Tamiya CR-01 Picture Archive - No talking

[Gordkoff]

Add'd some ST Racing Concepts " Bling "

 

[FreshMeat]

Work in progress

Well here it is - I think that I am going to end up spending a lot of time (and money) upgrading this rig (don't tell my wife) :ror:

Futaba 3PM 2.4 Ghz
ESC: Mtroniks Viper Marine 20

It is 2WS for now but I will be converting it to 4WS soon

Everything else is stock for now....

It isn't as dark as it shows in this picture - although it went a little darker then I planned.

 

[Vtown Crawl]

Specs:

CR-01
Novak Goat SC
Brushless Motor 18.5
Losi Shocks
Proline Hammers tires and Memory Foam
4WS - JR servos
DX3R Spektrum

 

[KwS]

Heres my new CR01. Purchased the Land Cruiser at a rather cheap price.

The body is still away getting painted, should have that back next week and then ill fit the LED light kit to it.

So far, i have done away with the cantilevers (were limiting my articulation too much and didnt like the slack in them). Still running factory shocks and springs for now.

Running a crappy futuba servo, which is WAAAY to weak for this purpose, so i have a traxxas waterproof high torque on its way.

My CR01 still in completely stock form, with cantilevers, posing after it drove over my old TT01.


The old articulation limit... just starting to lift off rear tire.


And the new one... (all tires still touching)



And the new issue, which will lead to me getting coilovers...

 

[4 RUNN 1]

Jk cr-01

Here's mine with a new bright body and KHAN chassis​

 

[Davidevo50]

Hey guys what do you think of my recycled cheminy foundation?

from this

To that!!!

Sorry for the picture quality, my wife took the camera with her!:lol:

 

[NielsVV]

* Novak Goat with 55t

 

[SNPY]

CR-01 from down under!

JunFac goodies .. HPI 45T .. Sidewinder .. Rock Claws .. Pro-line F100 body.

 

[lewy]

My CR-01

Tamiya ESC
Standard motor

 

[Staabi]

http://i83.servimg.com/u/f83/12/83/92/14/dsc00927.jpg

Installed several Hop-Ups from Proline and other scale parts, made a rudimentary cockpit, Driver was named "Legolas" before .

Greetings,

Michael

 

[IRON MAN]

Cr01 fj

I know many people have issues with 3Racing, but it is easy for me to get these parts over other manufacturers. I've am waiting for 1.9 Pyhtons and Rock Crushers from RC4WD... Hope you like. This truck is probably my most favorite rig just because of all the time I spent wrenching on it. But don't get me wrong, my AX10 Alpha Male is still the Alpha Male in the collection.

3Racing parts (aluminums, leds, winch, li-po) out the wazoo, Tekin FX-R & 55T combo, Spektrum SR3001 rx, Integy F-350 wheels, Tamiya Rock Cruiser tires, HiTec 645MG servo, and Nikko FJ Cruiser body with added lightbar off another Nikko body.

 

[Jeephead]

First Day out

Well this was our first day out on the rocks. Finally enough snow melted. She got a bit scuffed up but who cares, we had a blast!

 

[CJ318]

Hi, first post

This is my first R/C since I was a youngin' and I've never been into trucks, just those cheap german boxes ;-) This isht is a blast though!

Mine is box stock, save for the Tamiya alum servo mount up front. Has a 2400 something-something battery, HiTec Aggressor radio, Traxxas waterproof hi-torque servo and a Novak Goat. Also made a water resistant craft case to hold the electronics.

 

[HighCurrent]

My first Crawler.....

Freshly Stock just 1 test run....
Spectrum 3000
tamiya 101 bk
cheap futaba servo

 

[carlos46]

 

[Lou Barzie]

Chevy CR-01

Hello i'm from belgium and this is my tamiya crawler i first wanted to make a scale monstertruck of it but crawling is much more fun The servo is a Hitec HS-5955TG so thats OK but the speed control and motor are dynamite tazer 12T and the stock motor. Cam somebody tell me whats the best to install for better power (novak goat ? integy55t with the dynamite speedcontrol , novak rooster?) every comment is welcome thx

 

[Grumpy]

Grumpy's wrangler

Just finished. Going on the "bay"

 

[loanpro]

 

[rccrawlking]

heres mine i need to get a new body without cut up fenders...

and the scale goodies

 

[akapmar]

Hi Guys!Newbie here from Doha, Qatar

I would like to share my ride...