TLT Crawler Picture Archive

[Jersdunz]

here is my new christmas pres to me....lol i couldn't have built it with out the information based off of these forums so to all who are on here thanks much...it has a pede tranny, integy lathe 55 turn, moabs, associated bead locks and my own dirty hand cut bulu look alike plates...

 

[Crawler downunder]

This is my TLT BRONCO, running stampede tranny, 2.2 Dawgs, locked all diffs, Traxxis links top and bottom,TNX Shocks.

 

[Clintster]

Here's mine and hodges996 crawlers

 

[dezfan]

The Shadow

Here is my latest addition to the stable.

 

[The turtle]

The new kuala. By the turtle!

[/INDENT][/INDENT]

 

[rockbender]

here's mine with a Koala Chassis by M&L.

 

[rockbender]

ok will do

 

[iwantoffroad]

My Competition Rig “Hayward” now water proofed

My Competition Rig “Hayward” now water proofed with pictures and new updates

sw2
pede tranny
pede shafts
55turn
axles shaved, locked, trimmed, greased and shimmed
rooster
tq3 with rear steer mod
hs 645 mg
the usual
lots of time put into it
waterproofed



extensive build up recap

the build up thread

http://www.rccrawler.com/forum/showthread.php?t=44693

 

[ROC LOBSTER]

Wow, I Need A Bigger Photo

 

[robbo989]

It needs a new tranny, chassis and I'm gonna extend it another inch and it should be good!

 

[LigouriRd.]

Here's my crawler, body's new but the chassis has been beaten up a bit...luckly its hard to tell.


Tracer Chassis
TEU-101BK w/stock tamiya can motor
Futaba S3010 servos front and rear
Traxxas extra long plastic shocks w/45wt oil
Hpi wheels w/moabs
Full ball bearings
Traxxas slipper pegged centre diff
Sort of posi front and rear diffs...the spider gears are shimmed with belville washers to provide differential resistance but still allow some differential action. The tension is enough to pull the truck up rocks without one wheel spinning however it still turns well on high traction surfaces like asphalt.

 

[Maciek]

Custom Jeep Wrangler 2.2

- Handmade chassis
- Integy 55T
- Pede tranny 83T/19T (tamiya module)
- Jeep Wrangler Rubicon body
- Tires -Yokohama Geolander
- ESC Tamiya TEU-101BK
- servo Acoms AS-16 :mrgreen:




Action Video (~48MB wmv)
http://www.upitus.com/download.php?file=32c9a755

 

[SWFLCrawler15]

sw2
645mg
integy 55t
e maxx shocks
all t's
narrowed stampede wheels
stampede tranny

 

[johnnearaugusta]

some pics of my P4

 

[LockedinLow]

Heres my Torsion Tlt

 

[redram360]

Finally got my Dodge done

I finally got this thing done, seems work takes up most of my time. Anyways, I cut the frame out of an aluminum bumper reinforcement from a car, reciever and controller from an old car I have. I also had some servos from my old tmaxx and the tires/wheels from a HPI nitro mt.

 

[John Deere]

Specson FLASH:
XRS ESC Pede shafts
Pede tranny ( locked )
Locked tlt axels
RPM wheels I found somewhere.
Masher tires. (will be masher 2ks soon) on some beadlocks
Deans plugs
Will have reciver pack soon
F-650 Body.

 

[RivBlueNoma]

*TLT axles locked with quick steele
*Home made chassis
*Home built servo/upper link mounts
*Maxx shocks
*Pede tranny locked with quick steele, metal top and center gears
*Driveshafts built with pede shafts and steel yokes at the axles. Plastic yokes at tranny as a
weak link
*Nitro Rustler wheels-single narrowed
*M2k tires, 3 oz weight in fronts, 2 oz in rears
*Home built links from 6-32 and sleeved with aluminum
*Parma 454ss body-slightly trimmed
*645mg servo
*Tazer ESC

Yesterday was my 1st time driving it, or any crawler for that matter. Took 6th place with her. "thumbsup"

 

[code3pse]

Here is my tlt crawler.

 

[andres-tavares]

stock tlt
mtroniks viper esc
traxxas tq3
integy 45t
locked central diff with silicon
locked front and rear diffs spider way

onto the pictures






click the pictures