Tekin rs gen2 drag brake in reverse only HELP

[Blinkfan5150]

Set up brushed HH MOTOR and wired regular red and black to A and C on esc. Car works great in all modes only problem is no drag brake on level 2 or 6 of drag brake levels. Feels like I have super drag brake when going reverse and stopping. Can someone please chime in and help????

 

[WHITE-TRASH]

Reverse channel 2 on your radio and reverse the wires on your motor.

 

[Blinkfan5150]

Reverse channel 2 on your radio and reverse the wires on your motor.

Ok
For Tekin Rs gen 2 it's ok to run opposite polarity to fix motor direction?

 

[WHITE-TRASH]

Yes it's ok for every esc. The speed control doesn't care what direction the motor is spinning.

 

[Blinkfan5150]

Yes it's ok for every esc. The speed control doesn't care what direction the motor is spinning.

Yes thank you White Trash. Reversed polarity and swithched remote channel reversed and tinkered with it a little since it didn't help.
I talked to John at Holmes Hobbies and adjusted neutral settings as well but didn't work.
FOUND the problem
Tekin rs gen2 Led 2 adjustments are opposite from Brushless to Brushed
usually the higher the LED the MORE brake, drag brake, motor limit, ect.
But on Brushed Motors its opposite on LED 2 setting. One light means more drag brake and all 6 lite up mean less drag brake.
Thanks Tekin for making this opposite.
Hope this helps someone