TLT Crawler Picture Archive

[Plays_with_Toys]

Ok here's the deal guys, if you would like to submit a picture of your truck you can do so here. There are some rules, so allow me to bold these so you read them :lol:

*Pictures must not be any larger than 640x480
*You may only submit ONE picture of your truck
*Your truck must be complete, no poser shots of your truck without driveshafts, or shocks, or the chassis sitting on a spray can
*You may link to a thread about your truck and you may link to a site containing more pictures
*Do NOT list out addresses to individual pictures
*If you would like to change your truck's picture, please edit your post accordingly
*Anyone not following these rules will have the rules enforced onto their post as the mods see fit, ie: removing excess pictures, deleting multiple links, deleting of the entire post if too many rules are being broken for us to simply edit the post

The main thing here is we want to show off your trucks, but we don't want people suffering with long load times to get the pics up. We also don't want rccrawler's bandwidth to go down the toilet. Not everyone is running monitors at 1600x1200, so small pictures are appreciated.

Thank you and post away!

 

[Plays_with_Toys]

Allow me to start:

This is my TLT-10 with my custom TSC-10 chassis. I will get a link to information on the truck itself later.


New comp. ready setup (yes, I drove up and over this obstacle):

 

[rckjeep]

Edited

Hey PWT's I've seen that pic like 3 times before in different threads. But its so awesome, I'm fine seeing it a fourth time! But you know it's missing something. Mmmm oh Rock RIngs Ya that's it!

Here's mine, and I don't know how to resize yet. Badger Help!

Though I don't own it anymore I'm leaving this picture up because I miss Ralph. Anyway one to the latest creation

Here's the latest

 

[Rikpal]

Pitbull

Here's Pitbull.

Modified Tonka Body, TLT axles, TXT tranny,
homemade frame, working lights (all) and winch,
homemade rollcage and bumper,
snow chains, snow plow.

Link to the site page will be added when the page will be updated

 

[AdamF]

I dont actually have it yet, but I sent my money out yesterday! Can't wait till she's here!

 

[52crawler]

hey im been cruzin round this forum for a while now and decide to register. here my tlt.

thats wat it look like in dec. now i got a stampede tranny with plexiglass chassis.

 

[sicj]

Project Immolator

 

[Nish]

TLT axles
TLT tranny w/4-tec diff
maxx shocks

http://img139.exs.cx/my.php?loc=img139&image=Picture26.jpg

 

[jwrape]

Here is my TLT with 1/6 scale GI Joe body and Emaxx 2 speed tranny

 

[ILoveRCRockCrawlin]

my tlt

heres mine

http://upload.thefordmccord.com/pics/100_0105.jpg

 

[JakeTheAlligatorMan]

Tlt-bulu 2

Here is my TLT-B2 "VADER", it has an 12.75" WB

A Link a Thread with more Pictures "Lord Vader"

 

[CustomCrawler]

Trail TLT
WB-12.5"
W-10.5"
H-9"
TS-4.75"

Custom:
Chassis
Tranny mounts
Links
Shortened maxx tranny
Servo mounts
Shock Mounts
Body mount

Locked Diffs
E Maxx tranny
Lathe motor
Maxx shocks
Maxx shafts
Mashers
Pro-line FJ40
HPI split 5's

 

[cman_1500w]

Here's my TLT - Project Bummer.

More info here:
http://www.rccrawler.com/forum/showthread.php?t=5420

 

[WRMorrison]

Here's my newly completed 2.2 TCS Extreme:

Truck base: TCS Extreme chassis, clod axles w/stock pinions
WB: 12.25"
Track width: 12.5" (outside to outside)
Weight: 5lbs. 14oz. (RTR w/batt. & body)
Clearance: 1 5/8" under axles, 5 3/16" under chassis
Overall height (with body on): 10.5"
Tires/Wheels: Imex All-T's, dyed HPI wheels #2135
Motors: 55T integy lathes
Batt.: 8 cell Kahn brick (2/3A - 1050mAh)
Elec.: HS-645MG's F&R, mod. TQ3 from http://www.thecrawlerstore.com , Novak EVX esc.

 

[thefordmccord]

Truck: Tamiya TLT-1
Wheel Base: 12.25"
Width: 11.5" (outside to outside)
Tranny: Stampede
Chassis: Modified TLT chassis
Shocks/Springs: Dynamite Shocks – Associated green rear truck springs – 80wt oil
Tires/Wheels: Pro-line Masher 2000/Ofna 2.2 wheels
Motor: 27T Integy modified to 0 degrees timing
Servo: Hitec HS-5645MG Digital

 

[TLT-10Crawler]

-TLT Axles-
-tamiya carbon fiber chassis
-locked center and rear diff
-custom 4 links and steering links
-traxxas sliders
-RPM typhoons 2.2
-2.2 swamp dawgs
-axle mounted shocks
-4 wheel steer
sorry for the crappy pic couldnt find my good camera

 

[Jam1sstang]

Newly built TLT Crawler (from Custom Crawlerz)

Here is a pic from yesterday of my TLT. It sticks to the rocks better than my TXT.

It's features are.

Stampede tranny, INTEGY Lathe motor, Masher 2000's on HPI superstar rims (w/o foams), Independant 4 wheel steering, MAXX shocks, CUSTOMCRAWLERZ TLT chassis,(to NEW to be in production yet) 13" WB, NOVAK Super Rooster, and a custom 4/5AA pack.

 

[azvader]

Buster

Custom TLT12L chassis carbon and Kydex
WB- 12 3/8" Track- 10"
Center clearance- 3 1/4"
Height- 5 1/2"
Weight- 5 lbs 2 oz
TLT axles w/alloy knuckles TCS clocked Cs frt RC4WD straight axle adapters rr
RC4WD spools, WK/AX10 clamping hexes, and full ball-bearings
Hitec 5998TG BTA Hitec 5645MG rear axle forced articulation and Hitec 85MG transfercase
Custom V.3GT2 transmission w/4.09 to 1.0 ratio inline transfercase w/4WD,FWD, and front dig
Mamba 25 w/TCS BM6 brushless and 1400mah 9.6v pack
Torsion bar frt and rr suspention
M2K M2s w/hacked foams w/Axial beadlocks rear
M2K M3s w/hacked foams w/narrowed Axial beadlocks frt with 2.5oz B.B. weights in each front
B3 type buggy body
DX6 tx/rx

Build Thread
http://www.rccrawler.com/forum/showthread.php?t=8374

 

[jwrape]

Here are my two latest rigs

 

[camel_rc]

Here's my TLT:

Homemade chassis, pede tranny, M2K's, Traxxas shocks, Cirrus servo, and Hummer body