-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Tommy's Class 1 Jeep
- Thread starter Tommy R
- Start date
Tommy R
I wanna be Dave
Got my lights from Al (Heyok) and I just finished building them. Now it's a matter of fitting the LEDs to the body and mounting them. Some bulbs are a little long so I may sand them down to fit the body better. It may also help out with the light dispersion.
Left pic is what will show as the Jeep is still. Right pic is when using reverse. Love it and can't wait to have it all mounted up! There's light at the end of the tunnel!! "thumbsup"
Left pic is what will show as the Jeep is still. Right pic is when using reverse. Love it and can't wait to have it all mounted up! There's light at the end of the tunnel!! "thumbsup"
Tommy R
I wanna be Dave
It was rather time consuming, but I'm really pleased with the outcome. I've got some tweaks to do to the lighting (front marker lights are too bright), but I'm digging this setup from Al (Heyok). "thumbsup"
<iframe frameborder="0" scrolling="no" width="640" height="360" src="http://api.smugmug.com/services/embed/3025607276_pzsLzV2?width=640&height=360&albumId=25438807&albumKey=9wh8j9"></iframe>
<iframe frameborder="0" scrolling="no" width="640" height="360" src="http://api.smugmug.com/services/embed/3025607276_pzsLzV2?width=640&height=360&albumId=25438807&albumKey=9wh8j9"></iframe>
Tommy R
I wanna be Dave
By the way, anyone else notice bent axles on a Yota II axle before? The front is fine, but the rear axles have a definitely "wonkiness" to them. 
STANG KILLA SS
~THE SCALE SHOP~
nice Tommy! I forgot to send you those LEDs
what does the controller look like?
what does the controller look like?
Tommy R
I wanna be Dave
nice Tommy! I forgot to send you those LEDs
what does the controller look like?
No worries, man! I appreciate the offer, though.:mrgreen: The headlights are definitely "dots" behind the lenses, but I'm okay with that. I have some headlight buckets I can try out if I feel adventurous. At this point, it's ready to go so I'm wanting to get it on the rocks!
You're not available for a quick crawl on Saturday, are ya? 8)
STANG KILLA SS
~THE SCALE SHOP~
im ready!
sgtbham
Rock Crawler
Now Im going to have to buy that lightkit.... Turned out great man!
Tommy R
I wanna be Dave
Cory, PM/text if you want to do a little trail run tomorrow.
I'll also get a pic of the LED control unit. Planning on making a video showing lots of details, but haven't had time for it yet.
Thanks a lot! Yeah, I love the light setup.
Tommy R
I wanna be Dave
In preparation for the Jeep's debut (again?) I decided to do a few things. First I added some inner fenders up front to hide all of the electronics. It's just some Lexan that I painted black and applied some flat clear over.
And a few accessories...
I also changed out the rear springs to something stiffer. It had a bit of a tail dragger look and that's not what I was after. This is better...
And a few accessories...
I also changed out the rear springs to something stiffer. It had a bit of a tail dragger look and that's not what I was after. This is better...
Tommy R
I wanna be Dave
So yesterday Cory (Stang Killa SS) and I met up for a trail run at one of our favorite places. We both took pics, but unfortunately mine came out really washed out so I'll mostly be sharing the ones Cory took. Thank, Cory! Had a blast! :mrgreen:
Chocolate Love and Simple Green had great time! :ror:
And yes, the Corrosion X worked like a charm! It was *very* tested for waterproofing...much moreso than what you see here.
Overall, the Jeep did pretty well. It also took some gnarly falls and suffered some scratches, but no mechanical failures and it crawled nicely. I may need to install some new brushes into the Tekin 35t motor, though. It started cogging a bit near the end of the day....even before it was submerged.
Chocolate Love and Simple Green had great time! :ror:
And yes, the Corrosion X worked like a charm! It was *very* tested for waterproofing...much moreso than what you see here.
Overall, the Jeep did pretty well. It also took some gnarly falls and suffered some scratches, but no mechanical failures and it crawled nicely. I may need to install some new brushes into the Tekin 35t motor, though. It started cogging a bit near the end of the day....even before it was submerged.
This one favorite spots too. How did the tires work ? Glad to hear that the Corrosion X worked.
Last edited:
Tommy R
I wanna be Dave
They worked well, but I'm not sure they're any better than the M/T Claws that Cory was running. I think the rigs were fairly similar in capability.
Tommy R
I wanna be Dave
I like it much better with shorter tires... Undecided on the wheels, though.
Rc4wd pro 10's. They would look the part of what you see of most jeep's going down the road. Or Just stick with what you got.
Tommy R
I wanna be Dave
I would, but they're only available in 1.9s and I definitely want 1.5s on this one.
cbp27
Rock Crawler
What about something in the middle, like RC4WD's 1.7 Mickey Thompsons? Or they offer 1.7 stamped wheels. Then you could stretch 1.55 tires over them or run 1.7 Baja Claw TTCs. Just a thought. The Jeep looks awesome all finished up! "thumbsup"
Tommy R
I wanna be Dave
I like those and they'd match the wheels on my 1:1, but they're pricey. Moreso than that, however, I really think smaller 1.5's fit this rig better. 1.7 isn't that much bigger, but you know how it goes with these trucks.....every little bit helps.
