Ultimate 1/6 Nylint mod guide 2.0

hotrodzach · Oct 1, 2006

It has been said that the ultimate mod guide needed some organizing since it has so many links, so i decided to make a new one. thanks to run2jeepn for his original mod guide and to the mods for making this a sticky.

The Ultimate 1:6 Nylint mod guide - Links to every modification! - by run2jeepn

The mods are listed in categories.

Funrise

Return to center shut off

Axles

Pulley Fix

Axle Breakdown Pics

Lock in low

shaved rear axle

fix rear axle break

Skid plates

front dig set up

O-Ring part #

shaved rear axle

Batteries

Definitive 1:6 Battery Thread

Custom Battery

Another battery

Body

comp cut rear and rock sliders

Dovetailed Jeep

My Dovetailed jeep

Rocker Guards

Snow Plow

Jeep to Toyota

Rear Deck/Tanneau Cover Mod

Dash Mod

Winch

LED lights

Narrowed Scorpion

Tummy Tuck

tummy tuck

tummy tuck

Tummy tuck, extended wheelbase and wheel mod

1in Lift Blocks, Tummytuck, and Skinny Wheels

Tummy Tuck

Suspension

lift blocks to give 1" lift

More Flex

limiting straps

Lift and more articulation

Easy Shock Relocation Bracket

Savage Shock Conversion

Four Link Front and Rear

Fossiljunkie's Four linked nylint

Adjustable shock bracket

Steering

knuckle idea

Knuckle fix. For older chassis

Want more Steering Umph? Try these

4 wheel steering

Stick Chassis

Wrecker's First Stick

Wrecker's Second Stick

Merlin's Stick

Vader's Stick

Tires

Moab tires

No more beadlocks
-Dalton

hotrodzach · Oct 1, 2006

Good Build Threads

CamoTJ’s build thread

jcd’s trail rig mods

run2jeepn’s extreme nylint

Jeepernick’s build thread

Wrecker’s two sticks
1
2

-Dalton

hotrodzach · Oct 1, 2006

run2jeepn · Oct 2, 2006

I have been checking on things to keep it updated. I really haven't seen much worth putting in there. It seems to be the same old stuff just redone. And alot of the new so called Mods are just Crap. Sorry.......The basic Mod's that everyone should do if they don't go the Stick route is still the same. Tummy Tuck, Savage Shocks, Shave rear axle, F&F Battery, Lexan Body, and maybe some XL Moabs. Which I don't think will help unless to stick it to save the weight. Other then that there really isn't much to do. Sides Nylints are being trashed faster then anyone can make them. If they even make them anymore. Sorry. Nylints are going Bye Bye.....

kerrywittig · Oct 27, 2006

Modifying the belt pulleys

A common problem with the plastic drive pulleys is that they are two pieces that simply have a peened via heat way of joining the two halves together. After a time they start to seperate which lends itself to making for not only an unstable component, but as they seperate from the play in the three points where they are joined together the pulley actually becomes a "smaller" diameter and leads to the belt(s) slipping here is a fix with pix.................

!. Drill out the plastic attachment points one at a time with a 1/8th inch drill.
2. After drilling out just ONE.........insert a 1/8th inch X 1/4 inch long aluminum rivet with a backing washer. Then move on to the next one and repeat...........
3. What ever excess of the rivet that is remaining grind off so it will no impede the pulley from spinning unobstructed.

4. Done..................

Hope this is helpful to others...............Kerry

kerrywittig · Oct 27, 2006

Part 2

trickedoutTLT06 · Nov 11, 2006

^^ Best mod yet!

clod booster · Dec 20, 2006

id like to see a dually mod

Ultimate 1/6 Nylint mod guide 2.0

hotrodzach

Rock Crawler

hotrodzach

Rock Crawler

hotrodzach

Rock Crawler

run2jeepn

I wanna be Dave

kerrywittig

Quarry Creeper

Attachments

kerrywittig

Quarry Creeper

Attachments

trickedoutTLT06

RCC Addict

clod booster

Rock Crawler

Similar threads