tklatti
Rock Crawler
Those of you that have them. What if any issues have you had? What would you change first,I mean what area would you upgrade to make it better? Thanks for your replies in advance.
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Thinking of getting a traxxas summit
- Thread starter tklatti
- Start date
heminutt
Quarry Creeper
mine is stock and i have only broke a rear axle
tklatti
Rock Crawler
what part did ya brake? what was ya doing wen it broke?
The only things i ever broke in mine were a couple front driveshafts and a front shock pushrod. And those were all from me being rough on it since i dont think traxxas intended 15-20 foot rock jumps off the side of a wash into the rocks at the bottom.
BansheeManiac
Quarry Creeper
my friends got one he might sell it hasnt been drove much at all
its pretty awesome i like it alot
only upgrade i think i would do provided i had the money would be to do a different motor esc combo so you can use just one battery at a time to get longer run time. but you really dont need to tho i performs quite well and the selectable diff lock is right on.
its pretty awesome i like it alot
only upgrade i think i would do provided i had the money would be to do a different motor esc combo so you can use just one battery at a time to get longer run time. but you really dont need to tho i performs quite well and the selectable diff lock is right on.
Last edited:
BJoe
I wanna be Dave
Yea, that's probably a wee bit more abuse than those parts were made for:mrgreen:
Actually, you can run the EVX2 on a single pack if you make a jumper to put on the non-BEC wire. Pretty easy to make too.
BansheeManiac
Quarry Creeper
Actually, you can run the EVX2 on a single pack if you make a jumper to put on the non-BEC wire. Pretty easy to make too.[/QUOTE]
can you post a pick of this..... thanks
can you post a pick of this..... thanks
can you post a pick of this..... thanks[/QUOTE]
All you do is take a TRX female connector and solder each end on a single piece of wire (jumping both contacts together). Think of it as removing the non-bec plug and connecting the red and black wires together. If you make a jumper plug, you can always unplug it and run 2 packs again.
BJoe
I wanna be Dave
All you do is take a TRX female connector and solder each end on a single piece of wire (jumping both contacts together). Think of it as removing the non-bec plug and connecting the red and black wires together. If you make a jumper plug, you can always unplug it and run 2 packs again.[/QUOTE]
Yea, it's been a while since I helped somebodu with one, I want to say it needs to be put on the plug that goes to the left side battery
