tmaxx wheels for my new toy

[the kid]

im building a clod axled basher for fun and maybe a little crawling. i would like to run t maxx wheels. i have seen the 12mm to 14mm adapters and was thinking those would work. has anyone tryed to do this? well the prob im running in to is that i went to order rims and i noticed that different bard rims have different offsets in them. i dont have any of my parts so i cant just try it out first. i was just wondering if any one has done this. thanks

 

[M715ForLife]

and the problem with the stock wheels are?

 

[DaViolentOne]

I use RC Guy 12-14mm adapters on Maximizer offset rims... That works fine... One of the guys in our group has similar or the same adapters, I'm not 100% sure, with stock MAXX wheels with no issues... That help?

 

[the kid]

this is no problem with the stock rims expect for the fact that i dont have a set.i sold them a long time ago when i got out of the hobby. all i have is a set of axles. thanks for the help i was just going to buy a set of the plastic ones from the crawler store ( I THINK THATS WERE I SAY THEM) and give it a shot maximizer is that a brand . sorry for all the dumb questions but this is all new to me

 

[the kid]

i did a search and found the rims. the ones i say had a 3/4 offset i will have to measure the rpm one and see if they will work thanks for your help

 

[hdking46]

did the tmaxx wheels work i am thinking of using tmaxx or savage stock wheels on my clod?

 

[andrewmp6]

maximizer is a company that makes beadlock rims worse case is the tire will rub your lower link if they dont work sell them on here and get the widener ones