RCCrawler Forums

TZona · 12-20-2010, 08:19 PM

first one in stock position what is a good futaba servo? what specs should i look for?
is there a direct replacement for the 3 speed?
when working on the body is primer then steel wool the best way to get it smooth?

thanks for any help, i'll add more when i think of them

mud-sweat-gears · 01-03-2011, 08:44 AM

On the servo just at least get a metal gear for longivity with at least 100 lb of torque. This would work S3305 High-Torque Std Servo MG. Use 2 to 3000 grit water type sandpapper. Get it at a autobody shop or a place that sells car paint on the body! Dont use steel wool
Todders

the_ghetto_rig · 01-08-2011, 06:46 AM

I thought RC4WD had a clocked tranny that fit the F350...I made a custom mount and dropped in an Axial one....

12-20-2010, 08:19 PM	#1
TZona Rock Stacker Join Date: Jul 2006 Location: Elizabethton,TN Posts: 56	stock high lift questions first one in stock position what is a good futaba servo? what specs should i look for? is there a direct replacement for the 3 speed? when working on the body is primer then steel wool the best way to get it smooth? thanks for any help, i'll add more when i think of them

01-03-2011, 08:44 AM	#2
mud-sweat-gears Rock Crawler Join Date: Jul 2008 Location: Williamston Posts: 941	On the servo just at least get a metal gear for longivity with at least 100 lb of torque. This would work S3305 High-Torque Std Servo MG. Use 2 to 3000 grit water type sandpapper. Get it at a autobody shop or a place that sells car paint on the body! Dont use steel wool Todders Last edited by mud-sweat-gears; 01-03-2011 at 08:50 AM.

01-08-2011, 06:46 AM	#3
the_ghetto_rig Rock Crawler Join Date: Jul 2008 Location: River Falls Posts: 673	I thought RC4WD had a clocked tranny that fit the F350...I made a custom mount and dropped in an Axial one....

Sponsored Links

RCCrawler Forums

Thread: stock high lift questions