|
| LinkBack | Thread Tools | Display Modes |
11-10-2010, 08:07 AM | #1 |
Rock Crawler Join Date: May 2009 Location: 354
Posts: 670
| my losi MRC stretched to 12.5 wheelbase scaler
well it started of as a 1.9 comp crawler, but I got bored, because we don't run a 1.9 comp class in our comps so I figure why not just turn her into a scaler, so here it is first the chassis, I bought a 1/2" square tubing at our local hardware and heated and bend, at this time I had no idea what body I would use, now I realized it's best to have the body for fitting. here is tipsy as I call here before I hacked her all up, and here's the chassis comparison. sorry guys, this might be the quickest build thread yet for I am not good with camera and also a computer dummy. on the next pick I went and build myself a wheelbase jig that I can use for other scaler projects. here it is for now...thanks for looking |
Sponsored Links | |
11-10-2010, 08:31 AM | #2 |
Rock Crawler Join Date: May 2009 Location: 354
Posts: 670
|
hey guys, here are the list of parts for this build. traxxas stampede driveshaft (fits perfect for the stretched wheelbase) DX3E rx/tx Savox servo (330 in-oz.) stock esc. for now with external BEC 1000 mah 2s lipo insane 370 motor. losi MRC tranny ( all metal gear conversion) Losi MRC axles with steel lockers custom lower links and stock lower links will now be the upper link to make it 4-link. flatiron tires and Axial wheels. the body is a 1980 chevy pickup. later... |
| |