RCCrawler Forums

Flatty · 10-31-2009, 11:34 AM

Well the whole comp thing isn't for me, and I want to convert my crawler into a scaler. I currently have a axial setup with a torsion chassis. I want to take this and make a scaler out of it. Here is what I am hoping you guys can help me out with:

What is the best aftermarket frame for these (preferably in steel if they make it so that I can weld to it)
Does nayone make a Flatfender body for the 1:10 scale rigs?
Are the axial axles fine for this, or should I be looking at other options?
Should I go brushless, or is a brushed motor just fine? Also what sized motor should I run on here?

I am in the build process of a 52 CJ3A for a 1:1, so I was hoping to "copy" this build in a scaler. I would like to build the cage out of some reular tubing (not al). I don't know how to braze, but I can weld all day.

Thanks
DIma

canadianlimited · 10-31-2009, 02:06 PM

motor i would stay with a brushed motor. i have heard brushless not so good for water. and i know my scaler like water
as for tubing brake line 3/16 and 1/4 inch make sure not the coated stuff use the silver stuff. you can weld it, braze it and solder it

BigB_117 · 10-31-2009, 02:48 PM

The SCX10 chassis kit would be a good start, I've seen a few people weld to it, you'll just have to paint it or something afterwards.

http://www.axialracing.com/ftp/ax10o...frame_set.html

Harvo · 10-31-2009, 06:57 PM

Quote:

Originally Posted by BigB_117

The SCX10 chassis kit would be a good start, I've seen a few people weld to it, you'll just have to paint it or something afterwards.

http://www.axialracing.com/ftp/ax10o...frame_set.html

Any idea of the wheelbase on that? Website doesn't specify. :?

DonsATV · 10-31-2009, 07:46 PM

Quote:

Originally Posted by Harvo

Any idea of the wheelbase on that? Website doesn't specify. :?

The wheel base on my brand new SCX-10 is 11 5/16".

BigB_117 · 10-31-2009, 08:57 PM

Quote:

Originally Posted by Harvo

Any idea of the wheelbase on that? Website doesn't specify. :?

The stock scx10 kit is about 11.5 but that determined by the suspension links. You can use longer or shorter ones to set it where you need it.

10-31-2009, 11:34 AM	#1
Flatty Quarry Creeper Join Date: Mar 2004 Posts: 235	Few scale questions (frame, axles, body..) Well the whole comp thing isn't for me, and I want to convert my crawler into a scaler. I currently have a axial setup with a torsion chassis. I want to take this and make a scaler out of it. Here is what I am hoping you guys can help me out with: What is the best aftermarket frame for these (preferably in steel if they make it so that I can weld to it) Does nayone make a Flatfender body for the 1:10 scale rigs? Are the axial axles fine for this, or should I be looking at other options? Should I go brushless, or is a brushed motor just fine? Also what sized motor should I run on here? I am in the build process of a 52 CJ3A for a 1:1, so I was hoping to "copy" this build in a scaler. I would like to build the cage out of some reular tubing (not al). I don't know how to braze, but I can weld all day. Thanks DIma

10-31-2009, 02:06 PM	#2
canadianlimited Pebble Pounder Join Date: Jul 2007 Location: Alberta, Canada Posts: 103	motor i would stay with a brushed motor. i have heard brushless not so good for water. and i know my scaler like water as for tubing brake line 3/16 and 1/4 inch make sure not the coated stuff use the silver stuff. you can weld it, braze it and solder it

10-31-2009, 02:48 PM	#3
BigB_117 RCC Addict Join Date: Jan 2009 Location: Sebastopol CA Posts: 1,525	The SCX10 chassis kit would be a good start, I've seen a few people weld to it, you'll just have to paint it or something afterwards. http://www.axialracing.com/ftp/ax10o...frame_set.html

Sponsored Links

RCCrawler Forums

Thread: Few scale questions (frame, axles, body..)