Re: Justin's Street(1.9) Truck: SCX10 Hilux.... Quote:
|
Re: Justin's Street(1.9) Truck: SCX10 Hilux.... Got some new wheels this weekend, GH jigsaw 1.9 beadlocks....$66 for a set.http://warcrc.org/forum/images/smilies/biggrin.gif They usually get mounted with the nut exposed but decided to mount them in reverse....its pretty cool they use scale looking bolts. Just a bit harder to bead, but the flashpoints mounted pretty easy. RPPhobby link... CLICK HERE>>> Golden Horizons Aluminum JigSaw 1.9 in Wheel (2) http://i80.photobucket.com/albums/j1...x/IMG_0012.jpg http://i80.photobucket.com/albums/j1...x/IMG_0015.jpg http://i80.photobucket.com/albums/j1...x/IMG_0018.jpg |
Re: Justin's Street(1.9) Truck: SCX10 Hilux.... i am liking the new wheels they have the slick but tough look!"thumbsup" |
Re: Justin's Street(1.9) Truck: SCX10 Hilux.... new wheels look sick!! |
Re: Justin's Street(1.9) Truck: SCX10 Hilux.... Quote:
Justin, Quote:
Justin, |
Re: Justin's Street(1.9) Truck: SCX10 Hilux.... Not too much to update, swapped in some Super 300 CVDs and went back to the tango downs. The hummer wheels have too little offset to allow for 8Deg VP hubs and Knuckles to clear the tire. I have some shot with the 8 deg setup later, I had to toss this together for this weekends comp. I can't wait to have zero ackerman in this truck.:D Here are some poser shots, got my new photo booth setup.:D http://i80.photobucket.com/albums/j1...X/IMG_2028.jpg http://i80.photobucket.com/albums/j1...X/IMG_2032.jpg |
Re: Justin's Street(1.9) Truck: SCX10 Hilux.... Here are some pics from this past weekends WARCRC Scale Comp# 3. http://i80.photobucket.com/albums/j1...3/IMG_1656.jpg http://i80.photobucket.com/albums/j1...3/IMG_1660.jpg http://i80.photobucket.com/albums/j1...3/IMG_1662.jpg http://i80.photobucket.com/albums/j1...3/IMG_1664.jpg http://i80.photobucket.com/albums/j1...3/IMG_1658.jpg |
Re: Justin's Street(1.9) Truck: SCX10 Hilux.... Love this rig, one of my top ten rigs on this site for sure. Brillaint images as well, who ever took them. Cheers T |
Re: Justin's Street(1.9) Truck: SCX10 Hilux.... Nice!! I just got a set of those wheels... I drilled them Out to accept 3mm hardware though!! Pita!!! But I think it's easier to assemble.. Tapped the back piece of the Tim to 3mm and drilled the front Piece to 1/8". They have a very narrow offset though huh? Truck looks good with them on there |
Re: Justin's Street(1.9) Truck: SCX10 Hilux.... Quote:
Quote:
I like the those wheels too but the hardware doesn't last very long and the offset is too low for my taste.:mrgreen: |
Re: Justin's Street(1.9) Truck: SCX10 Hilux.... Not to much to update but I was able to pull another 1st place finish at this last weekends WARCRC scale comp. Even with a spare Hitec 645mg for a steering servo.:lmao::mrgreen:........I have been slacking on putting in my new Hitec 7950 servo.:oops::mrgreen: http://i80.photobucket.com/albums/j1...-CLASSONE-.png Thanks to Jeremy (Pointman) for the great pic. http://i589.photobucket.com/albums/s...2/2c749c54.jpg |
Re: Justin's Street(1.9) Truck: SCX10 Hilux.... Got a Heyok winch controller....no more drifting winch! Out comes the bolts... http://i80.photobucket.com/albums/j1...x/IMG_3032.jpg Ripping out the stock junk... http://i80.photobucket.com/albums/j1...x/IMG_3037.jpg Quick soldering and all done. http://i80.photobucket.com/albums/j1...x/IMG_3040.jpg Tight fit.;) http://i80.photobucket.com/albums/j1...x/IMG_3043.jpg Also put in some 8deg VP knuckles and C-Hubs.:D http://i80.photobucket.com/albums/j1...x/IMG_3045.jpg http://i80.photobucket.com/albums/j1...x/IMG_3048.jpg http://i80.photobucket.com/albums/j1...x/IMG_3050.jpg Moo! http://i80.photobucket.com/albums/j1...x/IMG_3052.jpg |
Re: Justin's Street(1.9) Truck: SCX10 Hilux.... Few current pics.:mrgreen: http://i80.photobucket.com/albums/j1...R/IMG_3234.jpg http://i80.photobucket.com/albums/j1...R/IMG_3237.jpg |
Re: Justin's Street(1.9) Truck: SCX10 Hilux.... this is a super bad ass build!!! really man!!!!!! |
Re: Justin's Street(1.9) Truck: SCX10 Hilux.... http://i80.photobucket.com/albums/j1...x/IMG_3052.jpg Looking good! I know one cow is a standard unit of measurement in the Ukraine, what does it equal in cm or inches? Thanks. |
Re: Justin's Street(1.9) Truck: SCX10 Hilux.... Quote:
Quote:
|
Re: Justin's Street(1.9) Truck: SCX10 Hilux.... Decided to change up the paint color before the 2012 Axial Scale Championship. Went with a Tamiya Metallic Blue. http://i80.photobucket.com/albums/j1...psec0df7c2.jpg http://i80.photobucket.com/albums/j1...psa8bbd514.jpg http://i80.photobucket.com/albums/j1...pse348b843.jpg http://i80.photobucket.com/albums/j1...psef06adc3.jpg I also made some quick air tanks from the Wild Willy's driver parts tree. http://i80.photobucket.com/albums/j1...ps94a69cac.jpg I added a proline box too but I cut the bottom off...it sat to high I thought. http://i80.photobucket.com/albums/j1...ps8e496278.jpg |
Re: Justin's Street(1.9) Truck: SCX10 Hilux.... http://i80.photobucket.com/albums/j1...psdad931cd.jpg I didn't have to do too much at all to this rig prior of the 2012 Axial NorthWest Scale Championship event, just touched up the paint. This truck drove pretty well, but after drive my "Mini Me", this truck needs to drop some pounds.:D I finished 18 out of 28 drivers, courses were pretty good and had a lot of fun driving. http://i80.photobucket.com/albums/j1...pse0a729e5.jpg http://i80.photobucket.com/albums/j1...psd70713c7.jpg http://i80.photobucket.com/albums/j1...psc546abcf.jpg http://i80.photobucket.com/albums/j1...ps149e60d6.jpg |
Re: Justin's Street(1.9) Truck: SCX10 Hilux.... Here are some action shots of me running the courses, thanks to Jeremy (Pointman) for the pics. http://i80.photobucket.com/albums/j1...psbd2e4fcd.jpg http://i80.photobucket.com/albums/j1...psc2cf5ca2.jpg http://i80.photobucket.com/albums/j1...ps42eeb4fc.jpg http://i80.photobucket.com/albums/j1...ps962d79d4.jpg |
Re: Justin's Street(1.9) Truck: SCX10 Hilux.... Picked up a MadDog winch spool, this thing is very nice."thumbsup" http://www.rccrawler.com/forum/scale...ums-*new*.html http://i80.photobucket.com/albums/j1...x/IMG_9075.jpg |
All times are GMT -6. The time now is 12:20 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com