please said:
So you have his AL rear tubes with his Delrin hubs in back? What are you running for CVD's/hubs up front? You may have told me on Sunday but we were covering a lot of topics in a short time:)
Click to expand...

I only use the Dlux shaft in the front and creeper bob ti shaft in the rear. Up front im using Vp hubs but most guys use the shift hubs and if i was buying new i would get the shift hubs. Up front i use the axail stub but Dlux is a big fan of bully stubs because they are stonger and beefer. With a u-joint front shaft you go get a lot more steering but they are not as smooth roating as a CVD. Tom uses a CVD on his Xr and a u-joint on his sportman. Tom has never lost because his CVD didnt turn enough.
 
Re: The U help me pick build thread

So I spent all week reading, PMing and learning to figure out what to do. This is a tough hobby to get started or restarted in. I finally settled on a chassis. I ordered a YTC Double Agent. I like the low slug look, its proven and I can get my hands on one quickly. It also helps me spread the love with vendors and will keep my final build parts list unique. When I build or upgrade a mountain bike I don't buy a complete bike or use complete groups of parts I use many companies products and it turns out pretty cool.

Now I need to get all of the other parts going. I wanted to use RCbros tubes but they present some challenges. I am going to use Erik's front universals and I am debating on the rears as well but that means modifying both front and rear tubes as well as the non 8 degree chubs so they will play together. It also leaves me in a case crunch. I am staying away from Classi which leaves me with the plastic M/Ts or stock berg cases and while either would work they are not what I was hoping for. The only other way is to just go with Erik's complete axles which would be much easier but would leave a few vendors I was going to use out of the mix.

Thoughts anyone......
 
Re: The U help me pick build thread

My OPINION is if your using rc bros tubes they look great polished up with stock shaved cases.My axles are dlux,classic cut customs and rc bros using non 8 with the option of 8 and I couldnt be happier good luck with your decisions
 
Re: The U help me pick build thread

Ok everyone the ordering has begun!

After much deliberation I decided to get everything chassis down from Mr Dlux. It was going to take to long and going to be to difficult doing things any other way. This choice will have me driving by the end of April instead of June:)

I ordered,

His complete bad boy axles with Ofna stubs, RCbro gears and SDS 2nd and 3rd's as well as brass inserts for the hubs.

His V2 knuckles solid brass with slug holes and 16mm bearings along with a couple of thick and thin brass rings.

Lathed and modded Big Bores with springs.

A complete set of links with sliders for the D/A.

The D/A chassis is coming with the AL braces and their fancy skid as well.

I am still working on motors and electronics.
 
Last edited:
Re: The U help me pick build thread

Beerman Crawler said:
You're going to be very happy with what you got. Look forward to seeing you out on the rocks.
Click to expand...

Thanks Jaybe, Looking forward to being there. Once all this stuff gets here will you and Tom give me a hand in exchange for a healthy amount of Cerveza?



Slight update. My credit card is getting warmer by the minute!

2 13t 500 Pullers and a BR mini dual from HH are ordered.

CCbec and castle link on the way from Amazon.

Now I need a set of tires to use until EY can get me some narrowed Voodoos. He says June:cry: I am going to order these (see pic below) from Tomi when he gets back to use with the Voodoos but TCS has a good deal on Rovers and some SLW's that might make a good alternate set. Thoughts anyone?

[URL=http://s761.photobucket.com/user/Metalazep/media/ScreenShot2014-03-22at22316PM_zps944d62cd.png.html][/URL]
 
Re: The U help me pick build thread

Why narrow the tire at all? Guys round here are using full width voodoos with alot of sucess. Silver compound. All around.
 
Re: The U help me pick build thread

Curcal said:
Why narrow the tire at all? Guys round here are using full width voodoos with alot of sucess. Silver compound. All around.
Click to expand...

Cause thats what all the cool kids do.......right???

crawl-o-matic said:
Just buy some Voodoo's and cut-n-shut them yourself. Order them today and you'll have them in a few days...instead of a few months"thumbsup"
Click to expand...

I have been thinking about doing that not the cutting but buying a uncut set direct. I hope your tires come with a bag of chips......
 
Last edited:
Re: The U help me pick build thread

crawl-o-matic said:
Chips? No. But they have been known to come with state, national, and international trophies8)
Click to expand...

I was poking fun because with all the buzz about them that they definitely should "be all that and a bag O chips":ror:

And yea know, for $80.00 a set would it kill you to throw in a bag of chips? I like chips:)
 
You must log in or register to reply here.

Similar threads

V
EnRoute Berg "Snow Tracer v3" build
Replies
1
Views
793
JatoTheRipper
JatoTheRipper
Speedy-Triple
Speedy's Utron-Runner Project!!!
Replies
17
Views
4K
Speedy-Triple
Speedy-Triple
C
RC4WD Beast Build
Replies
8
Views
3K
The Dark Knight
T
L
Deadbolt f350 AKA the spongebob truck
Replies
4
Views
3K
boldfin
B
A
Zulu Romeo 2 IFS Element Enduro Kit Build
Replies
18
Views
5K
AKayl
A
Back
Top