XR10 Picture Archive

[Eldar]

my XR10 - The Limpet

still stock:
2x Tekin FXR
2x Tekin 35T
Hitec 7955 with Robitronic Servomount
CC Bec 10A
Punk Dig
HB Sedona Tires

greetings
Eldar

 

[tyrod_emmons]

 

[XR10-ROLLER503]

up dated xr10

well i wised up and ditched the Novak m2 dig got a tekin fxr with punk dig which is a way better set up. currently still running the tera claw motors but i do have the tekin 45t in the mail. wireing will be cleaned up when my wire loom comes in. i also did ax10 wheels on the rear to widen the rear up to the same width as the front axle

 

[smanders]

Just got done painting last night. I'm probably gonna de-anodize the servo horn and wheel locks.

 

[fallin apart]

Axial XR10
Y-Town BJV4 chassis
Dual FXR's
Brood 40T motors
Hitech HS-7950TH servo
Vanquish Motor plates
Vanquish Tranny cases
HR hardened steel gears
RR Steel pinions
Vanquish SLW V3 1" wheels (x4) (14 oz. in front, 2.5 oz. in rear) (350 hubs front / 475 rear)
Vanquish Chubs
Vanquish Knucles
Vanquish Lockouts
Nova dual stage 5.5 foams
HB Rovers (white) (x4)
CKRC servo protector
Integy 1:5 scale HD servo arm
Custom battery mount
BWD Links
BWD rear axle mount
BWD front servo mount
Custom steering link
Traxxas Big Bores (losi gold springs)
Futaba 4PK

 

[dexcrawler]

Here is my rig
UGC VIPER chassis
Big Bore with Jeepdoug caps and losi MRC firm springs
FUTABA 4PL
Dual Tekin FXR Speed Control
TorqueMaster Pro 540 Handwound 45t
Castle BEC
HITEC 7950@7.4v
AXIAL lower links and custom made rear lower links
AXIAL ax10 streering link
Custom made front battery mount
RC4Wd gears
VP knuckle weights
VP FR & RE Motor Plates
VP FR half top axle
VP Front & Rear Link Mount
VP Front & Rear Transmission
VP Stearing Knuckles
VP C Hubs
VP Rear lockout
VP DH ProComp II"s
VP SLW V3's 1.0"
VP SLW V1's 0.7"
2*DualSky 3s lipo 30C 1000
2*DualSky 3s lipo 45c 800

Hot Bodies Rovers
Hot Bodies Sedona
Losi Boss crawler
Losi Comp crawler
PL Chisel G8
PL dual stage Foams

 

[ebomb]

 

[FlightInstrukta]

couldn't resist this shot!!!

XR-10
Y-Town BJ4 chassis(soon to be 4.2)
Duel Tekin FX-R's w CC BEC and a wantamix dig controller on DX3R
HH Crawlmaster 16t's
JR 9100THV w/ racers edge horn
VP knucks, chubs, lockouts, servo guard, and 1" SLW V3's w/ sedonas and VP foams( bout to install VP plates cases and RC4WD gears, and Ti shafts w/ gearscience lube)
custom steering link
custom rear link mount( lower mounts were shaved off, and now links mount next to the shocks) dont be jealous... lol
RR front axle battery plate
Hyperion 3s 1300 mah lipo
BWD links upper and lower
losi golds on stock limited shocks w/ 25 weight

no build thread yet... sorry

 

[EGG]

Xr10 kit
axial carbon fiber chassis set
chaotic Ti upper and lower links
chaotic Ti straight steering
traxxas revo/jatto rod ends
traxxas 5x8x2.5 bushing
2x vanquish motor plate black
2x vanquish trans case black
vanquish knucks black
vanquish chubs black
vanquish lockouts black
vanquish DHII's black
-460 hubs, black rings, .6 cal weights
vanquish SLW v4 black
-585 DH hubs, black DHII rings, .6 CAL weights
HB rovers white dot
proline memory foams
vanquish rear link mount black/red
vanquish front link mount black/red
2x Rc4wd gear set
robitronic servo arm 20mm
Gmade g-transitions shocks 90mm
2x tekin FXR
2x 35T HH torquemaster pro
hitec 7950TH
castle BEC 6.0v
NEW futaba 4pl futaba R2104GF Rx
14ga silicone wire, deans
BWD electronics plate
BWD servo plate/rear axle brace combo
axial ax80007 servo mount
axial red post
red HR wheel hexes
proline bug body

wheel base: 12.5"
belly clearance: 3.5"
weight: ?

Build thread:http://www.rccrawler.com/forum/showthread.php?t=316243

 

[Cmace23]

Still a work in progress front lowers have been changed since this pic (to links otw)

 

[tqcookie]

Stock Chassis & shocks
Freqeskinz Graphics
DX3R
Tekin RS Speed Control
Punk RC Dig
Castle BEC
JR 8711 Servo
Chaotic Crawlers Lower Links
Chaotic Crawlers Steering Rod
VP Motor Plates
VP Rear Transmission
VP Stearing Knuckles
VP C Hubs
VP DH ProComp II"s
VP SLW V4's
VP Servo Armour
Hot Bodies Rovers
Crawler Inovation Foams

 

[tyrod_emmons]

 

[Bottoms Up]

UGC Viper
Tekin 45T's
2 FXR's
VP goodies, knuckles, chubs, lockouts, motor plates, SLW V4 wheels.
Big Bores, Losi springs, gold and grey.
White Rovers
Nova Ark Foams
BWD links
Rowdy Racing Battery mount
94780m Airtronics servo
Castle 10a bec
Custom cut my fingers up Monster Tin Skins

 

[Cmace23]

You stole my color scheme idea I had! Looks good "thumbsup"

 

[Bottoms Up]

You stole my color scheme idea I had! Looks good "thumbsup"

Im sure im not the first. Do it up too.
It is an expensive body... took me 7 cans x $2.50 ea to get it right :shock:

 

[Adam62_cz]

My new XR8)

 

[DeeBo66]

TEKIN FXR
PUNK DIG
CASTLE BEC
WHITE ROVERS
HITEC 7950
BWD ELEC TRAY
VP TRANS CASE
VP MOTOR PLATE
VP SERVO ARMOR
VP LOCKOUTS
VP CHUBS
RC4WD GEARS
HOLMES 45T

 

[JRW7072009]

There are some bad ass RC crawlers here!

Here is my junk.

 

[ebomb]

 

[ebomb]

and another