DirkDigler
I wanna be Dave
- Joined
- Jan 28, 2004
- Messages
- 5,027
Input voltage: 4-7 Cells (4.8 to 8.4 Volts DC)
Case Size: 1.23"W x 1.80"D x 0.61" H
Weight: 2.71 Ounce
Motor Limit: 10-turns* (540 Size)

On Resistance Forward: 0.006 Ohms
On Resistance Reverse: 0.006 Ohms
Peak Current - Forward: 150A
Peak Current - Reverse: 150A
Braking Current: 75A
Continuous Current: 30A
BEC Voltage: 6.0 VDC
BEC Current: 1000mA
Power Wire: 14 Gauge / 5"
Input Harness Wire: 26 Gauge / 9"
Transistor Type: MOSFET
PWM Frequency: 2000 Hz
Thermal Protection: Thermal shutdown
Profile selection: 100% fwd, 100% brakes, 100% rev
100% fwd, 100% brakes, no rev.
100% fwd, 100% brakes, 25% rev.
Single-button setup: Yes
Case Size: 1.23"W x 1.80"D x 0.61" H
Weight: 2.71 Ounce
Motor Limit: 10-turns* (540 Size)

On Resistance Forward: 0.006 Ohms
On Resistance Reverse: 0.006 Ohms
Peak Current - Forward: 150A
Peak Current - Reverse: 150A
Braking Current: 75A
Continuous Current: 30A
BEC Voltage: 6.0 VDC
BEC Current: 1000mA
Power Wire: 14 Gauge / 5"
Input Harness Wire: 26 Gauge / 9"
Transistor Type: MOSFET
PWM Frequency: 2000 Hz
Thermal Protection: Thermal shutdown
Profile selection: 100% fwd, 100% brakes, 100% rev
100% fwd, 100% brakes, no rev.
100% fwd, 100% brakes, 25% rev.
Single-button setup: Yes