Toyota Tundra Truggy

[zion23]

heres the spec so far

had change up the front links it actually got shorter due to the front 4 link set up compared to my old 3 link pan hard set up
13 inches axle to axle
6 " rear links
7" front links
width around 10 " with the tires not to sure

fully tube custom chasis made completly from scratch even the frame rails built by ARNEL here on rccrwaler lynwood wa
vp axles
vp hubs
vp knuckles hi clearence
axial cvd upgraded gunner pins
grip fab locker
under over drive hd gears
custom made links traxxus ball ends
custom servo mount into frame
toyota tundra tamiya cab
mip drive shafts
HR alumin wraith tranny housing with one piece robinson gears. idler
holmes hobby water proof bxrl
holmes hobby crawl master pro 13t
mmp and holmes brushless 13.5 now in it
flysky gtb
castle bec
running 3 s batt
mayhem engineering 1.9 monster camo hydro dip wheels with black slammer rings
pitbull mad beast
3 racing winch and controller
rear 93m gmade piggy back shocks
front 100 alumn adj shocks not sure what brand
savox 1232
http://m.youtube.com/watch?feature=y...&v=MiqsuaWSSu0 short run
http://youtu.be/1tGRm84lPgc
http://youtu.be/_pT2rpAJBoM
http://youtu.be/Qx2t6Z85i8E
http://youtu.be/_3nimHsW8dk

[zion23]

[zion23]

[zion23]

[kaneohecrawler]

Kev dia thing is sick! Nice work.

[War Pig]

Nice looking rig! I'm getting ready to help a local guy build his Tundra, I'm going to have him check this out today.

[zion23]

Originally Posted by kaneohecrawler

Kev dia thing is sick! Nice work.

thanks travis i love these new wheels
i dont want to get them dirty... hahahah

[zion23]

Originally Posted by War Pig

Nice looking rig! I'm getting ready to help a local guy build his Tundra, I'm going to have him check this out today.

war pig i live in kent wa ya i had a friend in lynwood build the tube work i tried to weld and make my own on another truggy chasis i had but never came out..ARNEL is the fabricator on this he wanted to try his new welder and went to town on it.... I love it came out awsome...i got the cab all beat up from a friend and didnt want to let it sit so i finally resurected it after a year lol.

[Bigfoot87]

Looking good!

[Bulldog]

Nothing wrong with that!

[zion23]

thanks guys

[KillerBlackbird]

I like the gray paint on the body, I'll probably end up spraying mine a similar shade. Tube work looks great too!

[rocksteadily]

Looks pretty solid!

[zion23]

Originally Posted by KillerBlackbird

I like the gray paint on the body, I'll probably end up spraying mine a similar shade. Tube work looks great too!

thanks yah for the paint i used stainles steel and flat black with gloss black basiclly rattle caned it lol.. with three colors back and forth untill it came out to this color lol.. the cab was in bad shape but with alot of coats of paint it made it look good lol

[Holt]

Awesome rig

[Oz Bruiser]

Great job. I have my own Tundra build going that next year I hope to get into a thread and start doing my own bar work on. I'm sure ill look to some of your work for inspiration.

[zion23]

thanks guys i would like to give a big recognition to ARNEL he is on the boards he did all the tube work started off simple fenders and bumper and then just went to town lol .. he is a good friend of mines and wanted to try out his new welder..Im still adding more things to it and tuning the suspension so far it crawls ill get a video up asap...order me new electronics and interior

[MIKO]

I love the tube work on the sides!

[zion23]

Originally Posted by MIKO

I love the tube work on the sides!

thanks you got a sik tundra yourself i recently added a few more things to the power train and waiting on the new madbeast tires pitbull just came out with. im waiting for a new reciever cause i ruined my last one and bought all new electronics for it i was going to run a pro4 mmp combo but decided to go with my holmes combo

[MIKO]

I like the cut you have going on now better, unless you cut some lugs out of the mad beasts! Is it going to be on rocks or mainly dirt and mud? I like the low speed precision & torque I get with my 35T on the rocks, but I love the brushless power in the dirt & muck. Reason enough to build two rigs ; ]