Swb link set?

[lilws6]

Did a quick search with nothing I was looking for. Does anyone make a swb link set yet for these trucks. I'm looking at dropping down one of my trucks to the 11.4 for a blazer body I want to build. If not I could build my own I suppose.


Sent from my iPhone using Tapatalk

 

[monster 550]

I looked too and think you can use an extra set of front links for the rear to get pretty close. I thought about it for the same reason and with the rc4wd blazer body sitting on top of the kit it's way off. Although the front is 3 linked you can buy the links in pairs.

 

[lilws6]

I thought the rc4wd blazer was setup for the 12.3 wheelbase of the tf2


Sent from my iPhone using Tapatalk

 

[monster 550]

11.3 for the rc4wd blazer. I have a vaterra blazer coming that is 12.3. I used 12.3 WB vanquish links reconfigured on my rc4wd blazer mud truck with ar60's to achieve the right WB.

 

[monster 550]

What WB tf2 do you have? The new 4 door lwb, swb, or regular Mohave? The Mohave 2 is also 11.3". What blazer body are you looking at in an 11.4" WB if not the rc4wd?
Here's a pic of the rc4wd blazer sitting on a stock scx10 II kit. 11.4 would be close enough, but 12.3 is too big.

[/URL][/IMG]

 

[lilws6]

I've got the regular tf2 Mohave2. The proline blazer is the one I had on my last scx. 11.3 wheelbase fit good.

Sent from my iPhone using Tapatalk

 

[monster 550]

Your tf2 should have the same 11.3 WB as the blazer that was made for it. I also had a proline blazer on an old scx10, but had to make links for that one. It was a little smaller at 11.2" WB. Is the proline the one you're planning on using? Have you looked into a vaterra blazer body? You can keep the longer WB and it has a 3d grill.
Here was my old proline blazer, I didn't like the WB so short on that one, I never got it dialed in.

[/URL][/IMG]

 

[lilws6]

I loved the shorter wheel base on the old truck. Since I have two of the kits. I'm going to keep one long and one short. Right now I'm using the included jeep body on the one I just built. Which I'll keep 12.3


Sent from my iPhone using Tapatalk

 

[monster 550]

Well good luck with it. The new axles should make pinion angles much better on a swb. Check into putting front (4) links on the rear and see where that gets you. Start a thread when you get it going.

 

[lilws6]

Definitely


Sent from my iPhone using Tapatalk