|
| LinkBack | Thread Tools | Display Modes |
01-29-2009, 07:55 AM | #1 |
Quarry Creeper Join Date: Oct 2008 Location: Oakley
Posts: 219
| not your normal 1.9 project build
Although I'm not actually building a full scale 1.9 (yet), I thought I would present a little insight on building 1.9 scale parts. This Thread may be slow at time's on my part ( I am quite busy) but If you have questions please ask as the intent of this is to not only get you interested in my products but also show some people whats involved in the makings of custom parts. so it all starts here this takes time, give me a minute |
Sponsored Links | |
01-29-2009, 08:22 AM | #2 |
Quarry Creeper Join Date: Oct 2008 Location: Oakley
Posts: 219
|
I start with this as some of you will be getting them soon |
01-29-2009, 08:51 AM | #3 |
RCC Addict Join Date: Jul 2006 Location: Johnston SC
Posts: 1,562
|
well let me say these rims look great. personally i think they are the best that i have seen yet. i would love to get a set eventually. i am assuming that this will be primarily cad and cnced parts you will be making. and if you just make parts for now the thread is probably going to be moved to a different section. but great job on the rims.
|
01-29-2009, 09:04 AM | #4 |
Quarry Creeper Join Date: Oct 2008 Location: Oakley
Posts: 219
|
It may need moving, wasnt sure where to put this starting with a few needed items Aluminum from here they get outsourced to a cnc lathe for turning, these are somewhat generic at this point |
| |