WSUC Winter Series

[billj]

Remind me to bring the measuring tape guys, that thing needs to pass tech 3 times :lmao:

Nice work Mr. Garrett

Better bring a copy of the rules too"thumbsup" it does look good, but looks aint everything:ror:

 

[DickyT]

Also she looks a little long, Good eye DickyT

No issues with too long, it can be any length over 8". I'm curious to see total height and the hood to roof line height ;-)

Minimum bodiless dimensions need to be:

8" long

3 3/4" tall

3" wide

1" from top of hood (chassis plates not the lexan) to roof

If it is out of spec we will let him run, but will be excluded from the finals. If it is in spec then we better watch out, he's on a mission to destroy us :shock:

 

[Mini]

No side panels, i guess we will let you run.But if you make it to the finals you forfeit your position:lmao:Also she looks a little long, Good eye DickyT. All i know is im not giving up my candy without a fight!!!

Good call "thumbsup":lmao:

 

[billj]

No issues with too long, it can be any length over 8". I'm curious to see total height and the hood to roof line height ;-)

Minimum bodiless dimensions need to be:

8" long

3 3/4" tall

3" wide

1" from top of hood (chassis plates not the lexan) to roof

If it is out of spec we will let him run, but will be excluded from the finals. If it is in spec then we better watch out, he's on a mission to destroy us :shock:

Hows that go "we may have awoken a sleeping giant":shock:

 

[DickyT]

Hows that go "we may have awoken a sleeping giant":shock:

That's what Japan said after Pearl Harbor :ror: 4 years later we leveled two of their cities.

I have a printed copy of the rules already in my gear bag ;-), but for bodiless dimensions I do not need to see them. Being involved in the design of two bodiless chassis now I have those numbers etched into memory. "thumbsup"

 

[Tydl]

Better bring a copy of the rules too"thumbsup" it does look good, but looks aint everything:ror:

I just saw it in person, and we are in trouble, it can drive upsidedown!

 

[billj]

I just saw it in person, and we are in trouble, it can drive upsidedown!

YIKE'S :shock:

 

[Mini]

I just saw it in person, and we are in trouble, it can drive upsidedown!

Don't see that as a benefit, and just by this comment don't know if it's in the 1in rule like DT said. We gotta watch this guy he packs heat in his hip lolololololololol. Just like at the first comp rich came his rig was 13.5 when compressed hahhhahaha.

 

[richardgarrett56]

all the panic:lmao: bring your crap and don't forget my candy:twisted:

 

[richardgarrett56]

No issues with too long, it can be any length over 8". I'm curious to see total height and the hood to roof line height ;-)

Minimum bodiless dimensions need to be:

8" long

3 3/4" tall

3" wide

1" from top of hood (chassis plates not the lexan) to roof

If it is out of spec we will let him run, but will be excluded from the finals. If it is in spec then we better watch out, he's on a mission to destroy us :shock:

:lmao:

 

[billj]

:lmao:

Looks good"thumbsup"

 

[DickyT]

:lmao:

You need to measure it straight, not diagonal

Don;t forget this part too:

2.1.4.1.4 - It is required that at least one point of the side-panel must
reach to a span of 1” tall or more & at least one other point of the side-panel must reach to a span of 2.5” long or
more. :mrgreen:

I really hope the rig is within spec, regardless, points for creativity!

 

[Speedracer19]

Side panel is not 2 1/2 inchs wide at any point.
From that photo the 1" roof req. is not met, the 2 1/2 in. mark is about where the top of the chassis rail & the side cage plate meet & if you measure with the rule it's a little under.
Good thinking though.
Trust me i'm using that photo & rule as a guide so I can't say for sure it's not within spec's.

 

[billj]

You need to measure it straight, not diagonal

Don;t forget this part too:

2.1.4.1.4 - It is required that at least one point of the side-panel must
reach to a span of 1” tall or more & at least one other point of the side-panel must reach to a span of 2.5” long or
more. :mrgreen:

I really hope the rig is within spec, regardless, points for creativity!

My panels are cut out where the links bolt on. So does this mean my side panels are illeagle?

 

[DickyT]

My panels are cut out where the links bolt on. So does this mean my side panels are illeagle?

You are good Bill. It only needs to measure 2.5" at one point, you have more than that across the top and bottom.

 

[billj]

You are good Bill. It only needs to measure 2.5" at one point, you have more than that across the top and bottom.

Thanks"thumbsup"

 

[billj]

So are any of the NPB guys coming or not? Have not heard a peep from any of them, come on guys"thumbsup"

 

[DickyT]

So are any of the NPB guys coming or not? Have not heard a peep from any of them, come on guys"thumbsup"

My guess is no, they are afraid to drive :lmao:

 

[richardgarrett56]

Side panel is not 2 1/2 inchs wide at any point.
From that photo the 1" roof req. is not met, the 2 1/2 in. mark is about where the top of the chassis rail & the side cage plate meet & if you measure with the rule it's a little under.
Good thinking though.
Trust me i'm using that photo & rule as a guide so I can't say for sure it's not within spec's.

:lmao:

 

[richardgarrett56]

You need to measure it straight, not diagonal

Don;t forget this part too:

2.1.4.1.4 - It is required that at least one point of the side-panel must
reach to a span of 1” tall or more & at least one other point of the side-panel must reach to a span of 2.5” long or
more. :mrgreen:

I really hope the rig is within spec, regardless, points for creativity!

so like this :lmao: