TF2 driveshaft length

[Lentsnh2012]

Hey guys, I've searched but haven't been able to find what I need to know. I'm looking at Punisher shafts for my TF2 but I don't know the correct length to get. Help!

Thanks!

 

[Joe$]

Look up the tf2 kit on rc4wd.com. Almost at the bottom of the page is a list of upgrades with links and part #'s
There is a link there for the correct punisher shafts there.
I believe that the tf2 uses the same length shafts as scx10.

GL

 

[blumaro]

Look up the tf2 kit on rc4wd.com. Almost at the bottom of the page is a list of upgrades with links and part #'s
There is a link there for the correct punisher shafts there.
I believe that the tf2 uses the same length shafts as scx10.

GL

x2 same as scx10 130=135 mm

 

[lunatick]

Yep same size as the SCX Dingo
Honcho , wrangler and AX 10 are a tad big

 

[xBLAKEx]

Good to know, the stock shocks are garbage on the TF2. Don't get why they had to cut corners.

 

[Poserx]

My TF2 came with three drive shafts, one short and two long.

1) is that normal?

2) I used the short for the front and the long for the rear giving me a spare long. Is that correct?

B.

 

[blumaro]

I used the scale punishers 100=135 mm, fit perfect

 

[xBLAKEx]

I used both of the long ones. But I'll be upgrading soon.

 

[Joe$]

I used both of the long ones. But I'll be upgrading soon.

me too

 

[motakitty]

I have a set of junfac ones they are 95mm-130mm would these work