• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.
  • RCSC

Venom 1/8 Scale GPV-1

AxelRod

Rock Stacker
Joined
Feb 14, 2008
Messages
59
Location
THE IDAHO PAN HANDLE
Have you guys seen this?

Fiberglass/Carbon Hybrid chassis plates (50%FG/50%CF)
3 position adjustable Rake Angle
3 position adjustable Rear Shock Angle
8 Machined Teflon Pistons for the Front Forks, 2 per fork, extras to tune with
4 Machined Teflon Pistons for the Rear Shock
3 Machined Teflon Bushings per fork, plus two pistons = total 5 bushings each
Dual O-rings per fork and for the Rear Shock
Venom Racing V5 compound Natural Rubber Racing Tires
Molded Foam Rear Insert
Molded Rubber Front Insert
Indexable Cam Chain Tensioner
Dual Steering Dampeners
Quick Change Spur Gear Hub
Composite Fork Tubes and Shock Body
One piece molded Truss Style Rear Swing Arm
Quick Change Axles with captured lock nuts
Prepainted Polycarbonate Bodywork
Prepainted Neocel Foam Scale Rider Figure
Molded Scale features like rotors, exhaust pipe, handle bars and calipers
3 Channel FM radio with 3rd Channel Mixing for Digital Brake Bias Adjustment
6cell 1200mah NiMH battery pack
Fireball 370 brushed motor
Brushed ESC with push button set up and two profiles

More info here:"thumbsup"
http://www.venom-group.com/storeitems.asp?section=Land&cc=MODEL_MOTO


GPV-1_BODY3.jpg


GPV-1_NO_BODY2.jpg
 
Last edited:
nice! anyone know if there is a steering damper upgrade that will be available?

looks nice. it's nice to see the motorcycle segment get bigger, and with an entry at a reasonable cost....
 
here is the list of option parts.

OPTION PARTS
Alloy Fork Set with Preload Piston
Alloy Tripple Clamps
Alloy Rear Shock
Alloy Chassis Blocks
Alloy Steering Stem Set
Steering Bearing Set
Race Chassis Set (3position Rake Angle/5 position Wheelbase/20deg shock angle adjustment range)
Brake Kit - takes advantage of the 3rd channel mixing in the standard radio
Wheel sets - 5/6/7 spoke front rear wheels in pairs, Y-spoke standard
Race Tires V1 - softest compound, V3 - Med Comp
Brushless Motor
Brushless ESC
Lipo Packs
Pinion Gears
Clear Body Set
Unpainted Rider

There is no steering damper upgrade yet...
 
I'd love to get a bike... just afraid fast big circles in a parking lot would get old.

Oh yeah, and how does that thing steer? No handle bars.
 
I'd love to get a bike... just afraid fast big circles in a parking lot would get old.

Oh yeah, and how does that thing steer? No handle bars.

The rider when on the bike does hold handle bars, but they are not attached to the forks.

The steering works through a servo and dampening system which you can see in the second picture. when you want to turn, input some steering like a car, then counter the opposite way to balance it through the corner. When coming out of the corner, input a little more counter steer to bring it back straight. Its similar to driving a real motorcycle. Its very easy to drive (IMO) and even if you fall over, there are guide bars that allow you to start again.
 
Back
Top