Everest 16 custom scale build So first off im a first time poster so i apologize if i do something wrong lol. Been a long time rc enthusiest including working at my lfs before it was shut down.Im waiting on my everest 16 to show up. Ive decided i want to do a budget build scale crawler. I have been searching for the past two weeks and can not find any good custom builds for this crawler. Right now im trying to decide on the body. I already know im building a custom chassis out of either aluminum or brass. Ive already worked with brass doing a custom cage and motor stand on a home made airboat and it was very strong. Itll depend on pricing. My biggest hurdle right now is going to be body and wheel base. Any feedback is welcome as well as ideas for bodies. The crawler has a 225mm wheelbase right now so if i want to go 10th scale, ill have to strech it 88mm. Havent found a good body in 14th ish scale yet. Crawler will show up on wednesday and ill start the build. Let me know if im making any mistakes already haha Sent from my SM-N920P using Tapatalk |
Re: Everest 16 custom scale build Check out tamiya bodies, they have great detail and about 1/12 scale which will be a good match for the everest 16 axles. |
Re: Everest 16 custom scale build |
Re: Everest 16 custom scale build Quote:
Sent from my SM-N920P using Tapatalk |
Re: Everest 16 custom scale build Quote:
Sent from my SM-N920P using Tapatalk |
Re: Everest 16 custom scale build did you check the micro or mini thread maybe .just type in the search advance might be able to find something.. good luck and welcome aboard... |
Re: Everest 16 custom scale build I appreciate it. Thank you Sent from my SM-N920P using Tapatalk |
Re: Everest 16 custom scale build Actually there are lots of builds and info on these rigs. Look in the mini crawler section in the exceed maxstone 1/16 thread. I have a thread on my foff jeep built on Everest 1/16 axles running 4s, overdrive in the front all the goodies! |
Re: Everest 16 custom scale build Quote:
Sent from my SM-N920P using Tapatalk |
Re: Everest 16 custom scale build It's a jeep body off of a Canadian tire rc that I modified |
Re: Everest 16 custom scale build Quote:
Sent from my SM-N920P using Tapatalk |
Re: Everest 16 custom scale build I'm not running anything Everest other than the axles and trans now"thumbsup" |
Re: Everest 16 custom scale build Quote:
Sent from my SM-N920P using Tapatalk |
Re: Everest 16 custom scale build And these axles can be tough as hell for dirt cheap. Here's one of my builds. http://www.rccrawler.com/forum/formu...off-build.html |
Re: Everest 16 custom scale build Quote:
Sent from my SM-N920P using Tapatalk |
Re: Everest 16 custom scale build Well it finally showed up along with my new blackjack 9. Unboxed, charged, and hit some wooded hills to try her out. Crawls as expected, tobs of torque roll and not quite as much speed as i was expecting. I know crawlings not about the speed but sometimes wheel speed helps ya in a shitty situation so might upgrade motor to a mamba just to try ithttps://vimeo.com/198230854http://uploads.tapatalk-cdn.com/2017...c39d8b25e6.jpg Sent from my SM-N920P using Tapatalk |
Re: Everest 16 custom scale build So i might have a slight obsession lol http://uploads.tapatalk-cdn.com/2017...9283f01525.jpg Sent from my SM-N920P using Tapatalk |
Re: Everest 16 custom scale build That DX3 looks in primo shape!! Was my go to radio for several years till I upgraded to 4ch |
Re: Everest 16 custom scale build Other than the battery cover missing and the broken antenna, its still as great as ever. My next radio will be a 4 as well Sent from my SM-N920P using Tapatalk |
Re: Everest 16 custom scale build http://uploads.tapatalk-cdn.com/2017...844ac666d3.jpg Alright. Well not much going on yet. Been a bit broke from christmas so waiting on pay day to get the ball rolling. Ive found the body im gonna use. Its about 3/4 of an inch too ling for wheel base so im gonna build a new ladder frame from scratch and extend the center so my mount points for the 4 link make up for the difference. I decided to draw this up on my phone today at work since we are slow. Let me know if you see a design flaw http://uploads.tapatalk-cdn.com/2017...fbb0f3d69a.jpghttp://uploads.tapatalk-cdn.com/2017...de7cd28b6e.jpg this is the donor body im going with Sent from my SM-N920P using Tapatalk |
All times are GMT -6. The time now is 05:46 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com