Toyota SR5 1985

[BigSki]

Very nice quality parts, they look like you could use them to produce molds for resin copies of the parts. I really like the dash board, can you share how you did the speedometer gauges?

 

[Say what?]

You have (MAD SKILLS) sir "thumbsup" "thumbsup" "thumbsup" "thumbsup" "thumbsup"

~D

 

[monster 550]

All the parts are impressive, but that instrument cluster is perfect.

 

[MattySlimz1987]

I've seen these exact decals on Ebay the guy who has em, I've bought stuff before from..

Only thing useful is the actual cluster decal on this set and it looks like it might be a low quality image print.. Mr.Rcnerds has all the proper peices including the 4x4 shift pattern label on the glovie..

There's gotta be another decal set somewhere to order just can't find it.

 

[rcnerds]

Very nice quality parts, they look like you could use them to produce molds for resin copies of the parts. I really like the dash board, can you share how you did the speedometer gauges?

I simply use printed speedometer and put small piece of lexan on it : )

I've seen these exact decals on Ebay the guy who has em, I've bought stuff before from..


Only thing useful is the actual cluster decal on this set and it looks like it might be a low quality image print.. Mr.Rcnerds has all the proper peices including the warning label on the glovie..

There's gotta be another decal set somewhere to order just can't find it.

Thx! I made those decals . Here You have it. They are prepared for ink jet printer so it might looks very bright on scereen.

 

[rcnerds]

The chassis is almost ready. I am not really good at gluing plastic so I use here inner fenders from Axial. In the chassis I cut a little battery case and the receiver box to make room for the interior, with was made form styrene. In future here will be more stuff, of course 3d printed. To hold body on it I use 20x3mm magnets. New receiver box now is from traxxas. And YES the cable from the phone to connect the lights.
HELLO- is it me you're building for?

 

[whitrzac]

Where did the fender liners come from? I haven't seen that style before.

 

[saddlesore]

are those magnet body mounts? if so, where did you get them? do they work well?

 

[MattySlimz1987]

That phone line is a brilliant idea to dodge the "birds nest" wiring that rear tail lights entail. Very impressed with your finesse.. ooh that ryhmed..

 

[rcnerds]

Where did the fender liners come from? I haven't seen that style before.

Its Axial lexan fender look HERE

are those magnet body mounts? if so, where did you get them? do they work well?

Yes I use Strong magnets like THIS
And I placed it on THIS in front, in rear I use standard body post with those magnets. Other magnets are glued to body with Shoe goo glue Yes it works well.

That phone line is a brilliant idea to dodge the "birds nest" wiring that rear tail lights entail. Very impressed with your finesse.. ooh that ryhmed..

 

[saddlesore]

Thanks for the magnet body mount tip! I'll be using that in the future!

 

[GoatFarmRC]

I know what my 2nd trail truck is going to be! Your detail work is amazing.

After your done with this you should get some interior parts on shapeways for the Jeep Kit body and RTR!

 

[C*H*U*D]

That dash looks like it came right out of my 85' 4Runner :shock:

Awesome job!

 

[rcnerds]

Toyota body is painted and ready for all 3D printed parts.
The red orange-white paint is a loose interpretation of the iconic Toyota 80s paintings. Lexan was painted from the outside for matte lacquer paint. Weathering may be improved later.

I see a PS-60 door and I want it painted PS-55
No colors anymore I want them to turn PS-55 ; )

 

[rcnerds]

Project Toyota update:
Here is a sneak preview of assembled all 3d printed parts fon toyota pro-line body
Everything fits perfectly. Car is ready to run outside, and it performs well. I set chassis for Scaled competition and take 4th place ( I run without winch.. and lost on the last special stage. So next step will be adding Warn winch. Now I will focus on interior few parts. I will post more pictures from outside soon : )

 

[rcnerds]

Here is some quick preview of my project outside. I will take another photos with smaller tires form cc-01, dirtgrabbers are little to big imo. So this part is done. I will be now focusing on few interior parts.

 

[lilws6]

Looks so good


Sent from my iPhone using Tapatalk

 

[rcnerds]

OK. A little update, I design some rest of interior. Here is some render preview.

 

[Say what?]

Wow :shock: that is over the top sir "thumbsup" "thumbsup" "thumbsup" 8) 8) 8)

~D

 

[MattySlimz1987]

Truck looks awesome!!
If you release these interior parts soon, I'll add them to the Dinky Rc honcho interior I have waiting to be put in. It fits well inside the Sr5 body even though it was designed for the Honcho, I'll try my best to work it in there and make these interior peices fit.

Here's my truck so far using some of your parts. Still have to add your door handles and rear window frame but so far they have worked out excellent! Thank you for sharing these fantastically scale parts!!