RCCrawler Forums

justinart24 · 02-20-2011, 12:07 AM

I have been wanting to build a full tuber for a while now, no more fixing cracks cabs.

This rig will not be having IFS but just Axial axles. I also recently got a DX6i radio, plan on having some other fun channels to do some neat tricks.

This will also be my entry for 2011 Scale Nationals in Montana. Keep me in mind when voting comes up.

My inspiration...
>>>CLICK HERE<<<

Axial AX10/SCX10 Axles
- VP High Steering Knuckles Zero Acker
- Axial Clocking C-Hubs
- Super 300 CVDs
- STRC Alum Axle Lockout
Suspension
- New Era 4-Link Mounts
- 4-Link Front and Rear
- Proline Shocks
Drivetrain
- MIP DriveShafts
- Axial Trans with Alum case and all alum goodies
- VP Hurtz Shifter 3 Position Dig
Electronics
- Traxxas Velineon Brushless
- Hitec 7950 Servo (Steering)
- Hitec 5645 Winch Servo (Winch)
- CCBEC
Body
- Tube Chassis
Wheels and Tires
- 2.2 RC4WD Rox Loxs
- VP 2.2 SSZ-11 Clear
- Nova Foams

ecoli · 02-20-2011, 07:59 AM

You got my vote if you pull this off Justin

Mr Glassman · 02-20-2011, 08:13 AM

Cool, except that's not Kirby

FRENCHBLUE72 · 02-20-2011, 10:20 AM

I think it needs ifs but im sure that even with out it will still be killer as are all your builds..

floundern45rc · 02-20-2011, 10:48 AM

can't wait.

Dillpickle · 02-20-2011, 05:58 PM

THIS IS GOING TO BE SICK!

ColquittCustom405 · 02-20-2011, 10:09 PM

Where's the build pics? What the F David blain?

JonehRC · 02-20-2011, 11:18 PM

thread subscribed!
this i have 2 see .. go go Justin!

arcticjeff · 02-21-2011, 01:53 PM

I'm subscribed and looking forward to the results.

justinart24 · 02-22-2011, 02:28 PM

Quote:

Originally Posted by arcticjeff

I'm subscribed and looking forward to the results.

Thanks!

Quote:

Originally Posted by ColquittCustom405

Where's the build pics? What the F David blain?

There coming, just want to get the tube work just right.

Quote:

Originally Posted by Dillpickle

THIS IS GOING TO BE SICK!

Thanks, I hope.

Quote:

Originally Posted by floundern45rc

can't wait.

Me either.

Quote:

Originally Posted by FRENCHBLUE72

I think it needs ifs but im sure that even with out it will still be killer as are all your builds..

Na, IFS is cool, just not fore me. BTW, thanks.

Quote:

Originally Posted by Mr Glassman

Cool, except that's not Kirby

Thanks Mr Glassman. This rig is called Kirby because my childhood hero is Kirby Puckett.

Quote:

Originally Posted by ecoli

You got my vote if you pull this off Justin

Thanks man! I hope to make this sick enough to get your vote and others too.

justinart24 · 02-22-2011, 02:29 PM

I am unfortunately waiting on parts, so no real pics to post. I decided to mock the truck up in CATIA V5 to help with fitting all the electronics and etc. I designed the wheel base at 13” and body spec per the new rules. I am also thinking about running rear steer, just have to do some channel testing with my DX6i. Cool thing mocking it up in CATIA, I can print out the tube bends on paper for templates.

02-20-2011, 12:07 AM	#1
justinart24 I wanna be Dave Join Date: Feb 2009 Location: Cowtown, USA Posts: 2,780	♦♦♦♦ Project: Kirby (KOH/TTC Buggy) ♦♦♦♦ I have been wanting to build a full tuber for a while now, no more fixing cracks cabs. This rig will not be having IFS but just Axial axles. I also recently got a DX6i radio, plan on having some other fun channels to do some neat tricks.This will also be my entry for 2011 Scale Nationals in Montana. Keep me in mind when voting comes up. My inspiration... >>>CLICK HERE<<< Axial AX10/SCX10 Axles VP High Steering Knuckles Zero Acker Axial Clocking C-Hubs Super 300 CVDs STRC Alum Axle Lockout Suspension New Era 4-Link Mounts 4-Link Front and Rear Proline Shocks Drivetrain MIP DriveShafts Axial Trans with Alum case and all alum goodies VP Hurtz Shifter 3 Position Dig Electronics Traxxas Velineon Brushless Hitec 7950 Servo (Steering) Hitec 5645 Winch Servo (Winch) CCBEC Body Tube Chassis Wheels and Tires 2.2 RC4WD Rox Loxs VP 2.2 SSZ-11 Clear Nova Foams

02-20-2011, 07:59 AM	#2
ecoli I wanna be Dave Join Date: Jun 2007 Location: Canada, eh. Posts: 2,919	You got my vote if you pull this off Justin

02-20-2011, 08:13 AM	#3
Mr Glassman Rock Crawler Join Date: Nov 2005 Location: Rock-throwing country Posts: 847	Cool, except that's not Kirby

02-20-2011, 10:20 AM	#4
FRENCHBLUE72 RCC Addict Join Date: Oct 2009 Location: west coast.. Posts: 1,522	I think it needs ifs but im sure that even with out it will still be killer as are all your builds..

02-20-2011, 10:48 AM	#5
floundern45rc Pebble Pounder Join Date: Sep 2008 Location: philly Posts: 129	can't wait.

02-20-2011, 05:58 PM	#6
Dillpickle Rock Crawler Join Date: Feb 2010 Location: Chapin, South Carolina Posts: 666	THIS IS GOING TO BE SICK!

02-20-2011, 10:09 PM	#7
ColquittCustom405 I wanna be Dave Join Date: Dec 2005 Location: Orlando Posts: 7,420	Where's the build pics? What the F David blain?

02-20-2011, 11:18 PM	#8
JonehRC Pebble Pounder Join Date: Dec 2009 Location: KK Sabah North Borneo Posts: 162	thread subscribed! this i have 2 see .. go go Justin!

02-21-2011, 01:53 PM	#9
arcticjeff Quarry Creeper Join Date: Jan 2009 Location: Bay City Posts: 365	I'm subscribed and looking forward to the results.

02-22-2011, 02:29 PM	#11
justinart24 I wanna be Dave Join Date: Feb 2009 Location: Cowtown, USA Posts: 2,780	I am unfortunately waiting on parts, so no real pics to post. I decided to mock the truck up in CATIA V5 to help with fitting all the electronics and etc. I designed the wheel base at 13” and body spec per the new rules. I am also thinking about running rear steer, just have to do some channel testing with my DX6i. Cool thing mocking it up in CATIA, I can print out the tube bends on paper for templates.

Sponsored Links

RCCrawler Forums

Thread: ♦♦♦♦ Project: Kirby (KOH/TTC Buggy) ♦♦♦♦