RCCrawler Forums

TLTCrawlin · 06-23-2009, 06:09 PM

I will be doing the flatbed after vacation, but just a roller with cab before july 3rd.

The parts:

Running gear:
•Axial axles, aluminum knuckles/axle C's, tylerV lockers, thundertech shafts
•Axial transmission, aluminum housing

Electronics:
•CC Sidewinder, CC Bec, DS 8711, 27t axial motor, MX3 TX, Hitec RX (mini RX), 3s common sense lipo

Suspension:
•SCX frame, steel links, 4" losi shocks

Tires/rims:
•Pro-Line Flat Iron 1.9s
•Axial 1.9 black beadlocks with grey rings

Body
•Tamiya hilux cab, grill, etc
•Custom flatbed that will be a copy of the one below

TLTCrawlin · 06-23-2009, 09:02 PM

What I will do:

Colby · 06-23-2009, 11:11 PM

ooohhh looks promising! Cant wait!

Decimati · 06-24-2009, 10:01 AM

This is definitely going to be a good build to watch.

TLTCrawlin · 06-24-2009, 02:26 PM

RCPCrawlers=THE fastest shipping on the board

The color: Ultra Flat Khaki Krylon Camo

On my work bench

Axial ax10 axles compared to a hilux cab

You can barely see the axle nuts poking out the side.. Perfect.

TLTCrawlin · 06-24-2009, 09:11 PM

got bored, i should have waited til I was gonna fill in the holes and put a back on it, but it will run like this for awhile:
Ultra Flat Khaki Krylon:

ctrwannabe · 06-24-2009, 09:39 PM

Should be a good build I'm watching.

TLTCrawlin · 06-24-2009, 09:43 PM

Hopefully it becomes a roller tomorrow, then ill mount the cab, and get pics of it at the beach in a week.

TLTCrawlin · 06-25-2009, 08:08 PM

7mp

rckjeep · 06-25-2009, 08:13 PM

I like the desert tan. It works well with the flat black hood. I did the same thing just with a gloss grey. Keep it going.

LorenzoZ · 06-25-2009, 08:31 PM

This is gona be a Nice Nice Nice one .. i can feel it

Good work

TLTCrawlin · 06-25-2009, 09:16 PM

I got a question, I was going to run no weights in the beadlocks but after some talkin to some guys in my club, I figured it would be a good idea.

What should I run in each front wheel and each rear wheel?

LIKES2CRAWL · 06-26-2009, 02:35 AM

Looking good Spence, but why didn't you put this thread in the SCX section?

TLTCrawlin · 06-26-2009, 10:46 AM

Quote:

Originally Posted by LIKES2CRAWL

Looking good Spence, but why didn't you put this thread in the SCX section?

Thanks, I was thinking about it. Im heading out of town but will do some more work monday to get this thing rolling. Wanna go to hobbytown next week?

LIKES2CRAWL · 06-28-2009, 03:08 PM

Is this thing done yet? What's taking so long?

Colby · 06-28-2009, 03:19 PM

Quote:

Originally Posted by TLTCrawlin

I will be doing the flatbed after vacation, but just a roller with cab before july 3rd.

TLTCrawlin · 06-29-2009, 12:39 AM

I just got back from my mini vacation to a hill climbing event and now next weekend is the big trip. So this week will be a rtr minus flatbed rig.

Updates tomorrow. Along with some vids of my hill climbing

justinart24 · 06-29-2009, 12:59 AM

Sick build.

Do you have a full version of Rhino or just the trail? I started using Rhino back in 98, fun program.

TLTCrawlin · 06-29-2009, 01:24 AM

Trial, without any more saves :(

I use it during school, along with autocad (high school drafting class)

TLTCrawlin · 06-29-2009, 05:14 PM

2wd til I buy a longer male Thunder Tech shaft
Body mounted
Driveshaft (after beach)

06-23-2009, 06:09 PM	#1
TLTCrawlin I wanna be Dave Join Date: Apr 2005 Location: Eastern WA Posts: 2,489	Toyota 1.9 Truggy I will be doing the flatbed after vacation, but just a roller with cab before july 3rd. The parts: Running gear: •Axial axles, aluminum knuckles/axle C's, tylerV lockers, thundertech shafts •Axial transmission, aluminum housing Electronics: •CC Sidewinder, CC Bec, DS 8711, 27t axial motor, MX3 TX, Hitec RX (mini RX), 3s common sense lipo Suspension: •SCX frame, steel links, 4" losi shocks Tires/rims: •Pro-Line Flat Iron 1.9s •Axial 1.9 black beadlocks with grey rings Body •Tamiya hilux cab, grill, etc •Custom flatbed that will be a copy of the one below

06-24-2009, 09:43 PM	#8
TLTCrawlin I wanna be Dave Join Date: Apr 2005 Location: Eastern WA Posts: 2,489	Hopefully it becomes a roller tomorrow, then ill mount the cab, and get pics of it at the beach in a week. Last edited by TLTCrawlin; 06-25-2009 at 12:50 PM.

06-29-2009, 05:14 PM	#20
TLTCrawlin I wanna be Dave Join Date: Apr 2005 Location: Eastern WA Posts: 2,489	2wd til I buy a longer male Thunder Tech shaft Body mounted Driveshaft (after beach) Last edited by TLTCrawlin; 06-29-2009 at 11:06 PM.

06-23-2009, 09:02 PM	#2
TLTCrawlin I wanna be Dave Join Date: Apr 2005 Location: Eastern WA Posts: 2,489	What I will do:

06-23-2009, 11:11 PM	#3
Colby WOOPOOW!! Join Date: Nov 2008 Location: Atlanta, GA Posts: 4,218	ooohhh looks promising! Cant wait!

06-24-2009, 10:01 AM	#4
Decimati Newbie Join Date: May 2009 Location: San Jose Posts: 23	This is definitely going to be a good build to watch.

06-24-2009, 02:26 PM	#5
TLTCrawlin I wanna be Dave Join Date: Apr 2005 Location: Eastern WA Posts: 2,489	RCPCrawlers=THE fastest shipping on the board The color: Ultra Flat Khaki Krylon Camo On my work bench Axial ax10 axles compared to a hilux cab You can barely see the axle nuts poking out the side.. Perfect.

06-24-2009, 09:11 PM	#6
TLTCrawlin I wanna be Dave Join Date: Apr 2005 Location: Eastern WA Posts: 2,489	got bored, i should have waited til I was gonna fill in the holes and put a back on it, but it will run like this for awhile: Ultra Flat Khaki Krylon:

06-24-2009, 09:39 PM	#7
ctrwannabe RCC Addict Join Date: Jun 2007 Location: San Antonio, Tx Posts: 1,093	Should be a good build I'm watching.

06-25-2009, 08:08 PM	#9
TLTCrawlin I wanna be Dave Join Date: Apr 2005 Location: Eastern WA Posts: 2,489	7mp

06-25-2009, 08:13 PM	#10
rckjeep I wanna be Dave Join Date: Jun 2004 Location: San Jose Posts: 5,207	I like the desert tan. It works well with the flat black hood. I did the same thing just with a gloss grey. Keep it going.

06-25-2009, 08:31 PM	#11
LorenzoZ Quarry Creeper Join Date: Oct 2007 Location: Ranch Posts: 240	This is gona be a Nice Nice Nice one .. i can feel it Good work

06-25-2009, 09:16 PM	#12
TLTCrawlin I wanna be Dave Join Date: Apr 2005 Location: Eastern WA Posts: 2,489	I got a question, I was going to run no weights in the beadlocks but after some talkin to some guys in my club, I figured it would be a good idea. What should I run in each front wheel and each rear wheel?

Sponsored Links

06-26-2009, 02:35 AM	#13
LIKES2CRAWL I wanna be Dave Join Date: Jun 2005 Location: KENNEWICK, WA Posts: 2,513	Looking good Spence, but why didn't you put this thread in the SCX section?

06-28-2009, 03:08 PM	#15
LIKES2CRAWL I wanna be Dave Join Date: Jun 2005 Location: KENNEWICK, WA Posts: 2,513	Is this thing done yet? What's taking so long?

06-29-2009, 12:39 AM	#17
TLTCrawlin I wanna be Dave Join Date: Apr 2005 Location: Eastern WA Posts: 2,489	I just got back from my mini vacation to a hill climbing event and now next weekend is the big trip. So this week will be a rtr minus flatbed rig. Updates tomorrow. Along with some vids of my hill climbing

06-29-2009, 12:59 AM	#18
justinart24 I wanna be Dave Join Date: Feb 2009 Location: Cowtown, USA Posts: 2,780	Sick build. Do you have a full version of Rhino or just the trail? I started using Rhino back in 98, fun program.

06-29-2009, 01:24 AM	#19
TLTCrawlin I wanna be Dave Join Date: Apr 2005 Location: Eastern WA Posts: 2,489	Trial, without any more saves :( I use it during school, along with autocad (high school drafting class)

RCCrawler Forums

Thread: Toyota 1.9 Truggy