RCCrawler Forums

jakedizzle · 06-29-2009, 10:09 PM

here is a draw up of an idea i had. all to scale. 2.2 tires. Wat do yea think?

dingaling · 06-29-2009, 10:34 PM

I like jeeps....

haha looks good!

jeepcj578 · 06-29-2009, 10:38 PM

is it going to be a cj6?
what are you going to make the body out of, metal or plastic?
might want to put some tech in here before a mod puts it in chit chat,
what axles, trans, ect......

jakedizzle · 06-29-2009, 10:41 PM

yes it is. and it is going to be metal panels and it is going to have Axial axles, trans and 2.2 axial wheels and tires. probable the novak goat crawler system but not sure yet.

jeepcj578 · 06-29-2009, 10:50 PM

Quote:

Originally Posted by jakedizzle

yes it is. and it is going to be metal panels and it is going to have Axial axles, trans and 2.2 axial wheels and tires. probable the novak goat crawler system but not sure yet.

sounds great, i don't care for 2.2 on scalers thou, but just personal opinion. i sure will keep an eye on this as i have been wanting to do a cj5 scaler of my 1:1. have you started the body yet, any pix?

peyton. · 06-29-2009, 11:01 PM

so it looks like your taking my idea jake??
wanna make twins or what???

and you told me it was 1.9???

jakedizzle · 06-29-2009, 11:41 PM

haha please. i drew it. haha dude we should make twins. that would be sick

peyton. · 06-29-2009, 11:50 PM

when we go to home depot, get twice the building supplys, i already have the chassis all scale to the degree and the length of everything,

there is drawing all over the frame of big yellow!

took me forever! (didnt know how to use a protractor?)

rckjeep · 06-30-2009, 02:03 AM

I think typing that way makes you sound un-intelligent and it looks like it's been stretched 3 feet. Definitly NOT to scale. A CJ7 has 93-94" wheelbase, not a 130" one. Do some more research on your measurments.

eron · 06-30-2009, 07:25 AM

Quote:

Originally Posted by rckjeep

I think typing that way makes you sound un-intelligent and it looks like it's been stretched 3 feet. Definitly NOT to scale. A CJ7 has 93-94" wheelbase, not a 130" one. Do some more research on your measurments.

How did you figure out the WB?

DonsATV · 06-30-2009, 10:36 AM

"The CJ6 was a full 20 inches longer than the CJ5 with a wheelbase of 101 inches to the CJ5's 81 inches."

Found here: http://www.4-the-love-of-jeeps.com/jeep-cj6.html

peyton. · 06-30-2009, 10:41 AM

not scale tires,

and our cj is lengthened, its 150ish inches long.

DonsATV · 06-30-2009, 12:45 PM

The wheelbase is 150ish inches???

The wheelbase for a 2009 F350 Super Duty Supercab LWB is 158".. The base 2009 F350 Super Duty is only 137".
http://www.fordvehicles.com/trucks/s...ions/exterior/

jakedizzle · 06-30-2009, 04:44 PM

did some fixing on the drawing and made the cage alittle taller to look more scale. and added a inner cirle in the tires for the 1.9 size tire. dont know wat tire i feel like going for. probably 1.9. looks alittle better and people say thats wat i should do. any other suggestions?

this thread is a build on another thread a buddy started. this build is based off his dads jeep. here it is if you wanna check it out.
does this seem like a good scale build???

peyton. · 06-30-2009, 09:42 PM

1.9 thomohawks!

peyton. · 06-30-2009, 09:43 PM

Quote:

Originally Posted by DonsATV

The wheelbase is 150ish inches???

The wheelbase for a 2009 F350 Super Duty Supercab LWB is 158".. The base 2009 F350 Super Duty is only 137".
http://www.fordvehicles.com/trucks/s...ions/exterior/

not the wheel base, the frame is that long,

i can get pics of me measuring it?
i dant care about wheelbase, im never going to comp it....

DonsATV · 06-30-2009, 10:08 PM

Quote:

Originally Posted by peyton.

not the wheel base, the frame is that long,

i can get pics of me measuring it?

That sounds a lot better. No you don't need to get pics of you measuring it, I trust ya.

jakedizzle · 06-30-2009, 11:29 PM

starting making this thing today. cutting all the tubes and bending them so i can braze them. tomorrow i am gunna do more and i will take some pics when i get more done and i will post them.

rckjeep · 07-01-2009, 01:53 AM

Quote:

Originally Posted by eron

How did you figure out the WB?

find a vehicle you are trying to copy measure the WB and divide by the scale you are trying to replicate said vehicle in. If you can't figure that out go kick your math teacher in the sack.

Is this person going to make the body out of styrene or buy a built body?

jakedizzle · 07-01-2009, 11:33 AM

i am gunna make this body out of aluminum or really thin steel. not too sure yet

06-29-2009, 10:09 PM	#1
jakedizzle Rock Stacker Join Date: May 2009 Location: lake elsinore Posts: 97	CJ jeep draw up. Check it out here is a draw up of an idea i had. all to scale. 2.2 tires. Wat do yea think?

06-29-2009, 10:34 PM	#2
dingaling Rock Stacker Join Date: Jul 2008 Location: RUFFNECK CRAWLERZ Denver, colorado Posts: 82	I like jeeps.... haha looks good!

06-29-2009, 10:38 PM	#3
jeepcj578 RCC Addict Join Date: Nov 2006 Location: southaven Posts: 1,934	is it going to be a cj6? what are you going to make the body out of, metal or plastic? might want to put some tech in here before a mod puts it in chit chat, what axles, trans, ect......

06-29-2009, 10:41 PM	#4
jakedizzle Rock Stacker Join Date: May 2009 Location: lake elsinore Posts: 97	yes it is. and it is going to be metal panels and it is going to have Axial axles, trans and 2.2 axial wheels and tires. probable the novak goat crawler system but not sure yet.

06-29-2009, 11:01 PM	#6
peyton. Quarry Creeper Join Date: May 2009 Location: lake elsinore Posts: 291	so it looks like your taking my idea jake?? wanna make twins or what??? and you told me it was 1.9???

06-29-2009, 11:41 PM	#7
jakedizzle Rock Stacker Join Date: May 2009 Location: lake elsinore Posts: 97	haha please. i drew it. haha dude we should make twins. that would be sick

06-29-2009, 11:50 PM	#8
peyton. Quarry Creeper Join Date: May 2009 Location: lake elsinore Posts: 291	when we go to home depot, get twice the building supplys, i already have the chassis all scale to the degree and the length of everything, there is drawing all over the frame of big yellow! took me forever! (didnt know how to use a protractor?)

06-30-2009, 02:03 AM	#9
rckjeep I wanna be Dave Join Date: Jun 2004 Location: San Jose Posts: 5,207	I think typing that way makes you sound un-intelligent and it looks like it's been stretched 3 feet. Definitly NOT to scale. A CJ7 has 93-94" wheelbase, not a 130" one. Do some more research on your measurments.

06-30-2009, 10:36 AM	#11
DonsATV RCC Addict Join Date: Apr 2009 Location: United States of the Offended Posts: 1,184	"The CJ6 was a full 20 inches longer than the CJ5 with a wheelbase of 101 inches to the CJ5's 81 inches." Found here: http://www.4-the-love-of-jeeps.com/jeep-cj6.html

06-30-2009, 10:41 AM	#12
peyton. Quarry Creeper Join Date: May 2009 Location: lake elsinore Posts: 291	not scale tires, and our cj is lengthened, its 150ish inches long.

06-30-2009, 12:45 PM	#13
DonsATV RCC Addict Join Date: Apr 2009 Location: United States of the Offended Posts: 1,184	The wheelbase is 150ish inches??? The wheelbase for a 2009 F350 Super Duty Supercab LWB is 158".. The base 2009 F350 Super Duty is only 137". http://www.fordvehicles.com/trucks/s...ions/exterior/

Sponsored Links

06-30-2009, 04:44 PM	#14
jakedizzle Rock Stacker Join Date: May 2009 Location: lake elsinore Posts: 97	did some fixing on the drawing and made the cage alittle taller to look more scale. and added a inner cirle in the tires for the 1.9 size tire. dont know wat tire i feel like going for. probably 1.9. looks alittle better and people say thats wat i should do. any other suggestions? this thread is a build on another thread a buddy started. this build is based off his dads jeep. here it is if you wanna check it out. does this seem like a good scale build???

06-30-2009, 09:42 PM	#15
peyton. Quarry Creeper Join Date: May 2009 Location: lake elsinore Posts: 291	1.9 thomohawks!

06-30-2009, 11:29 PM	#18
jakedizzle Rock Stacker Join Date: May 2009 Location: lake elsinore Posts: 97	starting making this thing today. cutting all the tubes and bending them so i can braze them. tomorrow i am gunna do more and i will take some pics when i get more done and i will post them.

07-01-2009, 11:33 AM	#20
jakedizzle Rock Stacker Join Date: May 2009 Location: lake elsinore Posts: 97	i am gunna make this body out of aluminum or really thin steel. not too sure yet

RCCrawler Forums

Thread: CJ jeep draw up. Check it out