Tamiya CR-01 Picture Archive - No talking

[dezmoon]

 

[CrawlerGraphics]

My CR-01 chassis'd H2:
Novak Rooster Crawler esc
Integy 35T lathe
Pro-line 8 shooter wheels with Hammers

 

[tomancik]

no beauty, i know. However i love the rig.

Novak Roostercrawler-Combo
Hitec steering-servo
Axial Rock Lizard Tires/ Super Softs
Black Aluminum 2.2 Wheels w/Silver Rings (give the car a bit of wider offset)

 

[Frost]

Here's mine...

Mamba Max + CrawlMaster + 16T
Kyosho Shocks
Proline Hammer M3 + RockStar Beadlocks

 

[green73]

And mine:http://i216.photobucket.com/albums/cc271/green73_bucket/Picture011.jpg

 

[flmudder]

okay heres mine no torsion bar in front one in back front shocks relocated 645mg 45t proline rims cut down 1/4 inch cut up rock crushers spektrum dx3 lrp water proof esc and 3000ma stick

"thumbsu

p"​

 

[ruffryder]

Built as stock with Rooster crawler combo and MG 995 servo

 

[schmenzer]

The CR-01 is my second crawler after an RTR Scorpion. I really like the Land Cruiser and it has surprised me with how well it works. Nice kit too!

Novak Goat Crawler ESC
Integy 55t (going brushless soon!)
3.5 ounces of adhesive wheel weights in the front wheels.
JR Radio
Hitec 645MG
6-cell GP 3300s from my Touring Car days give WAY more than an hour of run time.

 

[njrockcrawler]

my cr01 at the jersey shore

novak goat
integy 35t
jr radio
jr hi-torq servo
ram light kit(s)

 

[stinkbomb]

got mine together yesterday, had to borrow an esc off a buddy...my 10 year old rooster finally pooped out on me... only shot one coat of paint on it, i was anxious to wheel it haha so i just slapped it on n took her out for a beating, worked flawlessly...awesome kit, which is what i expected from Tamiya

shot of the goods

a shot with it in front of her big sister... 4-1/4" vs 35" haha

 

[Ryanbored]

My CR-01:

 

[Gozer]

Here is my finished CR-01. Thanks Goz.

 

[matador]

Hi, from Chile, my RC01 "matador".

ESC Novak Rooster, Novak 55T, Spektrum DRX 3.0, Home made Winche with servo Hitec S311.

regards.

 

[mandis]

here's mine
3PM 2.4ghz
50T motor
futaba 9402 servo
mtronic esc no motor limit
hextronic BEC

 

[cyberdog]

And heres mine. Just built and just had a testrun. No paint on it as of yet

CC Sidewinder
CC BEC
Novak 55T
Spektrum dx3
MG995 servos ( 4WS)
PunkRC Steering computer
3700Mah Nimh and 2x1700mah 2S Lipo

Cables are a mess but havent had time to secure them. Will put ESC, BEC and RX in plasticbox for waterproofing and waterproof servos.

 

[NaZ-T]

Here are some pics of DeanO's rig (silver) and My rig (green)

Both our rigs run the shocks upright next to the springs (no levers) DeanO runs stock shocks while I run the Pro-line dampers (the ones they used to make for the T-maxx awhile back) we both have FlatIrons mounted on Pro-line beadlocks, and all the lights work on mine. Thats it for mods

These thing are a blast to drive!!!

 

[MonsterDDT]

Still have new car scent

ESC: Moped V16R
Motor: 55T Integy Matrix Pro
Radio: Traxxas TQ3
Servio: MG995, 4WS with servo reverser
Front wheels: 8oz weight added on each
Rear wheels: 4oz weight added on each

 

[dezmoon]

my new 12.5 inch wheelbase fj,,,

heres both of mine in stock and stetched form

 

[avengernut]

Here's mine.All stock for now.Gs racing 3 channel radio,xl1 esc,3000 battery an alot of time in those decals

 

[1rcmonster]

Heres mine...

DX6i...Novak XRS...working lites...Associated shocks, sway bars still used....scale stuff made by me