-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Today's flight vid
- Thread starter JasonInAugusta
- Start date
syco133
RCC Addict
Nice plane man wish i could do half that stuff.
That was the stupid press-on nose cone.
Recovered it.
Recovered it.
jeepguy
Quarry Creeper
nice//ever heard of a s.p.a.d. plane?
made from pepsi sighns.
i can make a whole plane(not including motor & radio) for under $5
& they can handle some impacts too.
pepsi sighn/teflon cutting board/ & pvc downsput or aluminum channel is all it takes.
i had a low wing 40" one with a .46 engine..
it was pretty fast..
do you ever do any inverted flat spins??
i love those..
i have a plastic plane that will loose only a little altitude in an inverted flatspin at full throttle..
i keep waiting for one to come apart on me..
made from pepsi sighns.
i can make a whole plane(not including motor & radio) for under $5
& they can handle some impacts too.
pepsi sighn/teflon cutting board/ & pvc downsput or aluminum channel is all it takes.
i had a low wing 40" one with a .46 engine..
it was pretty fast..
do you ever do any inverted flat spins??
i love those..
i have a plastic plane that will loose only a little altitude in an inverted flatspin at full throttle..
i keep waiting for one to come apart on me..
WRMorrison
Rock Crawler
Looks like fun. Once they get far enough away from me, I could never tell if they were going away or coming toward me :?
I probably wouldn't have the patience to learn anyway. I just got rid of the heli for that reason... :lol:
I probably wouldn't have the patience to learn anyway. I just got rid of the heli for that reason... :lol:
:lol:
A Typhoon 3D...just like it says in the vid.
http://parkzone.com/Products/Default.aspx?ProdID=PKZ4100
A Typhoon 3D...just like it says in the vid.
http://parkzone.com/Products/Default.aspx?ProdID=PKZ4100
kwj48
Pebble Pounder
Nice plane and vid. What kind of flight time do you get with a full charge?
aubie
Quarry Creeper
Pretty good Jason. Shift your CG a little more towards the rear and add about 35% exponential onyour radio and it should hover nicely. Dont forget the right aileron to counteract the motor torque. ;-) Is there any roll coupling in knife edge flight?
Last edited:
