hairba11
RCC Addict
ok nacho, where were you in those pics. That looks like some nice territory. Is that the place you were talking about at 141 and 44 on the south service road?
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
st. louis chit chat
- Thread starter hairba11
- Start date
sniper
RCC Addict
I also want to know???
That is ALLLLLL the way up here in north county...if your google mapping it...it is basically at hwy 367 and Lindbergh..when you see lindbergh..scan south a hair and you will see a creek that crosses 367..the creek makes a sharp turn north..thats the spot...on the south side
Google shows a street called Lusher there...it isnt there anymore but there is a small gravel drive right off 367 thats where ya park
heres a slightly larger view of that area...
Google shows a street called Lusher there...it isnt there anymore but there is a small gravel drive right off 367 thats where ya park
heres a slightly larger view of that area...
max power
Rock Stacker
Kick ass looking spot"thumbsup"
Since this is a chit chat... I was going to go look at a house today but :x So I went to Busch Wildlife today , on the backside of lake 35. You can see it from 40:shock:
I was very impressed, I think it would please the fellers with supers;-)
Some pictures
Since this is a chit chat... I was going to go look at a house today but :x So I went to Busch Wildlife today , on the backside of lake 35. You can see it from 40:shock:
I was very impressed, I think it would please the fellers with supers;-)
Some pictures
Attachments
Last edited:
max power
Rock Stacker
max power
Rock Stacker
And I made this crappy short video, complete with some techno rock:lol:
http://youtube.com/watch?v=1dqBU4Bo-WE
http://youtube.com/watch?v=1dqBU4Bo-WE
hairba11
RCC Addict
That does look good. I just made a bunch of deals on thursday night, I'll soon have a tuber I am going to buid a camera mount onto so I can have a camera truck. I think the third channel will be a servo above the camera hitting the shutter button. by then the new compy shoulf be up and running and i might be able to finish editing the vids from the last weekender.
keep spots in mind, we need to fill out the official GTG locations
keep spots in mind, we need to fill out the official GTG locations
Mav-1981
Quarry Creeper
OK I am trying to boycott this forum, but when i see pics like that I CANT cause I have no way of talking to anyone besides Nacho and Jeff. Nice to see we got 2 new spots, BUT BOTH my 2.2 Crawlers are down and I need to switch the motor wiring around on the Super. Jeep is just under construction for the scale project and the AX10 compy is all tore up, but parts will be here monday. If anyone is planning on playing tomorrow, POST so I know, I can get the super and jeep running, and maybe some loctite will hold the shock together on the comp.
hairba11
RCC Addict
boycott because it takes up too much time?
or my problem, that it costs too much to read through it and get Ideas and execute the ideas....
I was talking about official first sundays, not tomorrow.
tomorrow is supposed to be clear and 47* I'm iffy on it.
On the other hand I did finally fix the rear axle on the willys, there was porosity in the casting for the pinion, and one of the teeth broke off and started chewing up the ring. There was one set or R&P at checkered I was able to pic up on friday and got the thing running.
or my problem, that it costs too much to read through it and get Ideas and execute the ideas....
I was talking about official first sundays, not tomorrow.
tomorrow is supposed to be clear and 47* I'm iffy on it.
On the other hand I did finally fix the rear axle on the willys, there was porosity in the casting for the pinion, and one of the teeth broke off and started chewing up the ring. There was one set or R&P at checkered I was able to pic up on friday and got the thing running.
JEFF THE JET
Quarry Creeper
sweet good find
I just got done with my wifes pimp cane .Itl be a good testing ground"thumbsup"
I just got done with my wifes pimp cane .Itl be a good testing ground"thumbsup"
Mav-1981
Quarry Creeper
No its actually bad reasons, but not going to get into it here.
My weather says 51 and usually its 5 - 10 deg off,lol. They say its supposed to be 55 and it hits 70, so I never listen. I know monday and thursday are supposed to be nice, so probably going to venture out if I can find either of these places.
Max..thats freakin hilarious...My buddys and I were at that spot at Busch yesterday also!!!!!! I was tellin Mav about it! We were there around 5:30pm.
Its not going to warm up much today,but i think i might hit the spot by my house..1pmish? If you want to meet up let me know and i can get ya to it "thumbsup"
Its not going to warm up much today,but i think i might hit the spot by my house..1pmish? If you want to meet up let me know and i can get ya to it "thumbsup"
max power
Rock Stacker
And I left about 4:00-4:30:lol: missed you by an hour.
hairba11
RCC Addict
which spot is near your house? I may be working on the stuff we bought yesterday, but I might be able to make a lunch break happen
max power
Rock Stacker
I'm going to try to make it out there, so expect to see me today"thumbsup"
hairba11
RCC Addict
one of the auction goods we picked up yesterday was an 18 ft flatbed trailer.
I'm woring on wiring and lights and light cages and safety chains today. Don't think I'll have time to make it that far north. at least not today.
I'm woring on wiring and lights and light cages and safety chains today. Don't think I'll have time to make it that far north. at least not today.
hairba11
RCC Addict
Woo Hoo!!!
I survived my Dumb Azz Move Of The Day
The radio still works. I haven't checked range yet, but all the functions are there.
I survived my Dumb Azz Move Of The Day
The radio still works. I haven't checked range yet, but all the functions are there.
Mav-1981
Quarry Creeper
Man I was so siked for today, thought all my parts for both 2.2s would be here. Th compy is ready minus the new body. All the rest is coming from RPP which they use UPS Ground (booooo!) so I wont have the tires for the Jeep or the new body till thursday. I may make it sunday, not sure yet though, but I dont think I will have the jeep since I have my son this weekend, wont have time to work on it. I didnt realize scale projects took so much work,lol.
Similar threads
