Well, she's finished now. I have fitted the TLT wheels/tires just to see what it looks like, still undecided though. Pretty pleased with the result overall."thumbsup" http://img.photobucket.com/albums/v1...9/DSC_0205.jpg http://img.photobucket.com/albums/v1...9/DSC_0201.jpg http://img.photobucket.com/albums/v1...9/DSC_0211.jpg http://img.photobucket.com/albums/v1...9/DSC_0206.jpg http://img.photobucket.com/albums/v1...9/DSC_0204.jpg |
|
Truck Base : AMT snap-fit toyota chief 4x4 Body: AMT '80 toyota hilux ESC: ES-01 Motor(s): HS-85bb servo Servo(s):hitech HS-50 Trans: SSMT trans, cut down Axles: SSMT Tires: Aoshima Swampers WB: 4 1/2" Overall Width: 3 3/4" Diff clearance: less than 1/2 inch Center Chassis clearance: just shy of 1" Overall height: 3 1/4" Weight: 8.1 ounces haha http://i29.photobucket.com/albums/c2...pedmj/flex.jpg http://i29.photobucket.com/albums/c2...edmj/flex2.jpg http://i29.photobucket.com/albums/c2.../underside.jpg |
3 Attachment(s) heres my staticX bronco.... |
|
truck.....red neck Truck Base :custum chassis, with a tlt axil Body: clod body with a cowl induction hood, and i dont have new pics, but i have a stainless grill ESC:tekin 2 Motor: 55T Lathe Servo: Hitec 645 ms Trans:the new rustler tranns Axles: TLT-1. Springs: Jugg leaf springs Tires: swamper boggers WB: 11" Overall Width: tlt axil width Diff clearance:idk Center Chassis clearance: alot Overall height: idk Weight: about 9 lbs <p>http://i72.photobucket.com/albums/i1...IM000194sm.jpg <p>http://i72.photobucket.com/albums/i1...s/IMG_1062.jpg <p>http://i72.photobucket.com/albums/i1...s/IM000174.jpg <p>http://i72.photobucket.com/albums/i1...s/IM000184.jpg |
K2-3L Build aka midnight Truck Base :TLT w/ K2-3L chassis Body:Proline Ford Courier ESC:Novak Motor(s):Integy 55t Servo(s):Hitec Trans:Pede Axles:TLT Locked Tires:Moab 2.2 WB: 12" http://img54.imageshack.us/img54/755...ght3jt2.th.jpg http://img54.imageshack.us/img54/719...ght1ng7.th.jpg http://img54.imageshack.us/img54/218...ght2lp5.th.jpg |
Truck: Wrinkles Truck Base : Mountaineer Body: Hand formed Aluminum ESC: Novak Rooster Motor(s): Zipp 27T mod Servo(s): JR Z250 Trans: 1st Gen Losi Junior Axles: Stock Mountaineer Tires: 1/18 Nylint WB: 11 3/8" Overall Width: 10" Diff clearance: 1" :roll: Center Chassis clearance: 1 3/4" Overall height: 7 1/4" Weight: 13.5 LBS http://offroadworld.tenmagazines.com...076/151289.jpg http://offroadworld.tenmagazines.com...076/151290.jpg http://offroadworld.tenmagazines.com...076/151291.jpg http://offroadworld.tenmagazines.com...076/151292.jpg |
Truck Base : TLT Body:Nissan titan ESC:LRP Airunner (waterproof one) Motor(s):55t Servo(s):hitec 645mg. winch=savage steering one Trans:pede Axles:tlt Tires:moabs (narrowed claw dawgs to come) WB: 11.5inch Overall Width:NA Diff clearance:NA Center Chassis clearance:3.3inch Overall height:NA Weight:alot http://i2.photobucket.com/albums/y6/...4/DSC02371.jpg http://i2.photobucket.com/albums/y6/...4/DSC02362.jpg http://i2.photobucket.com/albums/y6/...4/DSC02357.jpg |
Truck Base : Bruiser Body: Toyota ESC: SR Motor(s): Integy 55t Servo(s): Hitec 9599TG Trans: Pede, locked with bearings Axles: Bruiser fronts, w/ bearings Tires: Geolanders WB: ~11 Weight: heavy http://i23.photobucket.com/albums/b3...Bruiser130.jpg http://i23.photobucket.com/albums/b3...Bruiser127.jpg http://i23.photobucket.com/albums/b3...Bruiser128.jpg http://i23.photobucket.com/albums/b3...Scalers019.jpg http://i23.photobucket.com/albums/b3...Scalers003.jpg |
Here is my Yota.. Still have a ton of work to do to it. Truck Base : TLT/ Toyota Body: Mcallister Toyota truck ESC: Mtroniks waterproof Motor(s): 22t MM motor Servo(s): Hobbico CS- 70's Trans: Emaxx Axles:TLT Tires: 2.2 swamp dawgs on Kyosho 4runner wheels WB: 12" Overall Width: 9 1/2" Diff clearance: 1 1/2" Center Chassis clearance: 3" Overall height: 8 1/2" Weight: 7lbs. http://www.rccrawlermedia.com/rcc-al...0524.sized.jpg http://www.rccrawlermedia.com/rcc-al...dium_Small.jpg http://www.rccrawlermedia.com/rcc-al...dium_Small.jpg Click for more pics Click for build thread |
http://i124.photobucket.com/albums/p...r/IMG_0935.jpg Hilift Novak Brushless Crawler system JR9000T swinging the front tires Hitec 645 shifter 4200 stick pack in frame body lift mod RC4WD narrow beadlocks RC4WD 12mm wheel wideners I loved the look so much I went right out and bought another brother."thumbsup" No no silly, the brother to this Hilift.:lol: http://i124.photobucket.com/albums/p...r/IMG_0908.jpg |
homemade aluminum ladder chassis, f650, tekin rebel 2, 55t lathe, hitec 5955, losi xx-t trans, tlt axles, imex swampers on imex wheels, 14" wheelbase, 3/4 eliptical juggy leaves in front, 4 link in rear, homemade front, rear, and rack out of 1/4" steel brakeline, heavy weight........................................... http://i74.photobucket.com/albums/i2...a/DSC00319.jpg |
Midnight Pumpkin HOTROD truck Well, I got to looking at the Tamiya M03 FWD chassis and noticed the wheelbase would be close to the Midnight Pumpkin's shell. Turns out, it was a perfect fit. I mounted some HPI "vintage" series wheels and tires to complete the look for a nice "hot-rodded" truck. Click the link below to see the truck, and a couple of others too. ENJOY. http://miamireiki.com/crawler_page.htm Cheers "Mini Cooper" M03 chassis FWD not locked Manta-Ray adjustable ball diff Midnight Pumpkin body HPI "Vintage" series rims HPI "Vintage" series tires Overall length is approx 12" |
Jugg Truck Base : Jugg Body: F-350 ESC: Super Rooster Motor(s): 2x reedy 19Turns Servo(s): ERG WRX (SANWA) Trans: JUGG Axles:JUGG Tires: 2.2 PROLINE MOAB WB: 12" Overall Width: 11 3/4" Diff clearance: 1 1/4" Center Chassis clearance: 4 1/4" Overall height: 11" http://i101.photobucket.com/albums/m...C/P1040186.jpg http://i101.photobucket.com/albums/m...C/P1040187.jpg http://i101.photobucket.com/albums/m...C/P1040195.jpg http://i101.photobucket.com/albums/m...C/P1040197.jpg http://s101.photobucket.com/albums/m80/elaz_74/RC/ |
duallie Truck Base :sassy chassis for a clod Body:modded clod ESC:novak Motor(s):old stock motor Servo(s):traxxas 2055 Trans:losi xxxnt Axles:tlt Tires:front modded nylint, rear nylint tires on a modded tlt wheel WB:12in. Overall Width:9.5in. Diff clearance:5/8in. Center Chassis clearance:1 and 3/8in. Overall height:8in. Weight:4lbs. http://www.clodtalk.com/files/100_7078_127.jpg http://www.clodtalk.com/files/100_7077_127.jpg http://www.clodtalk.com/files/100_7066_207.jpg http://www.clodtalk.com/files/100_7046_577.jpg http://www.clodtalk.com/files/100_7045_123.jpg |
My Silverado http://i105.photobucket.com/albums/m...es/ebay072.jpg Here's the specs: Bruiser chassis turned down TLT shocks RC4WD R2 tranny 35T drift motor Yokomo drift ESC Spectrum rx narrowed revolvers cut and shut dirt works Headlights http://i105.photobucket.com/albums/m...es/ebay073.jpg Maxx Flex http://i105.photobucket.com/albums/m...es/ebay074.jpg |
1 Attachment(s) Here's my latest: Hi-Lift chassis homemade IH Scout body narrowed Imex Claws homemade spoke rims Novak Crawler system |
Rubi K2-3L scaler My Rubi K2-3L -Working winch and lights. -Homemade front and rear bumpers. -Homemade rock sliders, tire carrier and roof rack. -Homemade 1.9 mashers on HPI 6mm offsets wheels -K2-3L chassis -Locked pede tranny and tlt diffs -Rebel II esc, 45T lathe w/90t spur and 21t pinion http://i141.photobucket.com/albums/r...x/IMG_1520.jpg http://i141.photobucket.com/albums/r...x/DSCN8064.jpg http://i141.photobucket.com/albums/r...x/IMG_1532.jpg |
Working on my Bruiser Truck Base : Bruiser Body: Bruiser ESC: Novak SD Motor(s): Integy 55t Servo(s): Hitec 645 Trans: Stock Bruiser Axles: Bruiser / front springs / rear 4 link Tires: M2K WB: 11.75 Overall Width: ? Diff clearance: ? Center Chassis clearance: ? Overall height: ? Weight: 10.5 Working on a winch http://i146.photobucket.com/albums/r...c/_DSC3309.jpg http://i146.photobucket.com/albums/r...c/DSCN3521.jpg |
All times are GMT -6. The time now is 09:13 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com