RCCrawler Forums

J1mny · 11-27-2011, 01:24 PM

Nice I really like the fpv stuff

rbgerrish · 12-02-2011, 02:42 PM

I finally got more cutoff wheels and put in a couple hours this morning. I finished all the doors, started the other fender, Styrene'd the rear fenders, and welded up most of the truck. (Still needs grinding) I started the behind-the-cab structure too.

Thanks for looking! About 30 hours into it so far.

adamargue · 12-03-2011, 05:52 AM

That thing is massive. Can't wait to see some video

rbgerrish · 12-09-2011, 08:06 PM

Today I ground down the bumper welds, started fabbing the hood, mounted the motor, mounted the T-case, cut out the cab wall, and started mocking up the exhaust. Pics!

Mount:

R/CMARK · 12-10-2011, 02:41 PM

I saw this thing in person about a week ago at Tammie's. It is simply bad ass! and it's HUGE. I'm excited to see it finished. Good luck and way to go!

rodney4712 · 12-10-2011, 07:27 PM

this is awesome

NissanNut · 12-10-2011, 07:58 PM

Very cool!

MTHead · 12-10-2011, 08:11 PM

Good Lord that thing is HUGE!!!!

I love it!!

TXJeeper1 · 12-11-2011, 12:59 AM

Damnit man that thing is friggin awesome.

desertmaxx · 12-11-2011, 07:08 PM

nice.......

thundaar · 01-18-2012, 08:31 PM

progress?

701 Technique · 01-18-2012, 09:24 PM

Quote:

Originally Posted by thundaar

progress?

X2, this thing is a beast!

rbgerrish · 01-18-2012, 10:53 PM

This project will resume in February, as I'm hard at work on the Portland Auto show event for Axial.

Axial and Portland International Auto Show “The Build”

Thanks!

ColquittCustom405 · 01-19-2012, 03:44 AM

I hate you......I hate all your builds too.

Nick Slemp · 01-22-2012, 06:02 PM

if you plan on runnin with that much tourqe, better fab up some steel driveshafts, cause I dont see those plastic spagetti shafts lasting too long, especially cause this thing seems to be gaining weight

rbgerrish · 01-22-2012, 09:03 PM

Quote:

Originally Posted by Nick Slemp

if you plan on runnin with that much tourqe, better fab up some steel driveshafts, cause I dont see those plastic spagetti shafts lasting too long, especially cause this thing seems to be gaining weight

The only reason MIP's arent on it is insufficient funds.

subcaptian · 02-02-2012, 01:53 PM

What a beast... If I wasn't in Alaska I'd want to see it close up!

CelicaST_CALI · 02-02-2012, 08:16 PM

Quote:

Originally Posted by rbgerrish

This project will resume in February

Ahem............................ Can't wait to see this done!

rbgerrish · 02-02-2012, 08:58 PM

Quote:

Originally Posted by CelicaST_CALI

Ahem............................ Can't wait to see this done!

Soon, I'll be making progress in a week or so.

ColquittCustom405 · 02-03-2012, 03:28 AM

I'm being serious. Where do you come up with this stuff?

01-18-2012, 08:31 PM	#71
thundaar Rock Stacker Join Date: Mar 2011 Location: powhatan Posts: 87	Re: Dorkstar Productions Presents: The Argus FPV progress?

01-18-2012, 10:53 PM	#73
rbgerrish I wanna be Dave Join Date: Mar 2004 Location: The Haunted Forest Posts: 3,586	Re: Dorkstar Productions Presents: The Argus FPV This project will resume in February, as I'm hard at work on the Portland Auto show event for Axial. Axial and Portland International Auto Show “The Build” Thanks!

01-19-2012, 03:44 AM	#74
ColquittCustom405 I wanna be Dave Join Date: Dec 2005 Location: Orlando Posts: 7,420	Re: Dorkstar Productions Presents: The Argus FPV I hate you......I hate all your builds too.

01-22-2012, 06:02 PM	#75
Nick Slemp Pebble Pounder Join Date: May 2008 Location: El Monte Posts: 177	Re: Dorkstar Productions Presents: The Argus FPV if you plan on runnin with that much tourqe, better fab up some steel driveshafts, cause I dont see those plastic spagetti shafts lasting too long, especially cause this thing seems to be gaining weight

02-02-2012, 01:53 PM	#77
subcaptian Newbie Join Date: Jun 2011 Location: Kasilof, AK Posts: 2	Re: Dorkstar Productions Presents: The Argus FPV What a beast... If I wasn't in Alaska I'd want to see it close up!

11-27-2011, 01:24 PM	#61
J1mny Newbie Join Date: Apr 2011 Location: Prescott Valley Posts: 3	Nice I really like the fpv stuff

12-02-2011, 02:42 PM	#62
rbgerrish I wanna be Dave Join Date: Mar 2004 Location: The Haunted Forest Posts: 3,586	I finally got more cutoff wheels and put in a couple hours this morning. I finished all the doors, started the other fender, Styrene'd the rear fenders, and welded up most of the truck. (Still needs grinding) I started the behind-the-cab structure too. Thanks for looking! About 30 hours into it so far.

12-03-2011, 05:52 AM	#63
adamargue RCC Addict Join Date: Nov 2009 Location: Tulsa Posts: 1,667	That thing is massive. Can't wait to see some video

12-09-2011, 08:06 PM	#64
rbgerrish I wanna be Dave Join Date: Mar 2004 Location: The Haunted Forest Posts: 3,586	Today I ground down the bumper welds, started fabbing the hood, mounted the motor, mounted the T-case, cut out the cab wall, and started mocking up the exhaust. Pics! Mount:

12-10-2011, 02:41 PM	#65
R/CMARK Pebble Pounder Join Date: Nov 2011 Location: Oregon City Posts: 112	I saw this thing in person about a week ago at Tammie's. It is simply bad ass! and it's HUGE. I'm excited to see it finished. Good luck and way to go!

12-10-2011, 07:27 PM	#66
rodney4712 Newbie Join Date: Jan 2008 Location: hollister Posts: 30	this is awesome

12-10-2011, 07:58 PM	#67
NissanNut Pebble Pounder Join Date: Sep 2006 Location: Allen Posts: 156	Very cool!

12-10-2011, 08:11 PM	#68
MTHead DOOH!!! Join Date: Feb 2007 Location: AZ Posts: 2,105	Good Lord that thing is HUGE!!!! I love it!!

12-11-2011, 12:59 AM	#69
TXJeeper1 Quarry Creeper Join Date: Dec 2009 Location: Nacanowhere Texas Posts: 494	Damnit man that thing is friggin awesome.

12-11-2011, 07:08 PM	#70
desertmaxx Quarry Creeper Join Date: Sep 2010 Location: t(._.t) Posts: 465	nice.......

Sponsored Links

02-03-2012, 03:28 AM	#80
ColquittCustom405 I wanna be Dave Join Date: Dec 2005 Location: Orlando Posts: 7,420	Re: Dorkstar Productions Presents: The Argus FPV I'm being serious. Where do you come up with this stuff?

RCCrawler Forums

Thread: Dorkstar Productions Presents: The Argus FPV