Wish I was a prodigy, but now I can drive one.

[TURBOFEST]

Ok finally my first day of vacation where I don't have to think about the running of the NENQ. I still have several follow up calls to make to sponsors. I am out the door to get some wheel time on the Prodigy at my local spot St. Peters."thumbsup"

You Cracccy mang! I don't even want to look at my rigs right now! :lmao:

 

[Jslick]

Figures, I go out to relax and my 3 year old micro sidewinder takes a dump, it was just a matter of time. It has been in 4 different rigs. So I bought a new one and a fresh servo. They should be here by the end of the week. At least it did not do it at the NENQ."thumbsup"

 

[ROWDY RACING]

At least it did not do it at the NENQ."thumbsup"

Like the ones in my 2.2p.

 

[winnerone23]

I am out the door to get some wheel time on the Prodigy at my local spot St. Peters."thumbsup"

That's what I'm talking about John!!!

Sucks about ur ESC tho.. Nothing like goin to get some drive time and wasting the time driving there for something to fail.. Hope you took a second rig!?

Sucks about ur servo at the NENQ too.. Getting it taken care of.

 

[ROWDY RACING]

I'm sure it will be ready for nats!

 

[Jslick]

Oh I'll be ready, should have all my goodies in by Sat. I still need to hit Br00d up for a killer motor to go with a killer chassis. Luckily Troy it is only 10 min from my house. I got 7 packs in before it gave out.

 

[Crawllife]

What motor have you chosen? Brood is a bit broad

 

[Jslick]

We shall see, I like to keep my options open. I have heard good things about the 13t 500 puller motors from JRH. Scatterbrains suggested the chaos from Br00d.

 

[Trubble]

Beautiful rig! Those tires and wheels really set that thing off.



Which paint was used on the windshield and rear bars of the black body?

We shall see, I like to keep my options open. I have heard good things about the 13t 500 puller motors from JRH. Scatterbrains suggested the chaos from Br00d.

I have a handwound Holmes, so I know they make good stuff, I'm sure the 500 is as good as the reports say.
But if you prefer to stay with Br00d, remember he does have on his website the CVR (5 segment) option, jus' sayin'. ( I'm not familiar enough with the Chaos line to know if that's a decent can to start with.)
I've been quite curious about the flat wire option, but since I prefer my Sporty motors to be as subtle as a punch in the face, I'm thinking my next motor will be another Apocalypse, but with the HHK (big wire) option next time.









.

 

[MRCrackhead]

We shall see, I like to keep my options open. I have heard good things about the 13t 500 puller motors from JRH. Scatterbrains suggested the chaos from Br00d.

I have the 13t 500 puller and like it very much.

 

[Jslick]

Thanks for the input guys, got the servo in the mail from servo city, waiting on the esc should be here Monday. After I get paid I can figure out what direction I want to go. I would like to pick up the RCbros shock bodies also to help with my leaky shocks.

 

[winnerone23]

I have the 13t 500 puller and like it very much.

very very very much!


Leaky scx shocks!? Nooooo....

3 o-rings an green slime.. (it's cheaper, i'm cheap, an it works!)

 

[Crawllife]

Hey Trouble, I tried to quote ya so you'd get a notifier but my phone is acting as " smart" as I am. We used faskrome on the bars and pearl charcoal for the base

 

[Trubble]

and pearl charcoal for the base

Oooooooooooooohhh. Nice!

We used faskrome on the bars

You got better results than I did last time I used that stuff. Looks really good. "thumbsup"









.

 

[Crawllife]

Thanks Trubble

 

[Jslick]

New servo and micro sidewinder in today, have some wiring to do and I'll be running again. Cant wait to drive at our clubs favorite crawling spot, Palmerton PA this weekend. We have a scale comp but I'll be up there early for some testing and tuning. Pics to come."thumbsup"

 

[Jslick]

Been searching around, who knows the part number for the Traxxas through pins for the MIP driveshafts?? My rig is a combo of old and new.

Thanks, John

 

[RcBro]

Been searching around, who knows the part number for the Traxxas through pins for the MIP driveshafts?? My rig is a combo of old and new.

Thanks, John

Believe you are looking for these:
TowerHobbies.com | Traxxas Screw Pin 4x15mm Revo (6)

 

[AddictedtoRC1]

Been searching around, who knows the part number for the Traxxas through pins for the MIP driveshafts?? My rig is a combo of old and new.

Thanks, John

John I probably have some here. I'll check tomorrow. :thumbup:

 

[Calderwood]

Been searching around, who knows the part number for the Traxxas through pins for the MIP driveshafts?? My rig is a combo of old and new.

Thanks, John

I'm using the exo pins in my MIPs. They don't stick out like the traxxas pins.