Szczerba's SCX-EXO

[509hooligan]

With the 35T brushed motor, 22 tooth pinion a 40c 2200mah 3s lipo lasted about 150 of 170 gates.
Value Hobby R/C Hobby Store (Addison, Illinois): GForce Elite Series 40C 2200mAh 3S 11.1V LiPO

Battery size is not a huge deal for G6's as you can change batteries on course.

Kinda depends on how you drive your rig and what motor/gearing you have.

Thanks! I just like a lot of wheel speed and all I have ran in a crawler so far is a 2 cell... I am just wondering with a tekin fxr and 35t pro hw is a 3cell will have a lot of when speed?

 

[Szczerba]

Lol well I'm not big on copying people.... But I love this rig and started my own. I plan to do some tweaks to set it slightly apart. Thanks for the inspiration!

I copy bits and pieces of rigs from folks all the time. Lots of great ideas to build from on RCC. Post up a build thread or some pictures in this thread.

Thanks! I just like a lot of wheel speed and all I have ran in a crawler so far is a 2 cell... I am just wondering with a tekin fxr and 35t pro hw is a 3cell will have a lot of when speed?

With that setup you will have to run a 22tooth pinion or bigger with the 87t spur to get the wheel speed. It would be better to jump up to a 27t or 21 turn brushed motor. Or a Tekin 13.5 brushless or a Holmes Hobbies 13.5 brushless when they are available.

 

[xigtc]

Didn't take any during building so ill just toss it in.

 

[Szczerba]

Looks great.
Pretty easy make one up, huh? I like the look of the GMade shocks.
My rig works great on the rocks or the trail.


Sent from my thumbs.

 

[xigtc]

Looks great.
Pretty easy make one up, huh? I like the look of the GMade shocks.
My rig works great on the rocks or the trail.


Sent from my thumbs.

Thanks! I like 'em but they're a tad big for scale appearance... But they're supper smooth and easy to tune. Good to hear. Saw your pic of the Pitbull tires, are they holding up to all the hype?

 

[Szczerba]

Thanks! I like 'em but they're a tad big for scale appearance... But they're supper smooth and easy to tune. Good to hear. Saw your pic of the Pitbull tires, are they holding up to all the hype?

Yes the Growlers are working great still with the Crawler Innovations foams. Ran this rig at a G6 type scale run last weekend in East Texas and it did great.

 

[Szczerba]

I really like the 1.55 PitBull Growlers but I have had the 1.9 setup on the bench for a while. Finally decided to mount them up today.

Crawler Innovations Single Stage Closed cells for the 1.9 PitBull RockBeasts
Axial 1.9 wheels modded for SLW hubs and some rings I had in the wheel pile.
Out of SLW 225 hubs but you get the idea.

JConcepts hubs mocked up. Fit SLW bolt pattern.

Sent from my thumbs.

 

[Szczerba]

More dress up.

1.9 MTZ's with 4.5" CrawlerInnovations double deuce foams. Medium outers all around.
I really like the way these tires perform. One of my favorite 1.9 tires.

Sent from my thumbs.

 

[cox308]

This is a great thread and an awesome build!

It gets 5 stars from me!

IDK how it didn't have 5 stars already??

edit: Only thing I can see wrong with the build is the "cock & ballz" stenciled in the front right wheelwell...WTF!

 

[Szczerba]

This is a great thread and an awesome build!

It gets 5 stars from me!

IDK how it didn't have 5 stars already??

Thanks. I dunno but this is my "go to" scale rig now. Handles great with the rear 4-link adjustments and looks decent. And nice that it's 6.5lbs rtr with 1.55's.

Havent ran the 1.9 pitbulls yet cause i am
Too lazy to swap some 225 hubs onto them the wheels. Il just buy some more hubs soon.

That's a BC Paints logo. Lol

Sent from my thumbs.

 

[Szczerba]

Highlift Jack installed

More wheel/tire swaps
1.9MTZs with CrawlerInnovation foams, SLW modded Axial 1.9s and metal rings

Sent from my thumbs.

 

[metalry101]

Love this build! I'm sure it's in the thread somewhere, but I must have missed it, what is the wheelbase?

 

[Szczerba]

Love this build! I'm sure it's in the thread somewhere, but I must have missed it, what is the wheelbase?

Thanks. Packed up and heading to Prescott, AZ for the weekend.

Second sentence, first post. :ror: 12" Wheelbase

 

[metalry101]

Second sentence, first post. :ror: 12" Wheelbase

:lmao: Damn, not sure how I missed that. Thanks for the info.

 

[Szczerba]

:lmao: Damn, not sure how I missed that. Thanks for the info.

No problem. I always post a ton of pictures in my builds so the pages add up quickly sometimes.

I really like he way this rig handles and it's. bonus that its 6.5lbs RTR.

 

[kakachille]

rigs awesome nice work

 

[Szczerba]

rigs awesome nice work

Thanks.
Did some wheeling at Watson Lake, AZ this weekend at Nats.

Sent from my thumbs.

 

[metalry101]

I couldn't resist building one of these either...

 

[Szczerba]

Awesome. Looks like you have some work to do!

 

[Szczerba]

Stage 1 complete of the Swine Swagger Recon G6. Thanks to the Recon Crew!

Have to skip stage two but this SCX-EXO just flat works. All progress no penalties.

Sent from my thumbs.