RCCrawler Forums

jamesdicken · 02-05-2008, 10:40 AM

i live in gilbert

i have a ax-10 2.2

its mostly stock except the shocks and rear links.

its four linked and i moved everything around to get a better cog. of course got the saddle pac bat .added some weight to the wheels cut the foams moved the lower links inboard cut up the bat tray and moved it down. you know the usual.

i mess around near my house and every where i go. i am gunna try to get to more P.A.R.C. comps. i went to the last one in dec and it was cool so see you there.

edit:every thing above is a lie.my baby is built

xaruum · 03-04-2008, 07:00 PM

Hey all,

Just getting back to the hobby again. Live in Mesa.

12" - tlt axles, stampede tranny, single vertical plate chassis, 4ws
16" - clod axles, custom chassis/susp, 4ws
18" - xf axles, custom trans, custom chassis/susp, 4ws

Backyard Crawling for a while now.

RJD4CARS · 03-06-2008, 02:04 PM

Hi,

Prescott, Yavapai

2.2s

SW2
Axial Beadlocks
Masher 2000 M3 Tires
Integy 55t
Pede Tranny
Droop suspension
Modified T maxx shocks
Aluminium Knuckles
Hitec 5645 Servo
Moped Esc (it won't die!)
DX3
7.2v 2/3A Saddle Pack

SW3
Revolver Wheels
Moabs/Claws
Integy 55t
AX10 Tranny
Integy 5645
RCP CVDs Up Front
RCP Max Turn Knuckles
Modified Tmaxx Shocks
Losi springs
DX3
8.4V 2/3a Saddle Pack
Sidewinder

Super:
Crawford Performance Claw
Tamiya Locked Axles
Integy 65T
Aluminum Axle Outers and Knuckles
Hitec 5645
Proline Beadlocks
Moabs
Full Four Wheel Sterring
Modified Traxxas 3 Channel
XL1

Crawl spots:
Side Yard
Watson Lake

Comps:
Not Yet

ncgoose · 03-31-2008, 06:56 PM

Hi,

Chandler, Maricopa

2.2

AX-10
Axial Beadlocks
Integy 55t
Hitec 5955TG Servo
LRP AI Esc
DX3R
Team Orion 4500 Rocket pack

Crawl spots:
backyard
front yard

Comps:
Not Yet

I bought the kit on Sunday and just got it all going today. This is my first crawler and I look forward to the gtg's. I am just getting back into R/C after a 8 year layoff. If any of you race offroad at SRS I will see you all there soon, campaigning Jayson Pangs old XXX CR and XXXT CR prototype.

One last thing, damn crawling is addictive. I know this will not be my last crawler.

pencrazy · 04-08-2008, 12:22 AM

north phoenix
just started crawling picked me up a axial off craigslist
drive at : papago,7th and deer valley,and cave creek
2.2 axial
pretty much stock
integy motor
futaba servos

yz120 · 07-27-2008, 03:18 PM

lake havasu!
my son and i are new to crawlin and having alot of fun doing so.

shaggy · 07-29-2008, 12:11 AM

Phoenix glendale area.
Brand new into the rock crawling
Building a axial artr
Brother has the axial rtr

Where
Backyard
& Off of care free and 7th street

Redlinerob · 08-01-2008, 10:44 PM

Prescott, Az
Been crawling for two years now
N.A.R.C.C.A Competition Director
Proud Member of P.A.R.C.
CKRC Team Driver

HR MOA
GC2 1.9 MRC
Fubar Mini Skeeter 1.9 MRC
Yota Scaler
Slash ( Brushless )

Granite Dells / Watson Lake
All over Arizona
Arizona Summer Shootout '08 , '09
Moab '08 Nats
Nevada State Championships '08
WCC '09
Worlds '09

VIOLENTJR · 08-05-2008, 12:27 PM

Hello
Surprise,AZ
Axial scorpion kit final finished today.
lots of time spent at speedworld's Nitro pit with my 1/8 scale truggy and my wifes buggy.

captainax10 · 08-05-2008, 02:30 PM

Gilbert, AZ

AX-10.
Integy 65t. VF digg. Straight Axle adaptors. Straight CVDs. Clockable C's. High Clearance knuckles. 4 link suspension. Panther tires. Axial Cvd's.

2JSC · 08-06-2008, 01:01 AM

The AX10 tuber project I was talking about -> Poison IVY

Rokbitr · 08-12-2008, 11:21 AM

City: Flagstaff
County: Coconino
Crawler: 2.2 Axial ARTR chassis, Integy 55T, suspension upgrades
Spots: Around my apartment complex, Buffalo Park, and Sedona/Oak Creek Canyon
Comps: Not yet, but hopefully soon

Pic:

J.DUKE · 08-15-2008, 10:30 PM

Hello. I'm new(ly addicted) to crawling. here my short list...

Scorpion RTR
Integy 55t
Losi shocks
TCS 4 link
STRC aluminum links (silver)
STRC aluminum skidplate (silver)
XC-1 body
Hitec Servo
Sexy wiring

Right by the law library at ASU, theres a 3 story tall hill covered in rocks the size of watermelons.

In guadalupe, about 1 mile south of the AZ Mills Mall, theres a place that sells rocks cheap. Build your own...

gpage13 · 08-27-2008, 11:33 AM

Gilbert, AZ (Pecos & Recker)

AX-10 Kit(first RC kit I've built)
Integy 45T Lathe motor
Novak Rooster Crawler edition
Futaba 2PH radio
Futaba S3003 Servo (going to upgrade to a HITECH 645MG in a few weeks)
built the Tranny in a mirrored config to help with torque twist
built the shocks in the limited travel config
stock wheels and tires

bolibruch1 · 09-03-2008, 10:43 AM

ax10 rtr to start just getting into this and I love it!

integrity 55t

JR Z650M High-Torque Metal Gear Servo

I live in Tempe

all over papago

overkillphil · 09-04-2008, 10:07 PM

I crawl any of the crazy rocks around town. Haven't been in a comp yet, but my rig crawls alright. Typical AX10, Novak 55/ Rooster Crawler, Losi Claws (worn out though, new ones on the way), twin mini LST packs (lots of run time, droop setup in front, soft springs in rear. Dig setup coming soon!

jays96xj · 09-04-2008, 10:47 PM

i live in phoenix. i have a clod buster with 55t motors,locked axles,nn chassis,16 inch wheel base,evx esc,futaba radio,emaxx shocks,f-650 body,moab xls.

c.kisner · 09-10-2008, 09:25 PM

hey guys,

i live in gilbert and work in tempe. me and a friend both have scorpions w/ misc mods, wheel weights, shocks, split batteries and all, try this and try thats.....oh yeah and the tires

do a lot of trips to the papago spots, we meet up and crawl every wednesday eve after work around 5-6 for a few hours or so.

anyone checked out the crawlin rock setup in hobby action, pretty good, but beware you will buy something new by the end.

if anyone is interested in meeting up, we go every wednesday, tonight was big hole in the rock@papago , we both broke later than earlier, so had fun!!!

heres a vid from a few months ago, you all know the spot tho:
http://www.youtube.com/watch?v=ffwgCPLih-k
enjoy
c.kisner

Lilbro · 09-22-2008, 06:06 PM

RTR AX-10 Slight mods.

Crawling over bricks in the front yard.

mikedoug · 09-30-2008, 11:08 AM

My name is Jed and I live in Tempe

AX-10 kit set up
645mg servo
novak 55 turn motor and associated lrp speed control
modded skid, losi shocks, 60wt all around with white springs in front and traxxas reds in back
home made ghetto link and saddle pack plates with help from my buddy bolibruch1
Aluminum front knuckles and C's
hammer m3's softened up with 9 oz in each front and 6.5oz in each rear

crawlin' at papago new and old, and at hobby action....met up with jamesdicken there this weekend, he's a cool dude with a sick rig.....

02-05-2008, 10:40 AM	#21
jamesdicken Rock Crawler Join Date: Dec 2007 Location: GILBERT Posts: 751	i live in gilbert i have a ax-10 2.2 its mostly stock except the shocks and rear links. its four linked and i moved everything around to get a better cog. of course got the saddle pac bat .added some weight to the wheels cut the foams moved the lower links inboard cut up the bat tray and moved it down. you know the usual. i mess around near my house and every where i go. i am gunna try to get to more P.A.R.C. comps. i went to the last one in dec and it was cool so see you there. edit:every thing above is a lie.my baby is built Last edited by jamesdicken; 08-06-2008 at 12:44 AM.

08-01-2008, 10:44 PM	#28
Redlinerob Pebble Pounder Join Date: Apr 2008 Location: On the Rocks Granite Dells Posts: 177	Prescott, Az Been crawling for two years now N.A.R.C.C.A Competition Director Proud Member of P.A.R.C. CKRC Team Driver HR MOA GC2 1.9 MRC Fubar Mini Skeeter 1.9 MRC Yota Scaler Slash ( Brushless ) Granite Dells / Watson Lake All over Arizona Arizona Summer Shootout '08 , '09 Moab '08 Nats Nevada State Championships '08 WCC '09 Worlds '09 Last edited by Redlinerob; 09-09-2009 at 04:45 PM. Reason: updated

08-05-2008, 02:30 PM	#30
captainax10 Newbie Join Date: Jul 2008 Location: gilbert Posts: 0	ax10 Gilbert, AZ AX-10. Integy 65t. VF digg. Straight Axle adaptors. Straight CVDs. Clockable C's. High Clearance knuckles. 4 link suspension. Panther tires. Axial Cvd's.

08-15-2008, 10:30 PM	#33
J.DUKE Rock Crawler Join Date: Jul 2008 Location: Dutch Oven - AZ Posts: 500	Tempe Newbie Hello. I'm new(ly addicted) to crawling. here my short list... Scorpion RTR Integy 55t Losi shocks TCS 4 link STRC aluminum links (silver) STRC aluminum skidplate (silver) XC-1 body Hitec Servo Sexy wiring Right by the law library at ASU, theres a 3 story tall hill covered in rocks the size of watermelons. In guadalupe, about 1 mile south of the AZ Mills Mall, theres a place that sells rocks cheap. Build your own... Last edited by J.DUKE; 08-26-2008 at 09:12 AM. Reason: adding a pic

08-27-2008, 11:33 AM	#34
gpage13 Newbie Join Date: Jul 2008 Location: Gilbert Posts: 3	New Crawler in Gilbert Gilbert, AZ (Pecos & Recker) AX-10 Kit(first RC kit I've built) Integy 45T Lathe motor Novak Rooster Crawler edition Futaba 2PH radio Futaba S3003 Servo (going to upgrade to a HITECH 645MG in a few weeks) built the Tranny in a mirrored config to help with torque twist built the shocks in the limited travel config stock wheels and tires

03-04-2008, 07:00 PM	#22
xaruum Pebble Pounder Join Date: Apr 2006 Location: Mesa Posts: 121	Hey all, Just getting back to the hobby again. Live in Mesa. 12" - tlt axles, stampede tranny, single vertical plate chassis, 4ws 16" - clod axles, custom chassis/susp, 4ws 18" - xf axles, custom trans, custom chassis/susp, 4ws Backyard Crawling for a while now.

03-06-2008, 02:04 PM	#23
RJD4CARS Newbie Join Date: Apr 2007 Location: Prescott Posts: 7	Hi, Prescott, Yavapai 2.2s SW2 Axial Beadlocks Masher 2000 M3 Tires Integy 55t Pede Tranny Droop suspension Modified T maxx shocks Aluminium Knuckles Hitec 5645 Servo Moped Esc (it won't die!) DX3 7.2v 2/3A Saddle Pack SW3 Revolver Wheels Moabs/Claws Integy 55t AX10 Tranny Integy 5645 RCP CVDs Up Front RCP Max Turn Knuckles Modified Tmaxx Shocks Losi springs DX3 8.4V 2/3a Saddle Pack Sidewinder Super: Crawford Performance Claw Tamiya Locked Axles Integy 65T Aluminum Axle Outers and Knuckles Hitec 5645 Proline Beadlocks Moabs Full Four Wheel Sterring Modified Traxxas 3 Channel XL1 Crawl spots: Side Yard Watson Lake Comps: Not Yet

03-31-2008, 06:56 PM	#24
ncgoose Rock Stacker Join Date: Mar 2008 Location: Chandler Posts: 95	Hi, Chandler, Maricopa 2.2 AX-10 Axial Beadlocks Integy 55t Hitec 5955TG Servo LRP AI Esc DX3R Team Orion 4500 Rocket pack Crawl spots: backyard front yard Comps: Not Yet I bought the kit on Sunday and just got it all going today. This is my first crawler and I look forward to the gtg's. I am just getting back into R/C after a 8 year layoff. If any of you race offroad at SRS I will see you all there soon, campaigning Jayson Pangs old XXX CR and XXXT CR prototype. One last thing, damn crawling is addictive. I know this will not be my last crawler.

04-08-2008, 12:22 AM	#25
pencrazy Rock Stacker Join Date: Mar 2008 Location: northdale Posts: 81	north phoenix just started crawling picked me up a axial off craigslist drive at : papago,7th and deer valley,and cave creek 2.2 axial pretty much stock integy motor futaba servos

07-27-2008, 03:18 PM	#26
yz120 Rock Stacker Join Date: Jul 2008 Location: the zone Posts: 55	lake havasu! my son and i are new to crawlin and having alot of fun doing so.

07-29-2008, 12:11 AM	#27
shaggy Quarry Creeper Join Date: Jun 2008 Location: Phoenix Posts: 214	Phoenix glendale area. Brand new into the rock crawling Building a axial artr Brother has the axial rtr Where Backyard & Off of care free and 7th street

08-05-2008, 12:27 PM	#29
VIOLENTJR Newbie Join Date: Jul 2008 Location: Surprise,AZ Posts: 36	Hello Surprise,AZ Axial scorpion kit final finished today. lots of time spent at speedworld's Nitro pit with my 1/8 scale truggy and my wifes buggy.

08-06-2008, 01:01 AM	#31
2JSC I wanna be Dave Join Date: May 2006 Location: FOUR 8 OH Posts: 4,912	The AX10 tuber project I was talking about -> Poison IVY

08-12-2008, 11:21 AM	#32
Rokbitr Newbie Join Date: Jun 2008 Location: Flagstaff Posts: 36	City: Flagstaff County: Coconino Crawler: 2.2 Axial ARTR chassis, Integy 55T, suspension upgrades Spots: Around my apartment complex, Buffalo Park, and Sedona/Oak Creek Canyon Comps: Not yet, but hopefully soon Pic:

09-03-2008, 10:43 AM	#35
bolibruch1 Rock Stacker Join Date: Aug 2008 Location: (rock garden) Tempe Posts: 55	ax 10 rtr ax10 rtr to start just getting into this and I love it! integrity 55t JR Z650M High-Torque Metal Gear Servo I live in Tempe all over papago

Sponsored Links

09-04-2008, 10:07 PM	#36
overkillphil Newbie Join Date: Feb 2006 Location: Kingman Posts: 31	I crawl any of the crazy rocks around town. Haven't been in a comp yet, but my rig crawls alright. Typical AX10, Novak 55/ Rooster Crawler, Losi Claws (worn out though, new ones on the way), twin mini LST packs (lots of run time, droop setup in front, soft springs in rear. Dig setup coming soon!

09-04-2008, 10:47 PM	#37
jays96xj Newbie Join Date: Oct 2006 Location: phoenix Posts: 30	i live in phoenix. i have a clod buster with 55t motors,locked axles,nn chassis,16 inch wheel base,evx esc,futaba radio,emaxx shocks,f-650 body,moab xls.

09-10-2008, 09:25 PM	#38
c.kisner Newbie Join Date: Jul 2008 Location: AZ Posts: 3	hey guys, i live in gilbert and work in tempe. me and a friend both have scorpions w/ misc mods, wheel weights, shocks, split batteries and all, try this and try thats.....oh yeah and the tires do a lot of trips to the papago spots, we meet up and crawl every wednesday eve after work around 5-6 for a few hours or so. anyone checked out the crawlin rock setup in hobby action, pretty good, but beware you will buy something new by the end. if anyone is interested in meeting up, we go every wednesday, tonight was big hole in the rock@papago , we both broke later than earlier, so had fun!!! heres a vid from a few months ago, you all know the spot tho: http://www.youtube.com/watch?v=ffwgCPLih-k enjoy c.kisner

09-22-2008, 06:06 PM	#39
Lilbro Newbie Join Date: Sep 2008 Location: Phoenix Posts: 2	RTR AX-10 Slight mods. Crawling over bricks in the front yard.

09-30-2008, 11:08 AM	#40
mikedoug Newbie Join Date: Sep 2008 Location: hot Posts: 27	My name is Jed and I live in Tempe AX-10 kit set up 645mg servo novak 55 turn motor and associated lrp speed control modded skid, losi shocks, 60wt all around with white springs in front and traxxas reds in back home made ghetto link and saddle pack plates with help from my buddy bolibruch1 Aluminum front knuckles and C's hammer m3's softened up with 9 oz in each front and 6.5oz in each rear crawlin' at papago new and old, and at hobby action....met up with jamesdicken there this weekend, he's a cool dude with a sick rig.....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

RCCrawler Forums

Thread: All Arizona Crawlers Post Up...